ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Description Features The ICS2304NZ-1 is a high-performance, low skew, low jitter PCI/PCI-X clock driver. It is designed to distribute high-speed signals in PCI/PCI-X applications operating at speeds from 0 to 140 MHz. * * * * * * * The ICS2304NZ-1 is characterized for operation from -40C to +85C for automotive and industrial applications. Packaged in 8-pin TSSOP (4.4 mm body) Available in Pb (lead) free package Frequency range of 0 to 140 MHz Less than 200 ps jitter between outputs Distribute one clock input to one bank of four outputs Operating voltage of 3.3 V 10% Available in commercial and industrial temperature ranges Block Diagram OE Logic Control CLK0 CLK1 CLK_IN CLK2 CLK3 1 MDS 2304NZ-1 B I n t e gra te d C i r c u i t S y s t e m s 525 Race Stre et, San Jo se, CA 9 5126 Revision 011205 te l (40 8) 2 97-12 01 w w w. i c st . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Pin Assignment Functionality Table Inputs CLK_I N 1 8 CLK3 OE 2 7 CLK2 CLK0 3 6 VDD GND 4 5 CLK1 Outputs CLK_IN OE CLK(3:0) 0 0 Tristate 0 1 0 1 0 Tristate 1 1 1 Pin Descriptions Pin Number Pin Name Pin Type 1 CLK_IN Input Input reference frequency. 2 OE Input Output Enable. When OE is low, it tri-states clock outputs. 3 CLK0 Output Buffered clock output. 4 GND Power Connect to ground. 5 CLK1 Output Buffered clock output. 6 VDD Power Power supply for 3.3 V. 7 CLK2 Output Buffered clock output. 8 CLK3 Output Buffered clock output. 2 MDS 2304NZ-1 B In te grated Circuit Systems Pin Description 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the ICS2304NZ-1. These ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Rating Supply Voltage Range, VDD -0.5 V to 4.3 V Input Voltage Range, VI (see notes 1 and 2) -0.5 V to VDD + 0.5 V Output Voltage Range, VO (see notes 1 and 2) -0.5 V to VDD + 0.5 V Input Clamp Current, IIK (VI<0 or VI>VDD) 50 mA Output Clamp Current, IIK (VO<0 or VO) 50 mA Continuous Total Output Current, IO (VO = 0 to VDD) 50 mA Package Thermal Impedance, JA (see note 3): PW Package 230.5C/W Storage Temperature Range, Tstg -65C to 150C Notes: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 4.6 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51. Recommended Operation Conditions Parameter Supply Voltage, VDD High-level Input Voltage, VIH Min. Typ. Max. Units 3 3.3 3.6 V 0.7 x VDD V 0.3 x VDD V VDD V High-level Output Current, IOH -24 mA Low-level Output Current, IOL 24 mA +85 C Low-level Input Voltage, VIL Input Voltage, VI 0 Operating Free-air Temperature, TA -40 - Timing Requirements Over Recommended Ranges of Supply Voltage and Operating Free-air Temperature Min. Clock Frequency, fCLK 0 Max. Units 140 MHz 3 MDS 2304NZ-1 B In te grated Circuit Systems Typ. 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Electrical Characteristics at 3.3 V over Recommended Free-air Temperature Range VDD = 3.3 V 10%, TA = -40C to 70C (unless stated otherwise) Parameter Input Voltage High-level Output Voltage Low-level Output Voltage Symbol Conditions VIK VDD at 3.3 V, II = -18 mA VOH VOL High-level Input Current IOH Low-level Input Current IOL Input Current II Min. VDD = min to max, IOH = -1 mA Typ. VDD-0.2 3.3 VDD = 3 V, IOH = -24 mA 2 2.3 VDD = 3 V, IOH = 12 mA 2.4 2.7 Max. Units -1.2 V V VDD = min to max, IOH = 1 mA 0.222 0.2 VDD = 3 V, IOH = 24 mA 0.61 0.8 VDD = 3 V, IOH = 12 mA 0.31 0.55 VDD = 3 V, VO = 1 V -53 -40 VDD = 3.3 V, VO = 1.65 V -54 VDD = 3 V, VO = 2 V 40 VDD = 3.3 V, VO = 1.65 V V = VDD or VO 53 V mA mA 57 -5 5 mA 37 mA Dynamic Supply Current IDD Uploaded outputs at 66.67 MHz 13 Input Capacitance (Note 1) CI VDD = 3.3 V, VI = 0V or 3.3 V 3 pF Output Capacitance (Note 1) CO VDD = 3.3 V, VI = 0V or 3.3 V 3.2 pF Note 1: Guaranteed by design, not 100% tested in production. 4 MDS 2304NZ-1 B In te grated Circuit Systems 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Switching Characteristics at 3.3 V over Recommended Ranges of Supply Voltage and Operating Free-air Temperature VDD = 3.3 V 10%, TA = -40C to 85C (unless stated otherwise) Parameter Symbol Conditions Min. Typ. Max. Units High-to-Low Propagation Delay (Note 1) tPLH VO = VDD/2 1.8 3.1 3.8 ns Low-to-High Propagation Delay (Note 1) tPHL VO = VDD/2 1.8 2.9 3.8 ns Output Skew Window (Note 1) TSK(o) VO = VDD/2 50 100 ps Pulse Skew = | tPLH - tPHL | (Note 1) TSK(p) VO = VDD/2 300 ps Process Skew (Note 1) TSK(pr) VO = VDD/2 500 ps CLKIN High Time (Note1) Thigh CLKIN Low Time (Note1) Tlow 66 MHz 6 ns 140 MHz 3 ns 66 MHz 6 ns 140 MHz 3 ns Output Rise Slew Rate (Note 1) Tr 0.3 to 0.6 VDD 1.5 2.1 4 V/ns Output Rise Slew Rate (Note 1) Tf 0.3 to 0.6 VDD 1.5 2.4 4 V/ns Note 1: Guaranteed by design, not 100% tested in production. Parameter Measurement Information Figure 1. Test Load Circuit Figure 2. Voltage Thresholds for Propagation Delay (tpd) Measurements 5 MDS 2304NZ-1 B In te grated Circuit Systems 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Figure 3. Output Skew Figure 4. Clock Waveform Figure 5. Supply Current vs. Frequency 6 MDS 2304NZ-1 B In te grated Circuit Systems 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Figure 6. High-level Output Voltage vs. High-level Output Current Figure 7. Low-level Output Voltage vs. Low-level Output Current 7 MDS 2304NZ-1 B In te grated Circuit Systems 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m ICS2304NZ-1 P R E L I M I N A R Y I N F O R M AT I O N LOW SKEW PCI/PCI-X BUFFER Package Outline and Package Dimensions (8-pin TSSOP, 4.40 mm Body, 0.65 mm Pitch) Package dimensions are kept current with JEDEC Publication No. 95, MO-153 8 Millimeters Symbol E1 INDEX AREA E 1 2 D A A2 Min A A1 A2 b C D E E1 e L aaa Inches Max Min -1.20 0.05 0.15 0.80 1.05 0.19 0.30 0.09 0.20 2.90 3.10 6.40 BASIC 4.30 4.50 0.65 Basic 0.45 0.75 0 8 -0.10 Max -0.047 0.002 0.006 0.032 0.041 0.007 0.012 0.0035 0.008 0.114 0.122 0.252 BASIC 0.169 0.177 0.0256 Basic 0.018 0.030 0 8 -0.004 A1 c - Ce SEATING PLANE b L aaa C Ordering Information Part / Order Number Marking Shipping Packaging Package Temperature ICS2304NZG-1 ICS2304NZG-1T ICS2304NZG-1LF ICS2304NZG-1LFT ICS2304NZGI-1 ICS2304NZGI-1T ICS2304NZGI-1LF ICS2304NZGI-1LFT 304N1 304N1 04N1L 04N1L 04NI1 04NI1 4NI1L 4NI1L Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 0 to +70 C 0 to +70 C 0 to +70 C 0 to +70 C -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C "LF" denotes Pb (lead) free package. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems (ICS) assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. 8 MDS 2304NZ-1 B In te grated Circuit Systems 525 Ra ce Street, San Jose, CA 9512 6 Revision 011205 tel (4 08) 297-1 201 w w w. i c s t . c o m