B273
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
FX15 Series
Contacts consolidated into 1 row for equal length transmission lines
Mating side: 1 mm pitch, staggered 2-row construction
Termination side: 0.5 mm pitch, 1-row construction
■Features
1. Space saving
Reduction in space is achieved by designing the
contacts in 2-row staggered 1 mm pitch on the mating
side and on a single row 0.5 mm pitch on the termination
side (Fig. 1).
2. Equal length transmission lines
Contact configuration creates equal length transmission
lines preventing deterioration of LVDS signal within the
connector (Fig.1).
3.
Different types
Availability of types with or without metal shields allows
flexibility of applications and cost reduction.
4. Self alignment and self-guiding
Built-in guide posts allow secure self-alignment within
±1.5 mm (Fig.2).
5. Secure and complete mating / unmating
Side latch-locks assure and confirm complete and
secure mating of plugs to receptacles while permitting
ease of disconnection (Fig. 3).
6. Enhanced shielding effectiveness
Availability of version with enlarged metal shields
(preventing intrusion or emission of the electromagnetic
interference) further protects the integrity of LVDS signal
(FX15S series, Fig.4)
7. RoHS compliant
All components and materials comply with the
reqirements of EU Directive 2002/95/EC.
■Applications
FPD-TV, FPD panels and other applications requiring
secure and reliable connection and transmission signal
integrity.
Space saving, Equal length transmission lines
Patent
pending
0
0.1 0.2 0.3 0.5 1 2 31.5
-10
-20
-30
-40
-50
Frequency (GHz)
With metal
Without metal
Emission Noise Level (dBm)
High Shielding Effectiveness
Fig.1
Self-alignment of ±1.5 mm
Side latch -locks
Large guide post
1.5mm1.5mm
1.5mm
With metal shields
(FX15 and FX15S Series)
Without metal shields
(FX15M Series)
Fig.2
Fig.3
Fig.4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B274
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
1 mA
100V DC
300V AC/one minute
With corresponding connector
50 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.76mm, 2 hours, 3 axis
Acceleration of 490m/s2, 11ms durations, sine half-wave waveform, 3 cycles, 3axis.
96 hours at 40ç, RH 90% to 95%
Temperature : -55ç → +15ç to +35ç →+85ç →+15ç to +35ç
Time : 30 →5 →30 →5 (Minutes) 5 cycles
5% water solution for 48 hours.
60 m ohms max. (Note 3)
500 M ohms min.
No flashover or insulation breakdown.
0.2N min., 30N max.
Contact resistance: 80 m ohms max.(Note 3)
No electrical discontinuity of 1 µs or more.
No electrical discontinuity of 1 µs or more.
Contact resistance: 80 m ohms max.
No damage, cracks, or parts dislocation.
(Note 3)
Contact resistance: 80 m ohms max. (Note 3)
Insulation resistance: 500 M ohms min.
Contact resistance: 80 m ohms max. (Note 3)
No corrosions
■Ordering information
■Product Specifications
Ratings Current rating
Voltage rating
0.5A
100V AC
Operating temperature range
Storage temperature range
-55ç to +80ç (Note 1)
-10ç to +60ç (Note 2)
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
4. Insertion-Extraction force
5. Durability
(mating/un-mating)
6. Vibration
7. Shock
8. Humidity
9. Temperature cycle
10. Salt spray
Item Specification Conditions
Note 1: Includes temperature rise caused by current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range
and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Includes wire conductor resistance (12mm long).
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials and Finishes
●Receptacle
UL94V-0
---------------
---------------
---------------
Material Finish RemarksComponent
Insulator
Contact
Metal shields (with shields)
Metal fittings (without shields)
Polyamide
Phosphor bronze
FX15S : Nickel silver
FX15SC : Stainless steel
Phosphor bronze
Color: Black
Contact area: Gold plated
Termination area: Tin plated
FX15S : ---------------
FX15SC : Tin plated
Selective gold flash plated
UL94V-0
---------------
---------------
---------------
---------------
Material Finish RemarksComponent
Insulator
Contact
Metal shields (with shields)
Metal latch-locks (with shields)
Metal shields, metal latch-looks
(micro-coaxial cable)
Polyamide
Phosphor bronze
Nickel silver
Stainless steel
Stainless steel
Color: Black
Contact area: Gold plated
Termination area: Tin plated
---------------
---------------
Nickel plated
●Plug
FX15 S -31 S - 0.5 SH
1 632 4 5
●Receptacle
FX15 S - 31 P - C
1 32 4 7
●Plug
FX15 - 3032 PCF B
1298
10
●Crimp contact
1
2
3
4
5
6
7
8
9
10
Series Name
Configuration
Number of contacts
Connector type
Contact pitch
Housing configuration
Termination
Applicable conductor
Packaging
Plating (contact area)
: FX15
Blank : With shields (or crimp contact)
15S : With shields – enhanced shielding
15SC : With shields – enhanced shielding
(PCB mounting pattern : VESA standard)
15M : Without shields
P : Male contact
S : Female contact
: 0.5 mm
SH : Right angle
SV : Straight
C : Crimp
0.5SD : Micro-coaxial cable
GND : Separate ground plate
2830 : AWG 28 to 30
3032 : AWG 30 to 32
PCF : Reel/ plug contact
B : Gold plated
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B275
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■FX15 Series – Mating Diagram
Crimp contact
Crimp contact
(FX15-3032-PCFB)
Crimp contact
(FX15-2830-PCFB)
Plugs Receptacles
B
B
B
Without shields
(FX15M-P-C)
Right angle, with shields
–enhanced shielding
(FX15S-S-0.5SH)
With shields – enhanced shielding
(FX15S-P-C)
Right angle, without shields
(F
X15M-S-0.5SH)
With shields – enhanced shielding
PCB mouting pattern : VESA standard
(F
X15SC-S-0.5SH)
With shields – enhanced shielding
PCB mouting pattern : VESA standard
(F
X15SC-S-0.5SV)
28
With shields – enhanced shielding
AWG#28 to 30
(F
X15SW-31P-C)
A
Micro-coaxial cable
(FX15S-P-0.5SD)
With shields-standard
(FX15-31P-C)
Vertical, with shields
(FX15-31S-0.5SV)
Ground plate
(FX15S-P-GND)
Ragarding the availability of the positions, contact your nearest Hirose representative.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
■Plugs
B276
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
No.2
No.1
No.30
No.31
Polarizing mark
indicator
22.57±0.15
(27)
9.4±0.3
18.3±0.3
(13.45)
P=1±0.1
14±0.15
P=1±0.1
15±0.15
24.6±0.3
2.7±0.1
3.7±0.3
Part number
FX15S-31P-C
FX15S-41P-C
FX15S-51P-C
CL575-2106-6
CL575-2107-9
CL575-2103-8
31
41
51
27
32
37
24.6
29.6
34.6
22.6
27.6
32.6
18.3
23.3
28.3
14
19
24
15
20
25
YES
CL No. Number of contacts ARoHS
YES
RoHS
FEDCB
●With shields (FX15-31P-C)
3.7±0.3
4±0.3
B±0.3
(A)
9.4±0.3
D±0.3
C±0.15
(13.45)
2.7±0.1
E±0.15
P=1±0.1
P=1±0.1
F±0.15
No.1
No.2
No.n
No.n-1
Polarizing mark
indicator
●With shields, enhanced shielding (FX15S-**P-C)
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
Part number
FX15-31P-C CL575-2101-2 31
CL No. Number of contacts
YES
RoHSPart number
FX15-31P-C CL575-2101-2 31
CL No. Number of contacts
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B277
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
YES
RoHSPart number
FX15SW-31P-C CL575-2113-1 31
CL No. Number of contacts
C±0.3
F±0.15
P=1±0.1
P=1±0.1
E±0.15
No.1
No.n-1
No.2
No.n
B±0.3
9.55±0.3
(A)
(D)
(13)
(13.6)
4.2±0.3
Polarizing mark
indicator
●Without shields (FX15M-**P-C)
Part number
FX15M-21P-C
FX15M-31P-C
CL575-2109-4
CL575-2108-1
21
31
24.8
29.8
CL No. Number of contacts A B
17.6
22.6
C
13.7
18.7
D
25.8
30.8
E
9
14
F
10
15
G
YES
RoHS
20.5
25.5
Note 1: Sold in package containing 100 pieces. Order by package.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
4±0.3
24.6±0.3
(27)
9.4±0.3
18.3±0.3 3.7±0.3
22.57±0.15
(13.45)
2.7±0.1
14±0.15
P=1±0.1
P=1±0.1
15±0.15No.1
No.2 No.30
No.31
B
28
A
Polarizing mark
indicator
●With shields – enhanced shielding
AWG#28 to 30 (FX15SW-31P-C)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B278
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
FX15-2830PCFB
■Plug crimp contacts
CL No.Part number Packaging Quantity Finish RoHS
CL575-2002-0
CL575-2003-3
FX15-2830PCFB
FX15-3032PCFB Reel 20,000 pieces per reel Gold plated YES
Applicable wire size
(Stranded wire conductor) Jacket diameter UL No.
AWG #28 (7/0.127 mm)
AWG #30 (7/0.1 mm) Ø0.56 to 0.72mm 1517
1571
Applicable crimp contact
FX15-2830PCFB
FX15-3032PCFB
–––––––––
0.5±0.15 0.9±0.15
0.72±0.1
(7)
2±0.15
0.35±0.1
t=0.15±0.05
Note: When using other than the recommended wire, contact
your nearest Hirose representative.
Note: Consult HRS representative when using applicator.
●Applicable cable (Tin plated solid soft strands)
●Wire strip length: 1.1 to 1.8 mm
FX15-3032PCFB
Applicable wire size
(Stranded wire conductor) Jacket diameter UL No.
AWG #30 (7/0.1 mm)
AWG #32 (7/0.08 mm) Ø0.5 to 0.6mm 1516, 1571(Note)
1571
Product number Item CL No.
AP105-FX15-2830
AP105-FX15-3032
CM-105
Applicator
Press unit
901-4036-0
901-4033-1
901-0005-4
●Tools
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B279
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
A
C±0.15
D±0.15
P=0.5±0.1
2.7±0.15
No.1 No.n
No.1
No.2
No.n
No.n-1
3.5±0.3
(A)
B±0.3
8.75±0.3
(13)
Polarizing mark
indicator
●Plug – Micro-coaxial cable (FX15SC-**P-0.5SD)
31.9
36.9
29.6
34.6
27.57
32.57
20
25 YES
A B C D RoHSPart number
FX15S-41P-0.5SD
FX15S-51P-0.5SD
CL575-2110-3
CL575-2118-5
41
51
CL No. Number of contacts
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
A±0.2
11.45±0.3
B±0.2 2.2±0.2
1.55±0.2
●Ground plate for micro-coaxial cable
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
29.2
34.2
30.06
35.06 YES
A B RoHSPart number
FX15S-41P-GND
FX15S-51P-GND
CL575-2111-6
CL575-2117-2
41
51
CL No. Number of contacts
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B280
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
B±0.15
P=0.5±0.07
0.9 MAX
2.1 0
-0.1
Inner conductor
Insulator
Outer conductor
0.6±0.1
AWG#36 to 40 Micro-coaxial cable
1+0.05
-0.2
A±0.2
Gronding bar
1 MIN
Solder coat
Jacket
Number of contacts A
41
51
23.1
28.1
B
20
25
Wire size
(Standed wire inner conductor) Jacket diameter
AWG #36 (7/0.05 mm)
AWG #38 (7/0.04 mm)
AWG #40 (7/0.03 mm)
0.3mm to 0.5mm
●Applicable cable (Micro-coaxial cable)
●Cable preparation
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B281
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
No.1
No.2
No.31
No.30
ab
cd
ef
P=0.5±0.1
15±0.15
19.82±0.2
25.7±0.3
4±0.3
5.6±0.3
(6)
(0.8)
0.9±0.2
22.8±0.3
4.8±0.3
1.5±0.2 1±0.2 1±0.2 1.5±0.2 0.8±0.1
■Receptacles
●Vertical, with shields (FX15-31S-0.5SV)
2
1.5 0
-0.05
3.2+0.05
0
2-Ø1(TH)
2-Ø1.4(LND) 0.9 0
-0.1
4.1+0.1
0
17.72 0
-0.1
21.92 +0.1
0
2.2 0
-0.1
6.7+0.1
0
22.8±0.05
15±0.05
P=0.5±0.03
0.3±0.03(Land)
0.25±0.03(Metal mask)
0.2+0.1
0
Note 1 :The co-planarity of the terminal leads is as follows:
• All signals and shield leads “c” and “d”: 0.1mm max.
• Shield leads “a”, “b”, “e” and “f”: 0.15 mm max.
2 :
Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
4 : Dimensions in parenthesis ( ) are reference dimensions.
BRecommended PCB mounting pattern and metal mask dimensions
YES
RoHSPart number
FX15-31S-0.5SV CL575-2201-7 31
CL No. Number of contacts
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B282
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
4.45±0.1
(3)
(0.2) (1.7)
0.5±0.1
A±0.2
P=1±0.1
P=1±0.1
C±0.15
D±0.15
B±0.2
E±0.3
0.2±0.05
No.1
No.2 No.n
No.n-1
(2.6)
(4)
Polarizing mark
indicator
4.4±0.3
4
5
4
●Right angle with shields – enhanced shielding (FX15S-**S-0.5SH)
2
2
2
3
3
L 0
-0.05
4.25
4.15
K±0.05
0.5±0.03
0.25±0.03(Metal mask)
J 0
-0.05
H+0.05
0
G 0
-0.05
F+0.05
0
3.55 +0.05
0
2.05 0
-0.05
M+0.05
0
N23.2 0
-0.05
P26.8+0.05
0
3.7+0.05
0
1.45 0
-0.05
2.2+0.05
0
1.7 0
-0.05
3.7+0.05
0
R
13.85
S
0.3±0.03(Land)
Note 1 : The coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 :
Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : The area marked indicates vacuum pick-and-place area for board placement with automatic equipment.
5 : Vacuum pick-up area
6 : Packaged on tape-and-reel, 1000 pieces per reel.
7 : Dimensions in parenthesis ( ) are reference dimensions.
BRecommended PCB mounting pattern and metal mask dimensions
Part number
FX15S-31S-0.5SH
FX15S-41S-0.5SH
FX15S-51S-0.5SH
CL575-2306-5
CL575-2307-8
CL575-2303-7
31
41
51
15
20
25
HRS No.
Number of contacts
A B
14
19
24
C
15
20
25
D
27.8
32.8
37.8
E
28.8
33.8
38.8
F
24.8
29.8
34.8
G
21.6
26.6
31.6
H
27.4
32.4
37.4
18
23
28
J K
------
5.2
5.2
L
------
8.8
8.8
M
13.2
18.2
23.2
N
16.8
21.8
26.8
P
24.8
29.8
34.8
R
40
45
50
YES
SRoHS
15
20
25
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B283
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
4.3±0.3
4.8±0.3
(5.5)
Vacuum pick and place area
Polarizing mark
indicator
No.1
No.2
No.n
No.n-1
6.55±0.3
B±0.2
D±0.15
P=1±0.1
P=1±0.1
C±0.15
A±0.2
0.5±0.1
0.2±0.05
6.15±0.3
●Right angle, without shields (FX15M-**S-0.5SH)
E±0.05
0.3±0.03(Land)
0.9±0.03
3.7 0
-0.05
7.4+0.05
0
(1.85)
0.25±0.03(Metal mask)
4
G
14 2
F±0.05
P=0.5±0.03
1.9 0
-0.05
3.4+0.05
0
2
2
Part number
FX15M-21S-0.5SH
FX15M-31S-0.5SH
CL575-2309-3
CL575-2308-0
21
31
10
15
HRS No. Number of contacts A B
9
14
C
10
15
D
17.9
22.9
E
10
15
F
35
40
G
YES
RoHS
22.4
27.4
Note 1 : The co-planarity of all terminal leads is 0.1 mm max.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and
latch lock operation.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
B
Recommended PCB mounting pattern and metal mask dimensions
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B284
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
0.18±0.05
1.5±0.1
3.1±0.2
4.45±0.2
0.5±0.1
F±0.3
1.5±0.1
(0.25 ) (1.1)
P=1±0.1
G±0.15
H±0.15
P=1±0.1
No.1 No.n
4.4±0.3
P=0.5±0.1
C±0.2
B±0.2
E±0.2
P=D±0.1
A±0.3
Polarizing mark
indicator
●Right angle with shields – enhanced shielding (FX15SC-**S-0.5SH)
PCB mounting pattern : VESA standard
1.55±0.05
K
5.6
3.5±0.05
12
5.1±0.05
J±0.05
2.05±0.05
2.5±0.05
C±0.05
P=0.5±0.03 n-0.25±0.03
B±0.05
2.5±0.05
1.55±0.05
E±0.05
P=D±0.05
6-1.3±0.05
No.1 No.n
2
22
3
Part number
FX15SC-41S-0.5SH
FX15SC-51S-0.5SH
CL575-2310-2
CL575-2311-5
41
51
32.85
37.85
HRS No.
Number of contacts
A
YES
RoHS
B
Recommended PCB mounting pattern and metal mask dimensions
26
31
B
20
25
C
4
5
D
20
25
E
32.4
37.4
F
19
24
G
20
25
H
29.75
34.75
J
45
50
K
Note 1 : The coplanarity of the terminal leads is 0.1 mm max.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 :
Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : Packaged on tape-and-reel, 1000 pieces per reel.
5 : Dimensions in parenthesis ( ) are reference dimensions.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B285
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
E±0.3
A±0.2
D±0.2
P=C±0.1
0.5±0.1
P=0.5±0.1
1.5±0.1
0.18±0.05
No.n
B±0.2
No.1
5.3±0.3
4.2±0.2
5.5±0.3
●Vertical with shields – enhanced shielding (FX15SC-**S-0.5SV)
PCB mounting pattern : VESA standard
2
B±0.05
A±0.05
D±0.05
A±0.05
P=C±0.05
P=0.5±0.3 n-0.25±0.03 2.5±0.05
3.5±0.051.55±0.05 1.55±0.05
2.5±0.056-1.3±0.05
No.1 No.n
B
Recommended PCB mounting pattern and metal mask dimensions
26
31
20
25
4
5
20
25
32.4
37.4 YES
A B C D E RoHSPart number
FX15SC-41S-0.5SV
FX15SC-51S-0.5SV
CL575-2205-8
CL575-2204-5
41
51
CL No. Number of contacts
Note 1 : The coplanarity of the terminal leads is 0.1 mm max.
2 :
Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B286
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Packaging Specifications
●Vertical, with shields
(FX15-31SC-0.5SV)
●Right angle, with shields-enhanced shielding
(FX15S-**S-0.5SH)
●Right angle, without shields
(FX15M-**S-0.5SH)
●Reel dimensions
Ø13±0.5
(1.6)
(Ø380)
(Ø80)
(D)
Part number
FX15S-31S-0.5SH
FX15S-41S-0.5SH
FX15S-51S-0.5SH
CL575-2306-5
CL575-2307-8
CL575-2303-7
31
41
51
20.3
26.3
26.3
HRS No. Number of contacts A
40.5
52.5
52.5
B
44
56
56
C
44.5
56.5
56.5
D
Part number
FX15M-21S-0.5SH
FX15M-31S-0.5SH
CL575-2309-3
CL575-2308-0
21
31
20.2
20.2
HRS No. Number of contacts A
40.4
40.4
B
44
44
C
44.5
44.5
D
Part number
FX15-31S-0.5SV CL575-2201-7 31
HRS No. Number of contacts
44.5
D
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B287
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
●Right angle with shields – enhanced shielding
(FX15SC-**S-0.5SH)
●Vertical with shields – enhanced shielding
(FX15SC-**S-0.5SV)
●Reel dimensions
Ø13±0.5
(1.6)
(Ø380)
(Ø80)
(E)
Part number
FX15SC-41S-0.5SV
FX15SC-51S-0.5SV
CL575-2205-8
CL575-2204-5
41
51
26.2
26.2
HRS No. Number of contacts A
52.4
52.4
B
56
56
C
56.5
56.5 YES
D
RoHS
Part number
FX15SC-41S-0.5SH
FX15SC-51S-0.5SH
CL575-2310-2
CL575-2311-5
41
51
26.2
26.2
HRS No. Number of contacts A
52.4
52.4
B
56
56
C
56.5
56.5 YES
D
RoHS
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B288
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
250
150ç
180ç
30±10sec.
90±30sec.
230ç
MAX 250ç
Time (sec.)
Sodering
(230çmin)
Preheating(150 to 180ç)
230
180
25
150
0
100
Temperature (ç)
BRecommended temperature profile
HRS test conditions
Test boardGlass epoxy 40mm∞30mm∞1mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.12mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
Note: The temperature profile indicates the maximum temperature
of the connector surfaces at the highest point from the PCB
mounting surface.
BCleaning recommendations
Water based cleaning
When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation
issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove any
moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance.
Organic solvent cleaning
Solvent type Room temperature cleaning Heated cleaning
IPA (Isoporopyl alcohol)
HCFC (Hydrochlorofluorocarbon)
YES
YES
YES
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B289
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
Retention tab
Crimp side
Molded-in lance
Molded-in lance
Molded-in lance Retention tab facing down
Retention tab facing up
Retention tab
1
2
◆Wire termination
The following documents will be needed in order to perform the cable terminations.
1Basic cable termination and crimp requirements (general explanations).
2Contact crimp termination machine instruction manual (Explanation of the press)
3Applicator parts installation table (Applicator installation explanation)
4Crimp conditions table (Crimp height/Tensile strength standard values)
5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.)
* Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents.
◆Insertion of the crimp contacts in the housing
Crimp contacts are inserted in the housing as illustrated below.
Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing’s contact cavity and
push the contacts in.
Make sure that the contact is fully inserted and the retention tab clears the molded-in lance.
◆Verify that the retention tabs clear the molded-in lances as shown on the illustration below.
Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion.
◆Removal of the contacts
Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts.
Excersize caution as NOT to damage the molded-in lance.
Should the damage occur, the entire housing will need to be replaced.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B290
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Soldering area 1
Soldering area 2
(Ground harness examples)
B B
[Soldering precautions related to FX15S-**P-C connectors ]
◆Grounding Methods of the ground wire or shields for the cable assemblies
1Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the illustrations below.
2Observe the soldering iron tip temperature and soldering time specified.
3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron.
4Do not splatter the flux from the solder core.
Precautions and recommendations
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B291
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
2Minimize the length of outer conductor beyond the ground the bar.
3Length of cutting the extra cable shall be 2.1 mm Max.
Its over length will cause the cable touching the connector body
during assembly and cause defective product.
Minimal length 2.0 mm is a recommended dimension and allowed
to be changed if necessary, as long as ensuring good solderability.
4Pre-solder and coat the inner conductor at the cable end.
2. Recommended solder for the assembly is flux cored solder with 0.2
mm dia. (Lead-free: Sn-3Ag-0.5Cu), 21 mm length.
If you consider using additional flux, please pay enough attention not
to have flux wicking to the contact area.
Flux wicking to the contact area will cause contact failure.
3. Place the cable to the connector and check the below points before
soldering by cable assembly machine.
1Misalinment of cable end to the terminals in pitch direction
2Excessive floating of cable end
4. Follow the recommended temperature profile shown below for the
soldering.
However, the optimum condition could vary depending on various including type of cable and its length, solder type. Therefore refer to the
recommended temperature profile and optimize the condition if necessary.
◆Plug – micro-coaxial cable
[Coutions for soldring ]
1. For the micro coaxial cable assembled to this connector, cable alignment process as shown in "Recommended cable" on the page 1 is required
before assembly.
1Width of ground bar shall be 1.05 mm Max. including misalignment of overlapping, flush by cutting, side drop or soldering.
Using an inadequate cable will interfere the assembly to the connector. Forceful assembly and soldering could cause mis-soldering to defective
product.
Precautions and recommendations
Inner conductor
Outer conductor
Grounding bar
q
w w
e
rSolder coating
qMisalignment in pitch direction wfloating
50ç
250ç
265ç
Pre-heating
Heating
Idling
2s 1s 2s 3-4s
220ç
Duration of pressure application
Solder tip
pressurization
Temperature
Duration
Heating
265±5ç
3~4 sec
13~17N
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B292
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
[Coutions for potting process ]
1. Protect the soldered area by UV cured resin (referred as "potting" hereafter), in order to prevent cable breakage during cabling and other troubles.
2. Apply 3033 manufactured by THREEBOND CO., LTD. or any equivalent product for potting.
Follow the instruction of potting manufacture's for the condition of UV exposure.
3. Refer to the following conditions the potting area.
4. Use extreme care for the handling after solding to the end potting process not to apply stress to the cable, otherwise, cable could be broken.
5. After soldering, check that no defect is found at soldered area.
Examples of correct soldered and defective soldered state are shown below.
Precautions and recommendations
A
A
AA
B
B
BB
Correct soldering
Solder shortage
solder bridge
Floating
A 0
-3
2.15 0
-0.4
1.25 0
-0.75
Enlarged view
A
41
51
23.7
28.7
Number of contacts A
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B293
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
3. Check the six fitting points after assembly and make sure that they are all correctly fitted together.
[Soldering to ground plate ]
1. Solder down the metal bar of the cable and ground plate after the assembly of ground plate in order to enhance the grounding performance and
robustness against cable stroke to up and down direction.
[Coutions for ground plate assembly ]
1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process.
2. Place the ground plate onto the connector horizontally and pinch two components from top and bottom with fingers.
Precautions and recommendations
Pinch from top and bottom with fingers
A
Ground plate
(FX15S-41P-GND)
qAssembly wHorizontally
from the top
ePinch with fingers
A
Fitting
Fitting
Fitting
Fitting
Fitting
Fitting
AGround plate does not hook the
protrusion of connector housing
Ground plate hooks the
protrusion of connector housing
How to check fitting points
OK NG
(Cut section of fitting points)
Soldering Soldering
A
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B294
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
Connectors
Packaging
Triangle mark
Mating
Mating
Arrow mark
Triangle mark
Center mark Center mark
◆Packaging of the complete cable assemblies
Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be taken NOT to apply any
excessive pull forces to the individual wires.
When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not interfering with packaging.
◆Mating of the connectors
The connectors have built-in polarizing feature and will NOT mate when reversed. Do NOT try forced mating.
Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-locks are fully engaged.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B295
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
B
B
B
2Pull straight apart
1
Press
1
Press
1
Press
1
Press
B
B
Lock latches
◆Handling of Connectors after Mating
Do not to apply excessive forces to the connectors when routing the cable after mating.
Pulling on the entire cable with a force of 20 N or greater can damage the connector. Please take due care not to pull the cable.
◆Un-mating of the connectors
Depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the cables!
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B296
FX15 Series●1mm Pitch Cable-to-Board Connectors supporting LVDS signal
BTechnical Information (FX15S Series)
●Eye Pattern Waveforms (700 MHz)
●Shielding Effectiveness (Shielding Characteristics Comparison Using a 2-chamber Shielded Room)
Notes:The measurement value of "Without plug-side shields + Without receptacle-side shields” are taken
as the zero level of the graph vertical axis dB.
The respective results express the noise suppression effect (dB) as a relative comparison value
with this "without shields” condition as the reference.
With cable-side shields + With PCB-side shields
With cable-side shields + Without PCB-side shields
Without cable-side shields + With PCB-side shields
Without cable-side shields + Without PCB-side shields
➝ (0 dB line)
60
50
40
30
20
10
0
-10 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2
Frequency (GHz)
Shielding Effect (dB)
Measured shielding effectiveness for frequencies from 100 MHz to 2 GHz.
Shielded connectors show noise suppression of 10 db to 20 dB, when compared with connectors without the shields.
1 m Cable Length 1.5 m Cable Length
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.