https://www.phoenixcontact.com/us/products/2817424 Combination type 1/2 protective device-FLT 35 CTRL-0.9/I-2817424 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Type 1/Class I/B arrester (lightning current arrester) with encapsulated arc chopping spark gap and ignition electronics with control lamp, single-channel. Housing width: 17.5 mm (1 div.) Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 189.400 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 88.6 mm Width 17.6 mm Depth 66.2 mm Horizontal pitch 1 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 C ... 85 C Permissible humidity (operation) 95 % General Housing material PA Flammability rating according to UL 94 V0 Color black Mounting type DIN rail: 35 mm 10/14/2020Page1/6 https://www.phoenixcontact.com/us/products/2817424 Combination type 1/2 protective device-FLT 35 CTRL-0.9/I-2817424 Technical data General Type DIN rail module, one-piece Surge protection fault message optical Direction of action 1L-N/PE Protective circuit IEC test classification I T1 EN type T1 Maximum continuous operating voltage UC 260 VAC Maximum continuous operating voltage UC (L-N) 260 VAC Maximum continuous operating voltage UC (L-PEN) 260 VAC Nominal frequency fN 50 Hz 60 Hz Residual current IPE 2.5 mA Operating effective current IC at UN 2.5 mA Impulse discharge current (10/350)s, charge 17.5 As Impulse discharge current (10/350)s, specific energy 305 kJ/ Impulse discharge current (10/350)s, peak value limp 35 kA Nominal discharge current In (8/20) s 35 kA Nominal discharge current In (8/20) s (L-N) 35 kA Nominal discharge current In (8/20) s (L-PEN) 35 kA 100 % lightning impulse sparkover voltage (1.2/50) s 0.9 kV Voltage protection level Up 0.9 kV Voltage protection level Up (L-N) 0.9 kV Voltage protection level Up (L-PEN) 0.9 kV Response time tA 100 ns Response time tA (L-N) 100 ns Response time tA (L-PE) 100 ns Max. backup fuse with branch wiring 125 A (gL) Short-circuit withstand capability IP with max. backup fuse (r.m.s.) 25 kA Follow current interrupt rating Ifi (L-N) 3 kA Follow current quenching capacity Ifi (L-PEN) 3 kA Connection, protective circuit Connection method Screw connection Connection technology Biconnect terminal block Screw thread M5 10/14/2020Page2/6 https://www.phoenixcontact.com/us/products/2817424 Combination type 1/2 protective device-FLT 35 CTRL-0.9/I-2817424 Technical data Connection, protective circuit Tightening torque 4.5 Nm Stripping length 14.5 mm Conductor cross section flexible min. 0.5 mm Conductor cross section flexible max. 25 mm Conductor cross section solid min. 0.5 mm Conductor cross section solid max. 35 mm Conductor cross section AWG min. 20 Conductor cross section AWG max. 2 Standards and Regulations Standards/regulations IEC 61643-1 1998 E DIN VDE 0675-6 1989 E DIN VDE 0675-6/A1 1996 E DIN VDE 0675-6/A2 1996 IEC 61312-1 1995 Environmental Product Compliance REACh SVHC Lead 7439-92-1 Drawings Dimensional drawing 10/14/2020Page3/6 https://www.phoenixcontact.com/us/products/2817424 Combination type 1/2 protective device-FLT 35 CTRL-0.9/I-2817424 Circuit diagram Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27140201 eCl@ss 5.0 27140201 eCl@ss 5.1 27140201 eCl@ss 6.0 27140201 eCl@ss 7.0 27140201 eCl@ss 8.0 27130802 eCl@ss 9.0 27130802 ETIM ETIM 2.0 EC000381 ETIM 3.0 EC000381 ETIM 4.0 EC000381 ETIM 5.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 10/14/2020Page4/6 https://www.phoenixcontact.com/us/products/2817424 Combination type 1/2 protective device-FLT 35 CTRL-0.9/I-2817424 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC RU CDE.*09.B.00169 Accessories Accessories Device marking Zack marker strip-ZBN 18:UNBEDRUCKT-2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 End block End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray Labeled device marker 10/14/2020Page5/6 https://www.phoenixcontact.com/us/products/2817424 Combination type 1/2 protective device-FLT 35 CTRL-0.9/I-2817424 Accessories Marker for terminal blocks-ZBN 18,LGS:ERDE-2749589 Marker for terminal blocks, Strip, white, labeled, horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker for terminal blocks-ZBN 18,LGS:L1-N,ERDE-2749576 Marker for terminal blocks, Strip, white, labeled, horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker pen Marker pen-B-STIFT-1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 10/14/2020Page6/6