9100 Rotary Switches 16A 250Vac 2 to 6 way rotary switch 16(4)A 250Vac T125 16A 400Vac T125 8(8)A 250Vac T125 5E4 (50,000 Operations) Ratings up to 16A, 250V ac; 20A, 28V dc UL CSA 20A Non Ind 277Vac, 250Vac 2hp, 125Vac 1hp UL85C, file no. E45221, CSA file no. LR10990 Pairs of single pole change over contacts Wide choice of switching circuits In house test 30A 12V dc RoHS RoHS compliant Can be stacked together 9100 switches are highly versatile with up to 6 positions at 30 intervals and 6 terminals per switch. For more complex switching (7 positions & over), contact the factory. Two switches may be stacked to give up to 12 terminal switching. 3mm contact gap. Technical data on pages 4 & 5. C 9 5 01 D A Stop at 120 TERMINAL SERIES POSITIONS CIRCUIT SPINDLE BODY OPTIONS CODE CODE CODE CODE CODE CODE ORDER FORMAT TERMINAL SERIES POSITION C 2 Switching positions 9.2 CIRCUIT 9100 switches offer almost infinite switching options SPINDLE A o6.0 4.5 A/F 26.0 o6.0 4.5 A/F 22.0 o6.0 4.5 A/F 10.8 o6.05 4.65 A/F 12.2 For this reason it is impractical to show all the options available. B The table below gives an example of a 5 position switching sequence: OFF, 1, 1+2, 1+2+3, 1+2+3+4 6.3 x 0.8 C Off Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 3 Switching positions 1 D A 2 3 B 4 9 H Switching positions 15 o6.0 4.65 5 A /F Use the blank table to plan your switching up to 6 positions. N 4.5 A/F o6.0 Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 4.5 o6.0 A/F 12.2 20.1 for 2 gang switching 1 2 S Switching positions 5 4. /F A 6 45 A 23.0 R For approval information on H terminals, contact the factory. Simple circuits may not use all terminals. Unnecessary terminals may be omitted. o6.0 4.5 A/F Switching positions 20.0 P 5 4.8 x 0.8 12.2 The code for your chosen circuit will be allocated by our technicians. Please contact the factory for details. 9.2 M 4 3 o6.0 10.8 B 4 L 64 ARCOLECTRIC CORPORATION 31-315 Plantation Drive, Thousand Palms, CA 92276 Tel: 760-343-3650 Fax: 760-343-3651 email: info@arcolectric.com supplied without spindle Off Pos 1 Pos 2 9201 Off Pos 1 Pos 2 9202 1 Off Pos 1 Pos 2 9203 Off Pos 1 Pos 2 9204 A Off Pos 1 Pos 2 Pos 3 9304 1 1 1 A Off Pos 1 Pos 2 Pos 3 9301 1 A A A 2 3 2 2 3 3 B 1 A 2 Off Pos 1 Pos 2 Pos 3 9305 B B 4 OFF, 1+2 OFF, 3 Off Pos 1 Pos 2 Pos 3 9313 OFF, 1+3 Off Pos 1 Pos 2 Pos 3 Pos 4 9401 3 OFF, 2+3, 2+3+4 Off Pos 1 Pos 2 Pos 3 Pos 4 9407 OFF, 1, 2+3, 1+3 9408 9409 1 OFF, 1, 1+2, 1+2+3 Off Pos 1 Pos 2 Pos 3 Pos 4 2 3 3 B OFF, 1, 2, 3 1, 2, 3, 4 Off Off Pos 1 Pos 2 Pos 3 Pos 4 9423 9501 1 1 A A OFF, 3, 1+3, 1+2+3 BODY 3 B OFF, 1, 2, 1+3, 1+3+4 Panel clearance Custom spindles Custom spindles of any length, with or without a "D" flat, can be produced from our infinitely variable tooling. The flat can be at any angle. 9509 Off Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 1 A 2 3 3 3 B B 4 4 OFF, 1+4, 1+3, 2+3, 1+2+3 OFF, 1, 1+2, 1+3, 1+2+3 OFF, 4, 1+4, 3+4, 1+3+4 DIMENSIONS (mm) Spindle Movement 3600 in 300 intervals 6.3x0.8 tabs Pos 1 Pos 2 2 A 1 2.5AF Hex hole 9.2 2 off No4 / 3.0mm self tapping screws 5.0mm min penetration into switch body. A spacer can be fitted to the switch body to increase the clearance between the mounting panel and switch terminals. OFF, 1+2, 1+4, 1+2+4 1 2 May be fitted at any of the index positions to limit the maximum angle of rotation. 4 1 A Anti-rotation stops Off Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 A 2 B 4 OFF,1,1+2,1+2+3,1+2+3+4 9505 1 3 B Standard 2 hole fixing Recommended fixing 9504 Off Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 A A 2 Holes O / 3.2 B OFF, 1+2, 1+4, 1+2+3+4 OFF, 1, 3, 1+3 2 OPTIONS 28.0 14.0 O / 8.5 B 4 1 4 OFF, 1, 2, OFF Off Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 A 2 3 B 9503 1 A 2 2 B OFF, 4, 1+4, 1+2+4 Off Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 2 3 4 OFF, 3, 4, 3+4 Off Pos 1 Pos 2 Pos 3 Pos 4 1 A 2 B 4 Off Pos 1 Pos 2 Pos 3 Pos 4 9421 A 3 B OFF, 1+4, 2+4, 3+4 1 1 A 3 4 Off Pos 1 Pos 2 Pos 3 Pos 4 9419 2 B 4 OFF, 1+3, 1+4, 1+3+4 Off Pos 1 Pos 2 Pos 3 Pos 4 9414 A A 2 4 OFF, 1, 1+4, 1+2+4 1 1 A 9422 Off Pos 1 Pos 2 Pos 3 Pos 4 9411 3 B 4 OFF, 3, 3+4 Pos 1 Pos 2 Pos 3 Pos 4 2 3 4 4 A B B B B 1 A 2 3 3 B Off Pos 1 Pos 2 Pos 3 Pos 4 9405 7.0 3 B 1, OFF, 2 1 1 2 2 Off Pos 1 Pos 2 Pos 3 Pos 4 9404 A A A 2 1+3, OFF, 2+4 Off Pos 1 Pos 2 Pos 3 Pos 4 9403 1 1 A OFF, 1, 1+2 Off Pos 1 Pos 2 Pos 3 Pos 4 9402 9.2 Off Pos 1 Pos 2 Pos 3 32.0 OFF, 1 9312 4 B 3 18.5 28.0 32.3 35.6 Stacked Switches 4 For more complex switching a second switch may be stacked on the first. 3 B 12.4 18.5 For all options call the factory. ARCOLECTRIC CORPORATION 31-315 Plantation Drive, Thousand Palms, CA 92276 Tel: 760-343-3650 Fax: 760-343-3651 email: info@arcolectric.com Note In the circuits on this page, the symbol shows the position of the switch cam, NOT the position of the spindle flat. 65