TOSHIBA TLP1201A,TLP1201A(C1),TLP1201A(C2) TOSHIBA PHOTOINTERRUPTER INFRARED LED + PHOTO IC TLP1201A, TLP1201A(C1), TLP1201A(C2) COPYING MACHINE, LASER BEAM PRINTER FACSIMILE, PRINTER AUTOMATIC VENDING MACHINE, TERMINAL EQUIPMENT IN BANKING FACILITIES PLAYING EQUIPMENT, FA EQUIPMENT VARIOUS POSITION DETECTION SENSOR The TLP1201A, 1201A (C1) and 1201A (C2) are digital output photointerrupters having connectors with an GaAs infrared LED and a high sensitivity and low current consumption Si photo IC combined. The output becomes high level when the light is shielded. @ One side mounting type e 6Supply voltage :5V @ Digital output (Open collector) Gap : 5mm e Resolution : Slit width 0.5mm e = Low current consumption : Iq=17.5mA (max) @ UL recognized PWB adopted : UL94V-0 @ Material of the case : Polycarbonate Connectors TLP1201A ....... 171825-3 (AMP (Japan), Ltd. made EI Connector) TLP1201A (C1) ... 5267-03A (Molex Japan Co., Ltd. made Connector) TLP1201A (C2) .... B3P-SHF-1AA (Japan Solderless Terminal MFG. made NH Connector) MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL | RATING | UNIT Supply Voltge Vcc 6 Vv Output Voltage Vo 28 V Low Level Output Current Io, 50 mA Low Level Output Current Derating (Ta>25C) AIQL C | 0.67 )mA/C Operating Temperature Range Topr 25~75 C Storage Temperature Range Tstg 40~85 C 961001EBC2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. @ The products described in this document are subject to foreign exchange and foreign trade control laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1997-12-10 1/8TOSHIBA OUTLINE DRAWINGS TLP1201A,TLP1201A(C1),TLP1201A(C2) Unit in mm (2R1.5) /]13.240.2 7.0402 14.0+0.2 92-05 5 40.15 +0. 05201 | ls .0-0.1 | 4540.15 suit wioty| fl | & TTI] TL. SENSOR CENTER[[I N st i S m t +) I 3 o I _ Fi itt on) Pie lin pit ~)] i321 mah y Lf wt TP Nos 8 [Ft = ~ +4 2.5 2.5 q +0 n 2) | | p4.0-0.15 TLP1201A ( ) : REFERENCE VALUE TLP1201A (C1) (| ) : REFERENCE VALUE 3 11.040.1 12.040.1 GA2402 5 4) pop Sl 110401120401 34.2402 S at a -- y Pe Te 2 2 & 13.2402 = R1 13.240.2 2 7.0+0.2 (2-R1.5) 34.1403 | 4 3540.15 +o wl 72E0? 14.0+0.2 080.1 | ~ 14.0402 59 053 540.15 L 5.9207] 4540.45 a OTH & 40.2 05201 lhe m SENSOR CENTER SAP t [a5 0.15 sens MoH | LS J. (itlee> ff I ee wl o 4 + o a ey port 13 #2 | __ i muy j til (I 8 | de Ft 3 Ti 2 TX c(0.5) @ 2 5 ns y 3 2 5] 25.1] Ls 0 "Kos Sg = S +0 4 t S = wu! /25 25 a Iv 4.0-0.15 is # + i 2 $4.0-0.15 3-g07 JEDEC _ JEDEC EIAJ EIAJ TOSHIBA 11-14C5 TOSHIBA 11-14C6 TLP1201A (C2) Weight : 2.6g (typ.) 2 4.2402 Fi] 14.0+0.1120+0.1 : 2 = PIN CONNECTION (_ ) : REFERENCE VALUE JEDEC _ EIAJ TOSHIBA 11-14C7 1997-12-10 2/8TOSHIBA TLP1201A,TLP1201A(C1),TLP1201A(C2) RECOMMENDED OPERATING CONDITIONS CHARACTERISTIC SYMBOL | MIN. TYP. MAX. | UNIT Supply Voltage Vcc 45 5.0 5.5 Vv Output Voltage Vo 5 17 V Low Level Output Current Ion 16 mA Operating Temperature Topr 25 75 C OPTO-ELECTRICAL CHARACTERISTICS (Unless Otherwise Specified, Ta= -25~75C, Vcc =5V + 10%) CHARACTERISTIC SYMBOL TEST CONDITION MIN. | TYP. | MAX. | UNIT Supply Voltage Vcc 4.5 5.0 5.5 Vv Supply High Level | Iccy | Shutter In _ | 17.5 mA Current Low Level IccL | Without Shutter | 175 High level | Voy _ | Shutter In, RL, =47k0 0.9VcC | _ Output Without Shutter , . . Vv Voltage Lew level VOL IoL= 16mA, Ta=25C 0.07 | 0.38 Without Shutter, Io, =16mA 0.4 Peak Emittion Wavelength Ap Ta=25C, LED Side 940 | nm Peak Sensitivity Wavelength | Ap Ta=25C, Photo IC Side 900 | nm Response Frequency f Ta=25C, Ry, =47k0. (Note) | 3000 Hz Rise Time ty 8] Ls Fall Time te 0.03 | (Note) A value measured when the disc shown in the following figure was rotated. No DC current should be output. 1997-12-10 3/8TOSHIBA OPTICAL SHUTTER DISC ra 4 SENSOR CENTER PRODUCT INDICATION i fo) 3 \ \ / MES r 0.5mm/|| 0.5mm 2.5mm TLP1201A,TLP1201A(C1),TLP1201A(C2) TYPE ABBREVIATION CT OR TLP1201A P1201A NO INDICATED TLP1201A (C1) P1201A C1 MODEL NAME TLP1201A (C2) P1201A C2 MONTHLY PRODUCTION LOT eors ca La Y/ ca Loa a rc . |! PRODUCTION MONTH a TERMINAL STRENGTH (Ta = 25C) (JAN.-DEC. ARE INDICATED BY ALPHABETES OF A-L) PRODUCTION YEAR (LAST DIGIT OF A.D. IS INDICATED) CONNECTOR CLASSIFICATION STAMP COLOR : SILVER CHARACTERISTIC TEST CONDITION LIMIT DIRECTION A PULL WEIGHT 19.6N NO DEFECT OF TIME 5s /ONCE s ELECTRICAL DIRECTION B CHARACTERISTICS BEND WEIGHT 9.8N TIME 5s /THRICE anf. 1997-12-10 4/8TOSHIBA TLP1201A,TLP1201A(C1),TLP1201A(C2) PRECAUTION Please be careful of the followings. 1. During 100s after turning on Vcc, output voltage changes for stabilizing the inner circuit. 2. When installing, avoid to work by holding the connector by hand. Always, install by holding the main body of the element while assuring the mounting board is not warped or twisted. The connectors shall be inserted or pulled out at normal temperature. 3. Screw shall be tightened to clamping torque of 0.59N-m. 4, The container is made of polycarbonate. Polycarbonate is usually stable with acid, alcohol, and aliphatic hydrocarbons however, with pertochemicals (such as benzene, toluene, and acetone), alkali, aromatic hydrocarbons, or chloric hydrocarbons, polycarbonate becomes cracked, swollen, or melted. Please take care when chosing a packaging material by referencing the table below. PHENOMENON CHEMICALS Little deterioration A ws but staining nitric acid (low concentration), hydrogen peroxide, chlorine B Cracked, crazed, or swollen acetic acid (70% or more) gasoline methyl ethyl ketone, ehtyl acetate, butyl acetate ethyl methacrylate, ethyl ether, MEK acetone, m-amino alcohol, carbon tetrachloride carbon disulfide, trichloroethylene, cresol thinners, oil of turpentine triethanolamine, TCP, TBP Melted { }: Used as solvent. 7 concentrated sulfuric acid benzene styrene, acrylonitrile, vinyl acetate ethylenediamine, diethylenediamine chloroform, methyl chloride, tetrachloromethane, dioxane, | 1, 2-dichloroethane | D Decomposed ammonia water other alkali 1997-12-10 5/8TOSHIBA TLP1201A,TLP1201A(C1),TLP1201A(C2) RECOMMENDABLE MATCHED CONNECTOR TLP1201A AMP (Japan), Ltd. made EI series connector (Standard type) HOUSING NATURAL COLOR BLACK BLUE GREEN RED 171822-3 2-171822-3 4-171822-3 6-171822-3 8-171822-3 PRODUCT INSULATION TYPE No. FORM MATERIAL | AWG SIZE DIAMETER 170204-1 BRASS LOOSEN PHOSPHOR 170204-2 BRONZE AWG20~26 1.1~1.9mm 170262-1 BRASS TERMINAL LINKED PHOSPHOR 170262-2 BRONZE 170205-1 BRASS LOOSEN 170205-2 boom AWG26~30 1.0~1.4mm 170263-1 BRASS LINKED PHOSPHOR 170263-2 BRONZE AMP (Japan), Ltd. made EI series connector (Low profile type) HOUSING NATURAL COLOR BLACK BLUE GREEN RED 172142-3 2-172142-3 4-172142-3 6-172142-3 8-172142-3 PRODUCT INSULATION TYPE No. FORM MATERIAL | AWG SIZE DIAMETER 170369-1 LOOSEN TERMINAL AWG22~26 1.1~1.9mm 170354-1 LINKED PHOSPHOR 170370-1 LOOSEN | BRONZE AWG26~30 1.0~1.5mm 170355-1 LINKED 1997-12-10 6/8TOSHIBA TLP1201A (C1) TLP1201A,TLP1201A(C1),TLP1201A(C2) Molex Japan Co., Ltd. made connector (Low profile type) HOUSING 5264-03 PRODUCT INSULATION TYPE No. FORM MATERIAL | AWG SIZE DIAMETER TERMINAL 5263PBTL LOOSEN PHOSPHOR AWG22~28 19 MAX 5263PBT LINKED | BRONZE mn TLP1201A (C2) Japan solderless terminal MFG. made NH connector HOUSING H3P-SHF-AA PRODUCT INSULATION TYPE No. FORM MATERIAL | AWG SIZE DIAMETER SHF-001T-0.88S BRASS SHF-001T-0.8BS LOOSEN BRONZE SHF-002T-0.88S BRASS SHF-002T-0.8BS PHOSPHOR | AWG28~30 1.0~1.2mm BRONZE For details of the connectors, please refer to the connector maker. 1997-12-10 7/8TOSHIBA TLP1201A,TLP1201A(C1),TLP1201A(C2) IoL Ta VoL Io. (TYP.) 0. 0.1 0.01 ALLOWABLE LOW LEVEL OUTPUT VOLTAGE VoL ) LOW LEVEL OUTPUT VOLTAGE Voz (V) 20 0 20 40 60 80 100 1 3.5 10 30 50 100 AMBIENT TEMPERATURE Ta (C) LOW LEVEL OUTPUT CURRENT Ip, (mA) DETECTING POSITION DETECTING POSITION CHARACTERISTICS (1) (TYP.) CHARACTERISTICS (2) (TYP.) _ Voc =5V l l I noe Ton RL= 10kO DETECTING OUTPUT] Ta=25C wy es POSITION H H @=15-1.7mm DETECTING POSITION SHUTTER d=0+0.3mm + OL + ot la OUTPUT SHUTTER | OUTPUT > i -2 -1 0 1 2 14 15 16 17 18 DISTANCE d (mm) DISTANCE d (mm) 1997-12-10 8/8