Micro-D Metal Shell - .050" Contact Spacing MDM connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than available in traditional rectangular connectors. They are available in 8 shell sizes accommodating from 9 to 100 contacts, and special arrangements of power and coaxial contacts. These connectors are designed to meet the rapidly increasing demands for an environmental, high performance, rugged, moisture-sealed microminiature connector. This connector MDM employs size 24 MICROPINTM/MICROSOCKETTM contacts on .050 (1.27) centers in a contact density identical to the standard MICRO-D connector series, but with these additional features: * Aluminum shells to provide greater strength, prevent chipping, cracking or breaking, offer electromagnetic (EMI) and RFI shielding. * Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell. Specifications STANDARD MATERIALS AND FINISHES MECHANICAL FEATURES Shell Coupling - 6061-T6 Aluminum alloy per - Friction/jackscrews QQ-A-200/8, yellow chromate/ Polarization - Keystone-shaped shells cadmium, Type II, Class 3 over Contact Spacing - .050 (1.27) electroless nickel per SAE Centers AMS-C-26074, Class 4. - Plug and receptacle - Liquid Crystal Polymer per MIL-M-24519, Shell Styles Insulator Type GLCP-30F (9-100) No. of Contacts - 9 thru 100 signal; 5 signal/2 coaxial; - Glass filled diallyl phthalate per 5 signal/2 power; MIL-M-14, Type SDGF (7*2 and 24*4) 11 signal/5 coaxial; - Polyphenylene sulfide per 11 signal/5 power; MIL-M-24519, Type GST-40F (16*5) 0 signal/10 coaxial; - Polyester per MIL-M-24519, Type 0 signal/10 power; GPT-30F (10*10) 20 signal/4 coaxial; - Copper alloy, gold plate Contacts 20 signal/4 power Mounting Hardware - 300 Series stainless steel, passivate Kit, Jackpost (3) items - 300 Series stainless steel, passivate - 400 Series stainless stell, passivate Washer Standard Epoxy Coaxial Cable Wire Size - RG - 178/U - #24 thru #32 AWG Contact Termination - Multiple indent crimp - Hysol EE4215/HD3561, color black or Hysol EE4198/HD3561, color green Performance Data The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where applicable. Data is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Test Method Dielectric Withstanding Voltage Method 3001: 600 VAC at sea level 150 VAC at 70,00' altitude Method 3003 Method 1003. Condition A: - 55C to +125C Method 2004, Condition E: 50 G's, 3 axes, 6 millisecond duration sawtooth pulse Method 2005, Condition IV: 20 G's, 10-2,000 Hz. 12 hrs Insulation Resistance Thermal Shock Physical Shock Vibration Durability Moisture Resistance Salt Spray Contact Resistance (MIL-STD-202) Contact Retention Criteria of Acceptance 500 cycles of mating and unmating, 500 CPH max. Method 1002, Type II, omit steps 7a & 7b Method 1001, Condition B: 48 hours Method 1001, Condition B: At 3 amps At 1 milliamp Per MIL-DTL-83513 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 7 No breakdown No breakdown 5,000 megohms minimum No physical damage No physical damage No loss of continuity > 1 sec No physical damage No loss of continuity > 1 sec No mechanical or electrical defects Insulation resistance > 100 megohms Shall be capable of mating and unmating, and meet contact resistance requirements 8 milliohms maximum 10 milliohms maximum 5 lb. minimum axial load Micro-D Metal Shell - .050" Contact Spacing MDM How to Order For MIL-DTL-83513 ordering information see pages 16 and 17 R MDM - 51 P H 001 P - XXX RoHS COMPLIANCE SERIES CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE TERMINATION CODE HARDWARE SHELL FINISH MOD CODES SERIES MDM: (Size 9-100) Liquid Crystal Polymer (LCP) MDM: (Combo Layout) Diallyl Phthalate (DAP) CONTACT ARRANGEMENTS 9-15-21-25-31-37-51-100 (standard) 16C5, 10C10, 7C2, 24C4 (coaxial) or combination of coax and power 16P5, 10P10, 7P2, 24P4 (power) } CONTACT TYPE S - Socket P - Pin TERMINATION TYPE H - Harness-insulated wire. L - Solid-uninsulated wire. S - Solder pot to accept #26 AWG MAX. harness wire. (Not available with power contact arrangements.) HARDWARE M - Military specification hardware, see page 11 for military hardware codes. P - Jackpost K - Jackscrew-standard profile L - Jackscrew-low profile TERMINATION CODE* (H) 001 - 18",7/34 strand,#26 AWG, MIL-W-16878/4, Type E Teflon, yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. SHELL FINISH MOD CODES No Number - (Standard cadmium/yellow chromate over nickel A174 - Electroless nickel A172 - Gold over nickel A141 - Irridite/alodine A30 - Black anodize *See page 79 and 81 for additional Termination codes. F - Float mount B - No hardware standard .091 (2.31) dia. hole for sizes 9-51; .120 (3.05) dia. hole for size 100. A - .125 (3.18) dia. mounting holes for sizes 9-51; .166 (4.22) dia. hole for size 100. B1 - .1475 (3.75) dia. hole for size 100 (Per MIL-DTL-83513) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 8 Micro-D Metal Shell - .050" Contact Spacing MDM COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes Cannon Modification Code (Not MS) The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Solid Uninsulated Type (L) Harness Type (H) #25 AWG gold plated copper #26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded. All Yellow H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) Color Coded* H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 Termination Code L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10 Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) * Cavity #1 black Contact Arrangements (Face View of Pin insert - Use Reverse Order for Socket Side) Standard 1 2 6 3 7 4 8 5 1 9 2 9 14 2 3 4 5 6 7 8 9 4 5 6 7 8 1 10 11 12 13 14 15 2 3 10 11 12 13 15 16 17 18 19 20 21 22 23 24 1 25 17 2 3 4 5 6 7 18 19 20 21 22 23 25 Contacts 8 9 10 3 4 5 6 7 2 3 4 9 10 5 6 20 21 22 23 24 25 26 27 28 29 30 31 7 11 8 9 10 11 12 13 14 15 16 17 18 19 24 25 26 27 28 29 30 31 32 33 34 35 36 37 31 Contacts 8 9 13 14 15 16 17 18 19 20 21 37 Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 2 8 21 Contacts 1 11 12 13 14 15 16 1 1 .043 (1.09) 7 12 15 Contacts 9 Contacts 1 3 .025 (0.64) TYP. .050 (1.27) TYP. 4 5 6 46 47 48 49 50 51 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 100 Contacts 51 Contacts Contact identification numbers are for reference only and do not appear on insulator or connector body. A1 A2 1 2 5 8 3 6 9 4 A3 A4 A5 1 A1 7 10 .714 (18.14) .460 (11.68) .320 (8.13) Coaxial .103 2 4 11 Size 51 Shell 11 Micro contact 5 Coax or 5 Power 3 A1 A2 A2 A6 A3 A4 A7 A8 www.ittcannon.com 9 2 3 4 5 6 7 A3 A4 9 10 11 12 13 Size 51 Shell 20 Micro contacts 4 Coax or 4 Power (Not MS) A5 A9 Size 100 Shell 0 Micro contact 10 Coax or 10 Power Dimensions shown in inch (mm) Specifications and dimensions subject to change 1 14 15 16 17 18 19 20 Size 25 Shell 5 Micro contact 2 Coax or 2 Power A1 A2 8 5 A10 .007 (0.18) Micro-D Metal Shell - .050" Contact Spacing MDM COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to MIL-DTL-83513) Plug .110 (2.79) MAX. B .093 (2.36) REF. F D G .186 (4.72) MAX. .284 (7.21) MAX. TWO MTG. HOLES .091 .003(2.31 0.08) E .200 (5.08) MAX. .416 (10.57) MAX. C A Solder Pot Receptacle .110 (2.79) MAX. .296 (7.52) MAX. TWO MTG. HOLES .091 .003(2.31 0.08) F E D G .200 (5.08) MAX. B .093 (2.36) REF. .429 (10.09) MAX. C A .198 (5.03) MAX. Solder Pot Receptacle (MDM-100 only) TWO MTG. HOLES .120 .003(3.05 0.08) G D .429 (10.90) MAX. .394 (10.01) MAX. .198 (5.03) MAX. B .093 (2.36) REF. E .296 (7.52) MAX. F Pigtail termination C A Part Number By Shell Size MDM-9P* A Max. .785 (19.94) B Max. .334 (8.48) C Max. .400 (10.16) D Max. .270 (6.86) E Max. .308 (7.82) F +_.005 (0.13) .565 (14.35) G Max. .185 (4.70) Average Weights** oz. (gm.) 5% .063 (1.79) MDM-9S* .785 (19.94) .402 (10.21) .400 (10.16) .270 (6.86) .308 (7.82) .565 (14.35) .253 (6.43) .063 (1.79) MDM-15P* .935 (23.75) .484 (12.29) .550 (13.97) .270 (6.86) .308 (7.82) .715 (18.16) .185 (4.70) .084 (2.39) MDM-15S* .935 (23.75) .552 (13.97) .550 (13.97) .270 (6.86) .308 (7.82) .715 (18.16) .253 (6.43) .083 (2.37) MDM-21P* 1.085 (27.56) .634 (16.10) .700 (17.78) .270 (6.86) .308 (7.82) .865 (21.97) .185 (4.70) .105 (2.99) MDM-21P* 1.085 (27.56) .702 (17.83) .700 (17.78) .270 (6.86) .308 (7.82) .865 (21.97) .253 (6.43) .104 (2.97) MDM-25P* 1.185 (30.10) .734 (18.64) .800 (20.32) .270 (6.86) .308 (7.82) .965 (24.51) .185 (4.70) .119 (3.39) MDM-25S* 1.185 (30.10) .802 (20.37) .800 (20.32) .270 (6.86) .308 (7.82) .965 (24.51) .253 (6.43) .118 (3.36) MDM-31P* 1.335 (33.91) .884 (22.45) .950 (24.13) .270 (6.86) .308 (7.82) 1.115 (28.32) .185 (4.70) .140 (3.99) MDM-31S* 1.335 (33.91) .952 (24.18) .950 (24.13) .270 (6.86) .308 (7.82) 1.115 (28.32) .253 (6.43) .139 (3.96) MDM-37P* 1.485 (37.72) 1.034 (26.26) 1.100 (27.94) .270 (6.86) .308 (7.82) 1.265 (32.13) .185 (4.70) .161 (4.59) MDM-37S* 1.485 (37.72) 1.102 (27.99) 1.100 (27.94) .270 (6.86) .308 (7.82) 1.265 (32.13) .253 (6.43) .160 (4.56) MDM-51P* 1.435 (36.45) .984 (24.99) 1.050 (26.67) .310 (7.87) .351 (8.92) 1.215 (30.86) .228 (5.79) .193 (5.50) MDM-51S* 1.435 (36.45) 1.052 (26.72) 1.050 (26.67) .310 (7.87) .351 (8.92) 1.215 (30.86) .296 (7.52) .188 (5.35) MDM-100P* 2.170 (55.12) 1.384 (35.15) 1.442 (36.63) .360 (9.14) .394 (10.01) 1.800 (45.72) .271 (6.88) .500 (14.3) 1.442 (36.63) .360 (9.14) .394 (10.01) 1.800 (45.72) .394 (10.01) ***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails. 1.040 (29.5) MDM-100S* 2.170 (55.12) 1.508 (38.10) *Add lead type and length; see How To Order. Panel Mounting Dimensions (Sizes 9 - 100) .300 .005 (7.62 0.13) .200 .005 (5.08 0.13) .395 .005 (10.03 0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 10 Micro-D Metal Shell - .050" Contact Spacing MDM Panel Cutouts NOTE: See page 13 for rear panel mounting configuration. Shell Sizes 9 thru 51 D TYP. C D TYP. A C .450.002 (11.430.05) .100 +.005 -.000 (2.54) +0.13 ) R TYP. -0.00 C .030 (0.76) TYP. D B B FULL R. (TYP.) A + + + + FULL R. (TYP.) .015 (0.38)R. MAX.(TYP) 26/27TYP FULL R. (TYP.) Figure 1 Front Mounting Figure 2 Rear Mounting PANEL REF. Figure 3 Edgeboard Mounting Shell Size 100 .450+_.002 .118 +.005 -.000 1.805 (3.00 +0.13 ) +.005 -.000 (45.85 +0.13 ) -0.00 -0.00 +.005 -.000 (45.85 +0.13 -0.00 ) +.005 -.000 (3.00 +0.13 ) -0.00 .118 .361 1.456 R. MAX (TYP.) +.004 1.520 -.000 (38.61 +0.10 ) .125 -0.00 ) Figure 1 Front Mounting NOTES: 1. Front panel mounting is the preferred mounting method. Front panel mounting dimensions (figure 1) will accommodate either #2-56 screws or jackpost hardware. 2. Rear panel mount dimensions (figure 2) will accommodate #2-56 screw hardware only. When mounting the connector with rear panel mount jackpost see the panel cut-out dimensions. 3. Edgeboard mounting bracket (figure 3) uses #256 screws. Dimension .450+/-.002 (11.43+/0.05) locates the MDM receptacle flush with the end of the board. FULL R. (TYP.) FULL R. (TYP.) Figure 2 Rear Mounting PANEL REF. Figure 3 Edgeboard Mounting Shell Size Cutout Figure 1 A +.004 -.000 .408 B +.004 -.000 .271 C +.005 -.000 .570 D +.005 -.000 .089 9 2 .401 .252 .570 .089 3 - - .570 .089 1 .558 .271 .720 .089 2 .551 .252 .720 .089 3 - - .720 .089 1 .708 .271 .870 .089 2 .701 .252 .870 .089 3 - - .870 .089 1 .808 .271 .970 .089 2 .801 .252 .970 .089 3 - - .970 .089 1 .958 .271 1.120 .089 2 .951 .252 1.120 .089 3 - - 1.120 .089 1 1.108 .271 1.270 .089 2 1.101 .252 1.270 .089 3 - - 1.270 .089 1 1.058 .315 1.220 .089 2 1.051 .295 1.220 .089 3 - 1.220 .089 15 21 25 For 100 Shell Size NOTES: 1. Front mounting is the preferred mounting method. Front panel mounting dimensions (figure 1) will accommodate either #4-40 screws or jackpost hardware. 2. Rear panel mount dimensions (figure 2) will accommodate #4-40 screw hardware only see the panel cut-out dimensions. 3.Edgeboard mounting bracket (figure 3) uses #440 screws. Dimension .450+/-.002 (11.43+/0.05) locates the MDM receptacle flush with the end of the board. + + -0.00 (3.18 For 9-51 Shell Sizes + + (10.18 +0.10 ) +.004 -.000 (36.98 +0.10 ) -0.00 FULL R. (TYP.) .118 31 37 51 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 11 +.005 -.000 ) (3.00 +0.13 -0.00 +.004 .401 -.000 ) (9.17 +0.10 -0.00 .015 (0.38) +.005 -.000 ) (45.85 +0.13 -0.00 (0.76) TYP. 1.805 +.004 -.000 1.805 .030 (11.43+_0.05) Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (for sizes 9-51) This hardware supplied unassembled. LOCK SCREW MATING FACE #2-56 UNC-2B RETAINING CLIP .408 (10.36) MAX. .182 (4.62) .688 (17.48) MAX. MAX. .185 (4.70) MAX. CONNECTOR SHOWN FOR REF. ONLY PANEL REF. .232 (5.89) MAX. BUSHING Screw Lock Assembly #2-56 UNC-2A .093 (2.36) RECOMMENDED PANEL THICKNESS Jackpost - (P) Screw Lock Assembly* *NOTE Torque value is 2.5 in/lbs max. .052 (1.32) TYP. .096 .005 (2.44 0.13)DIA. .178 .005 (4.52 0.13) .170 (4.32) MAX. 90 Angle Mounting Bracket .500 (12.7) MAX. #2-56 UNC-2B THD .260 (6.60) MAX. B A Description 90 Angle Mounting Bracket Part Number A +/-.005 (0.13) B Max. Screw Lock Assembly 322-9500-000 N/A Jackpost kit 320-9505-000 N/A Mounting Bracket 90 MDM 015-9516-002 .147 (3.73) .308 (7.82) for 9 thru 37 Shell Sizes Mounting Bracket 90 MDM 015-9516-003 .169 (4.29) .350 (8.89) for 51 Shell Size NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit (320-9505-000) consists of two assmblies, shipped unassmbled. Jackpost Bushing (for rear panel mounting-for sizes 9-51) HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS .170 (4.32) .185 (4.70) C #2-56 UNC-2B THD MATING FACE .105 (2.67) A .100 (2.54) .126 (3.20) R TYP. .125 (3.18) DIA. TYP A 27 26 .500 (12.7) TYP Jackpost diameter within the "A" dimension is .124/.120 (3.15/3.05). Plug and Receptacle Dimensions A +.004 (0.10) Shell -.000 (0.00) Size 9 .401 (10.19) 15 .551 (14.00) 21 .701 (17.81) 25 .801 (20.34) 31 .951 (24.16) 37 1.101 (27.97) 51 1.051 (26.70) .480 (12.19) #2-56 UNC 2A THD Panel A Thickness 3/32 (2.4) 1/16 (1.6) 3/64 (1.2) 1/32 (0.8) B A +.005 (0.13) -.000 (0.00) .087 (2.21) .056 (1.42) .042 (1.07) .025 (0.64) Jackpost Kit Number* 320-9505-007 320-9505-006 320-9505-005 320-9505-004 B +.004 (0.10) -.000 (0.00) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .295 (7.49) C +_.005 (0.13) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.34) 1.265 (32.13) 1.215 (30.86) *A kit consists of 2 jackpost, 2 nuts, 2 washers. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 12 Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (sizes 9-51) This hardware is factory installed. MATING FACE .014 .004 (0.36 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .185 (4.70) MAX .150 .003 .735 (18.67) MAX. CONNECTOR SHOWN FOR REF. ONLY CONNECTOR SHOWN FOR REF ONLY HEX HEAD .050 (1.27) ACROSS FLATS .050 (1.27) DEEP (REF) .490 (12.45) MAX (3.81 .076) .155 (3.94) MAX. .093 (2.36) REF. .090 .0015 .031 .003 (2.29 0.038)DIA (0.79 0.08) MATING FACE Float Mount - (F) #2-56 UNC-2A MATING FACE PART HAS A .040 (1.02) MAX AXIAL FLOAT Jackscrew - (K) Standard Profile Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. PART HAS A .040 (1.02) MAX. AXIAL FLOAT #2-56 UNC-2A Jackscrew - (L) Low Profile * NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in-lbs Standard Jackscrew (K)-2.5 in-lbs Mounting Hardware to Military Specification (for sizes 9 - 100) per MIL-DTL-83513/5 This hardware supplied in kits unassembled (2 pieces of each item). #2-56 UNC-2A THREAD TYP. PLUG (REF. WITH .092 (2.34) DIA. MOUNTING HOLES #2-56 UNC-2A THREAD TYP. .062 (1.57) HEX. (REF.) .361 (9.17) MAX. .390 (9.91) MAX. SIZE 100 ONLY PLUG (REF.) WITH .092 (2.34) DIA. MOUNTING HOLES .010 (0.25) TH'K (REF.) .010 (0.25) TH'K (REF.) POTTING WELL (REF.) Figure 1. Jackscrew - Low profile Slotted Head Size 9-51 Size 100* Allen head Optional Head Configuration Plug and Receptacle Low and High Profile Size 9-51 Size 100* (same dimensions) .868 (22.05) MAX. .902 (22.91) MAX. POTTING WELL (REF.) Figure 2. Jackscrew - High Profile Slotted Head Size 9-51 Size 100* .125 (3.18) HEX. .187 (4.75) HEX. #2-56 UNC-2B THREAD #4-40 UNC -2A THREAD .190/.185(4.83/4.70) .185/.175(4.70/4.44) .475 .025 (12.06 0.64) SIZE 100 SAME LOCKWASHER RETAINING NUT .154 (3.91) HEX. .187 (4.75) HEX. .062 .010 (.157 0.25) SIZE 100 SAME To order hardware kits separately, order either by M83513/5-** or by 320-950X-XXX. Size 9-51 Mod Code Part Number Description ** Size 100* Mod Code Part Number ** Slotted Head Jackscrew Assy Low Profile (Figure 1) M5 320-9508-025 05 M15 320-9508-021 15 Slotted Head Jackscrew Assy Low Profile (Figure 2) M6 320-9508-027 06 M16 320-9508-023 16 Allen Head Jackscrew Assy Low Profile (Figure 1) M2 320-9508-026 02 M12 320-9508-022 12 Allen Head Jackscrew Assy High Profile (Figure 2) M3 320-9508-028 03 M13 320-9508-024 13 Jackpost Assy (Figure 3) M7 320-9505-033 07 M17 320-9505-030 17 Figure 3. Jackpost Assembly Size 9-51 Size 100* *Size 100 requires B1 size mounting holes for Mil-Spec hardware Note: Torque values as follows: Size 9-51 4.0 in-lbs Size 100 6.0 in-lbs Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 13 Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (for size 100) This hardware supplied unassembled. .123 .005 (3.12 0.13) DIA. #4-40 UNC-2B THD +.010 #4-40 UNC-2A THD 180 -.005 (4.57 +.025) PANEL MAY BE USED WITH .093 (2.36) MAX THICK PANEL #4 LOCK WASHER -0.13 A .395 (10.03) MAX. .500 (12.70) MAX. .185 (4.70) MAX. MATING SIDE #4-40 UNC-2B NOTHING OR FEMALE THD Jackpost - (P) 90Angle Mounting Bracket B .064 .010 (1.62 0.25) TYP. .235 .005 (5.97 0.13) Note: Size 100 requires .120 dia (B) mounting hole when using Commercial (P) jackpost kits. 90 Angle Mounting Bracket Part Number 320-9505-015 015-9528-000 Description Jackpost kit Mounting Bracket 90 MDM B Max. A .005 (0.13) N/A .191 (4.85) .370 (9.40) This hardware is factory installed. .014 .004 (0.36 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .185 (4.70) MAX MATING FACE .735 (18.67) MAX. CONNECTOR SHOWN FOR REF. ONLY .174 .005 (4.4 .10) HEX. SOCKET HEAD. .078 (1.98) ACROSS FLATS .050 (1.27) MIN. DEPTH .155 (3.94) MAX. .093 (2.36) REF. .040 (1.02) MAX. AXIAL FLOAT .116 .002 (2.29 .051) DIA .031 .003 (0.79 0.08) #4-40 UNC-2A THD MATING FACE PART HAS A .040 (1.02) MAX AXIAL FLOAT MATING SIDE Jackscrew - (K) Standard Float Mount - (F) Std. #4-40 UNC-2A THD Jackscrew - (L) (Low Profile) *NOTE: Torque values are as follows: Low Profile Jackscrew (L)-4.0 in-lbs Standard Profile Jackscrew (K)-4.0 in-lbs Jackpost Bushing (for Rear Panel Mounting) ENGAGING FACE Dimensions for Rear Panel Mounting 3/16" HEX. LOCKING POST 1.800 .005 (45.72 0.13) #4-40 UNC-2B .185 (4.70) +.004 .401 -.000 (10.18 +1.10 ) -0.00 .170 (4.32) Panel Thickness A +.005 (0.13) -.000 (0.00) Jackpost Kit Number* 3/32 (2.4) 1/16 (1.6) 1/32 (0.8) 3/64 (1.2) .087 (2.21) .058 (1.42) .025 (0.64) .042 (1.07) 320-9505-013 320-9505-012 320-9505-010 320-9505-011 A .500 (12.70) MAX. +.004 1.516 -.000 RECEPTACLE SHOWN FOR REF. ONLY #4-40 THREAD RETAINING NUT +.005 .125 -.000 R (3.18 +0.13 ) -0.00 .161 (4.09) .159 (4.04) DIA. (38.51 +1.10 ) -0.00 *2 jackposts, 2 nuts, 2 washers Torque value for size 100 Note: Size 100 requires B mounting hole shell size when using rear panel mount jackposts Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 14 Micro-D Metal Shell - .050" Contact Spacing MDM Connector Saver Save wear and tear on your equipment and systems connectors by using the "Connector Saver". Simply mate the "Connectors Saver" to your unit and use the opposite side for your testing interface...less wear, less tear, less chance of damage. It is available in all eight standard MDM layouts. Mating hardware is available and can be ordered either separately or included with the connector saver. The multi-matings and unmatings experienced by most connectors during testing and final check out can be eliminated. .790 (20.07) MAX. .040 (1.02) MAX. ALLOWABLE AXIAL FLOAT #2-56 UNC-2A THD (9-51) (TYP.) .315 (8.00) MAX. JACKSCREW/JACKPOST BUSHING (FOR REFERENCE ONLY SEE ORDERING INFORMATION BELOW.) MICROSOCKET MICROPIN B CONNECTOR RECEPT A CONNECTOR, PLUG BACKPOTTING, EPOXY INTERFACIAL SEAL .185 (4.70) MAX. (TYP.) .090 (2.29) REF. (TYP.) C .900 (22.86) REF. E-RING (TYP.) MDM Size 9 Shown Size Electroless Nickel (A174) Plated With Hardware W/O Hardware Cadmium over Nickel (A101) Plated With Hardware W/O Hardware *Hardware Kits A Max. B .005 (0.13) C Max. 9 MDM98479-86 MDM98479-18 MDM98479-78 MDM-97294-371 320-9505-014** .785 (19.94) .565 (14.35) .308 (7.82) 15 MDM98479-87 MDM98479-19 MDM98479-79 MDM-97294-372 320-9505-014** .935 (23.75) .715 (18.16) .308 (7.82) 21 MDM98479-88 MDM98479-20 MDM98479-80 MDM-97294-373 320-9505-014** 1.085 (27.56) .865 (21.97) .308 (7.82) 25 MDM98479-89 MDM98479-21 MDM98479-81 MDM-97294-374 320-9505-014** 1.185 (30.10) .965 (24.51) .308 (7.82) 31 MDM98479-90 MDM98479-14 MDM98479-82 MDM-97294-375 320-9505-014** 1.335 (33.91) 1.115 (28.32) .308 (7.82) 37 MDM98479-91 MDM98479-15 MDM98479-83 MDM-97294-376 320-9505-014** 1.485 (37.72) 1.265 (32.13) .308 (7.82) 51 MDM98479-92 MDM98479-16 MDM98479-84 MDM-97294-377 320-9505-014** 1.435 (36.45) 1.215 (30.86) .351 (8.91) 100 MDM98479-93 MDM98479-17 MDM98479-85 MDM-97294-717 320-9508-014*** 2.170 (55.12) 1.800 (45.72) .394 (10.01) * Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings. ** Size 9-51-#2-56 UNC-2B Thread *** Size 100-#4-40 UNC-2B Thread Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 15 Micro-D Metal Shell - .050" Contact Spacing MIL-DTL-83513 How to Order - MIL-DTL-83513 Part Number Nomenclature - Slash Sheets 1-9 M83513/ 01 - SERIES MDM MDB MDVB - H100 - * * **** Metal Shell, Liquid Crystal Polymer (LCP) Diallyl Phthalate Insulator Polyester Insulator MIL-C-83513 SLASH SHEET 01 02 03 04 05 06 07 08 09 - Plug, Connector, Solderpot Receptacle, Connector, Solderpot Plug, Connector, Crimp Type Receptacle, Connector, Crimp Type 7 Hardware Only Plug, Connector, Solderpot Receptacle, Connector, Solderpot Plug, Connector, Crimp Type Receptacle, Connector, Crimp Type Metal Shell Plastic 5 INSERT ARRANGEMENT A B C D E F G H - METAL SHELL PLASTIC 9 Contact 15 Contact 21 Contact 25 Contact 31 Contact 37 Contact 51 Contact 100 Contact 9 Contact 15 Contact 21 Contact 25 Contact 31 Contact 37 Contact 51 Contact 5 WIRE TYPE No Number - For Solderpot 01 - 18" long, #26 AWG per MIL-W-22759/11-26-9 (all white) 02 - 36" long, #26 AWG per MIL-W-22759/11-26-9 (all white) 03 - 18" long, #26 AWG per MIL-W-22759/11-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating 04 - 36" long, #26 AWG per MIL-W-22759/11-26Color Coded per MIL-STD-681, System 1, 10 colors repeating 05 - .5" long. #25 AWG, type S per QQ-W-343, Gold Plated 06 - 1.0" long, #25 AWG, type S per QQ-W-343, Gold Plated 07 - .5" long, #25 AWG, type S per QQ-W-W-343, Tin Plated 08 - 1.0" long, #25 AWG, type S per QQ-W-343, Tin Plated 09 - 18" long, #26 AWG per MIL-W-22759/33-26-9 (all white) 10 - 36" long, #26 AWG per MIL-W-22759/33-26-9 (all white) 11 - 18" long, #26 AWG per MIL-W-22759/33-26 NOTES: Color Coded per MIL-STD-681, System 1, 10 colors repeating 1 - For every Mil Spec Part Number, ITT has one corresponding 12 - 36" long, #26 AWG per MIL-W-22759/33-26 part number shown an example Color Coded per MIL-STD-681, System 1, 10 colors repeating 2 - Tolerance on wire lengths: 18", 36" and 72" long -- 13 - 72" long, #26 AWG per MIL-W-22759/11-26-9 (all white) +1.00"/-0.00" 14 - 72" long, #26 AWG per MIL-W-22759/11-26 .5" and 1.00" -- + .200"/-.000" 3 - For space application, connector shell finish must be "A174" Color Coded per MIL-STD-681, System 1, 10 colors repeating and wire must be per MIL-W-22759/33-26. 15 - 72" long, #26 AWG per MIL-W-22759/33-26-9 (all white) 4 - Any deviations to these P/N's will result in assignment of a 16 - 72" long, #26 AWG per MIL-W-22759/33-26 special P/N, consult factory. Color Coded per MIL-STD-681, System 1, 10 colors repeating Size 100 not available in / 06 through / 09. (Plastic shell) 5 6 - Color coding in accordance with MIL-STD-681, System 1, no parenthesis. See page 83 for color code chart. 7 - For mounting hardware to Military Specification (sizes 9 to 100) see page 13. 6 6 3 3 3 6 3 6 6 3 3 6 SHELL FINISH No number - for plastic type connector C - for Cadmium/Yellow chromate over nickel N - A174 - Electroless Nickel A174 3 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 16 Micro-D Metal Shell - .050" Contact Spacing MIL-DTL-83513 How to Order - MIL-DTL-83513 Part Number Nomenclature - Slash Sheets 10-27 M83513/ 10 - A SERIES Connector, Electrical, Rectangular Microminiature, Polarized Shell PC Board Mounting MIL-C-83513 SLASH SHEET 10 - Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 - 37 11 - Connector, Plug, CBR, Size 51 12 - Connector, Plug, CBR, Size 100 13 - Connector, Receptacle, CBR, Sizes 9 - 37 14 - Connector, Receptacle, CBR Size 51 15 - Connector, Receptacle, CBR, Size 100 16 - Connector, Plug, Board Right Angle (BR), Sizes 9 - 37 17 - Connector, Plug, BR, Size 51 18 - Connector, Plug, BR, Size 100 19 - Connector, Receptacle, BR, Sizes 9 - 37 20 - Connector, Receptacle, BR Size 51 21 - Connector, Receptacle, BR Size 100 22 - Connector, Plug, Board Straight (BS), Sizes 9 - 37 23 - Connector, Plug, BS, Size 51 24 - Connector, Plug, BS, Size 100 25 - Connector, Receptacle, BS, Sizes 9 - 37 26 - Connector, Receptacle, BS, Size 51 27 - Connector, Receptacle, BS Size 100 INSERT ARRANGEMENT METAL SHELL A B C D E F G H NOTES: 1 - For every Mil Spec Part Number, ITT has one 2 - 3 - For space application, connector shell finish must be "N". 4 - Any deviations to these P/N's will result in assignment of a special P/N, consult customer service. corresponding part number Tolerance on wire lengths .015 9 Contact - 15 Contact - 21 Contact - 25 Contact - 31 Contact - 37 Contact - 51 Contact - 100 Contact WIRE TYPE No Number - For Solderpot 01 - .109" long, #24 AWG solid copper wire per QQ-W-343, Type "S", solder dipped 02 - .140" long, #24 AWG solid copper wire per QQ-W-343, Type "S", solder dipped 03 - .172" long, #24 AWG solid copper wire per QQ-W-343, Type "S", solder dipped SHELL FINISH No letter - for plastic type connector C - Cadmium / Yellow chromate over nickel N - Electroless Nickel 3 3 HARDWARE N - No jackpost P - Jackpost (permanently attached) T - Threaded insert Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 17 2 ** C *