157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 1Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
Power Ultra Miniature Snap-In
Fig. 1
FEATURES
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large types, very small dimensions, cylindrical
aluminum case, insulated with a blue sleeve
• Useful life: 5000 h at 85 °C
• Keyed polarity version available
• Material categorization: For definitions please see
www.vishay.com/doc?99912
APPLICATIONS
• General purpose, industrial and audio/video systems
• Smoothing and filtering
• Standard and switched mode power supplies
• Energy storage in pulse systems
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code (YYMM or in 2 digits according to IEC 60062)
• Name of manufacturer
• Code for factory of origin
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
• Code number, last 8 digits 157 xxxxx
• Climatic category in accordance with IEC 60068
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes
(Ø D x L in mm) 22 x 25 to 35 x 60
Rated capacitance range
(E6/E12 series), CR56 μF to 2200 μF
Tolerance on CR± 20 %
Rated voltage range, UR200 V, 250 V 400 V, 450 V
Category temperature range - 25 °C to + 85 °C
Endurance test at 85 °C 3000 h
Load life at 85 °C 3000 h
Useful life at 85 °C 5000 h
Useful life at 40 °C,
1.4 x IR applied 90 000 h
Shelf life at 0 V, 85 °C 1000 h
Based on sectional
specification IEC 60384-4/EN130300
Climatic category IEC 60038 25/085/56
157
PUM-SI
057
PSM-SI
159
PUL-SI
105 °C
smaller
dimensions
198
PHR-SI
longer life
higher ripple
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
200 250 400 450
56 - - - 22 x 25
68 - - 22 x 25 22 x 30
82 --22x2522x30
---25x25
100 --22x3022x35
---25x30
120
--22x3022x40
---25x30
---30x25
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 2Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
TWO TERMINAL SNAP-IN
Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram
150
--22x3525x35
--25x3025x40
---30x30
180
--22x4025x40
--25x3530x35
---35x25
220
- 22 x 30 25 x 40 25 x 50
--30x3030x40
--35x2535x30
270
22 x 25 22 x 30 25 x 45 30 x 45
- 25 x 25 30 x 35 35 x 35
--35x30-
330 22 x 30 22 x 35 30 x 40 30 x 50
- 25 x 30 35 x 30 35 x 40
390 22 x 30 22 x 40 30 x 45 35 x 45
-30x2535x35-
470 22 x 35 25 x 35 30 x 50 35 x 50
25 x 30 30 x 30 35 x 40 -
560
22 x 40 25 x 40 35 x 45 -
25 x 35 30 x 30 - -
30 x 25 35 x 25 - -
680
25 x 40 25 x 45 35 x 50 35 x 60
30 x 30 30 x 35 - -
35 x 25 35 x 30 - -
820
25 x 45 30 x 40 35 x 60 -
30 x 35 35 x 35 - -
35x30---
1000 30 x 40 30 x 45 - -
35 x 30 35 x 40 - -
1200 30 x 45 35 x 45 - -
35x35---
1500 30 x 50 35 x 50 - -
35x40---
1800 35 x 45 - - -
2200 35 x 50 - - -
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
200 250 400 450
+ Terminal
- Terminal
L
Bottom view 5.8 mm
+ 0
- 1
Ø D
L + 2 max.
The minus terminal can be marked with a black dot or
with an imprinted “-” sign.
Ø 2 ± 0.1 (2 x)
10
± 0.1
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 3Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
THREE TERMINAL SNAP-IN
Fig. 4 - Three terminal snap-in Fig. 5 - Mounting hole diagram
Table 1
Ø D
L + 2 max.
4 ± 0.5
L
The negative terminal has TWO pins which are BOTH
electrically connected.
Bottom view
Minus pole
marking
+ Terminal
- Terminal
Ø 2 ± 0.1 (2 x)
Ø 2.5 ± 0.1
3.3 ± 0.1
4.75 ± 0.1
10 ± 0.1
The 10 mm spacing of the 2 pin snap-in is used as the base
layout and a third hole is added.
The third hole is closer to the negative primary hole so that
polarization is always maintained, together with added
mechanical stability.
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
Ø Dmax. Lmax. MASS
(g)
PACKAGING QUANTITIES
(units per box)
22 x 25 23 27 12 100
22 x 30 23 32 16 100
22 x 35 23 37 20 100
22 x 40 23 42 23 100
25 x 25 26 27 20 100
25 x 30 26 32 22 100
25 x 35 26 37 24 100
25 x 40 26 42 27 100
25 x 45 26 47 32 100
25 x 50 26 52 38 100
30 x 25 31 27 25 100
30 x 30 31 32 30 100
30 x 35 31 37 35 100
30 x 40 31 42 40 100
30 x 45 31 47 45 100
30 x 50 31 52 50 100
35 x 25 36 27 33 50
35 x 30 36 32 40 50
35 x 35 36 37 48 50
35 x 40 36 42 55 50
35 x 45 36 47 63 50
35 x 50 36 52 72 50
35 x 60 36 62 82 50
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 4Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) ESR at 120 Hz is approximately 0.95 x ESR 100 Hz
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ORDERING EXAMPLE
Electrolytic capacitor 157 series
1000 μF/200 V; ± 20 %
Nominal case size: Ø 30 x 40 mm
2-terminal snap-in:
Ordering code: MAL2 157 52102 E3
Former 12NC: 2222 157 52102
3-terminal snap-in:
Ordering code: MAL2 157 72102 E3
Former 12NC: 2222 157 72102
Table 2
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 100 Hz/120 Hz
IRRated RMS ripple current at 120 Hz, 85 °C
IL5 Max. leakage current after 5 min at UR
ESR Typ./max. equivalent series resistance at 100 Hz (1)
Z Typ./max. impedance at 10 kHz
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
120 Hz
85 °C
(A)
IL5
5min
(mA)
TYP. ESR
100 Hz (1)
(m)
MAX. ESR
100 Hz (1)
(m)
TYP. Z
10 kHz
(m)
MAX. Z
10 kHz
(m)
ORDERING CODE
MAL2157.......
2-TERM. 3-TERM.
200
270 22 x 25 1.15 0.54 550 880 420 700 52271E3 72271E3
330 22 x 30 1.36 0.66 430 720 300 500 52331E3 72331E3
390 22 x 30 1.46 0.78 390 650 295 490 52391E3 72391E3
470 22 x 35 1.68 0.94 350 580 240 400 32471E3 12471E3
470 25 x 30 1.67 0.94 350 580 240 400 52471E3 72471E3
560 22 x 40 1.91 1.12 255 425 235 390 42561E3 22561E3
560 25 x 35 1.91 1.12 255 425 235 390 32561E3 12561E3
560 30 x 25 1.89 1.12 255 425 235 390 52561E3 72561E3
680 25 x 40 2.18 1.36 210 350 205 340 42681E3 22681E3
680 30 x 30 2.04 1.36 210 350 205 340 52681E3 72681E3
680 35 x 25 2.06 1.36 210 350 205 340 62681E3 82681E3
820 25 x 45 2.46 1.64 170 290 145 240 62821E3 82821E3
820 30 x 35 2.35 1.64 170 290 145 240 32821E3 12821E3
820 35 x 30 2.29 1.64 170 290 145 240 52821E3 72821E3
1000 30 x 40 2.66 2.00 140 235 135 225 52102E3 72102E3
1000 35 x 30 2.33 2.00 140 235 135 225 62102E3 82102E3
1200 30 x 45 2.98 2.40 120 200 110 190 32122E3 12122E3
1200 35 x 35 2.69 2.40 120 200 110 190 62122E3 82122E3
1500 30 x 50 3.31 3.00 110 180 95 155 42152E3 22152E3
1500 35 x 40 3.04 3.00 110 180 95 155 52152E3 72152E3
1800 35 x 45 3.36 3.60 100 160 80 130 42182E3 22182E3
2200 35 x 50 3.68 4.40 90 150 65 105 52222E3 72222E3
250
220 22 x 30 1.23 0.55 600 1080 420 700 53221E3 73221E3
270 22 x 30 1.32 0.67 490 880 335 560 43271E3 23271E3
270 25 x 25 1.23 0.67 490 880 335 560 53271E3 73271E3
330 22 x 35 1.53 0.82 400 720 255 430 33331E3 13331E3
330 25 x 30 1.56 0.82 400 720 255 430 53331E3 73331E3
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 5Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
250
390 22 x 40 1.74 0.97 330 610 250 425 43391E3 23391E3
390 30 x 25 1.58 0.97 330 610 250 425 53391E3 73391E3
470 25 x 35 1.87 1.17 280 505 190 320 33471E3 13471E3
470 30 x 30 1.89 1.17 280 505 190 320 53471E3 73471E3
560 25 x 40 2.12 1.40 240 425 185 310 43561E3 23561E3
560 30 x 30 1.97 1.40 240 425 185 310 53561E3 73561E3
560 35 x 25 1.80 1.40 240 425 185 310 63561E3 83561E3
680 25 x 45 2.29 1.70 200 350 155 260 63681E3 83681E3
680 30 x 35 2.28 1.70 200 350 155 260 33681E3 13681E3
680 35 x 30 2.20 1.70 200 350 155 260 53681E3 73681E3
820 30 x 40 2.57 2.05 160 290 125 210 53821E3 73821E3
820 35 x 35 2.54 2.05 160 290 125 210 63821E3 83821E3
1000 30 x 45 2.88 2.50 140 235 105 180 33102E3 13102E3
1000 35 x 40 2.86 2.50 140 235 105 180 53102E3 73102E3
1200 35 x 45 3.17 3.00 120 200 95 160 43122E3 23122E3
1500 35 x 50 3.49 3.75 90 160 85 140 53152E3 73152E3
400
68 22 x 25 0.71 0.27 1400 2800 1170 1950 56689E3 76689E3
82 22 x 25 0.77 0.33 1250 2500 970 1620 56829E3 76829E3
100 22 x 30 0.94 0.40 1125 2250 750 1220 56101E3 76101E3
120 22 x 30 0.97 0.48 990 1980 700 1140 56121E3 76121E3
150 22 x 35 1.13 0.60 750 1500 540 900 36151E3 16151E3
150 25 x 30 1.16 0.60 750 1500 540 900 56151E3 76151E3
180 22 x 40 1.29 0.72 630 1260 435 725 46181E3 26181E3
180 25 x 35 1.35 0.72 630 1260 435 725 36181E3 16181E3
220 25 x 40 1.54 0.88 520 1040 355 590 46221E3 26221E3
220 30 x 30 1.50 0.88 520 1040 355 590 56221E3 76221E3
220 35 x 25 1.42 0.88 520 1040 355 590 66221E3 86221E3
270 25 x 45 1.72 1.08 430 860 335 560 66271E3 86271E3
270 30 x 35 1.74 1.08 430 860 335 560 36271E3 16271E3
270 35 x 30 1.71 1.08 430 860 335 560 56271E3 76271E3
330 30 x 40 1.97 1.32 350 700 315 525 56331E3 76331E3
330 35 x 30 1.76 1.32 350 700 315 525 66331E3 86331E3
390 30 x 45 2.19 1.56 300 610 250 420 56391E3 76391E3
390 35 x 35 2.04 1.56 300 610 250 420 36391E3 16391E3
470 30 x 50 2.40 1.88 250 505 210 350 46471E3 26471E3
470 35 x 40 2.30 1.88 250 505 210 350 56471E3 76471E3
560 35 x 45 2.55 2.24 210 425 180 305 46561E3 26561E3
680 35 x 50 2.79 2.72 190 380 160 265 56681E3 76681E3
820 35 x 60 3.33 3.28 155 315 115 215 56821E3 76821E3
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
120 Hz
85 °C
(A)
IL5
5min
(mA)
TYP. ESR
100 Hz (1)
(m)
MAX. ESR
100 Hz (1)
(m)
TYP. Z
10 kHz
(m)
MAX. Z
10 kHz
(m)
ORDERING CODE
MAL2157.......
2-TERM. 3-TERM.
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 6Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) ESR at 120 Hz is approximately 0.95 x ESR 100 Hz
450
56 22 x 25 0.68 0.25 1650 3300 1120 1880 57569E3 77569E3
68 22 x 30 0.80 0.30 1400 2800 920 1530 57689E3 77689E3
82 22 x 30 0.87 0.36 1200 2400 780 1290 47829E3 27829E3
82 25 x 25 0.85 0.36 1200 2400 780 1290 57829E3 77829E3
100 22 x 35 1.00 0.45 1000 2000 630 1050 37101E3 17101E3
100 25 x 30 1.02 0.45 1000 2000 630 1050 57101E3 77101E3
120 22 x 40 1.15 0.54 800 1600 530 885 47121E3 27121E3
120 25 x 30 1.09 0.54 800 1600 530 885 57121E3 77121E3
120 30 x 25 1.10 0.54 800 1600 530 885 67121E3 87121E3
150 25 x 40 1.35 0.67 650 1300 420 705 47151E3 27151E3
150 25 x 35 1.27 0.67 650 1300 420 705 67151E3 87151E3
150 30 x 30 1.32 0.67 650 1300 420 705 57151E3 77151E3
180 25 x 40 1.45 0.81 570 1150 360 605 47181E3 27181E3
180 30 x 35 1.49 0.81 570 1150 360 605 57181E3 77181E3
180 35 x 25 1.35 0.81 570 1150 360 605 67181E3 87181E3
220 25 x 50 1.73 0.99 450 900 315 525 47221E3 27221E3
220 30 x 40 1.72 0.99 450 900 315 525 57221E3 77221E3
220 35 x 30 1.61 0.99 450 900 315 525 67221E3 87221E3
270 30 x 45 1.95 1.21 380 770 270 450 37271E3 17271E3
270 35 x 35 1.86 1.21 380 770 270 450 67271E3 87271E3
330 30 x 50 2.19 1.48 300 600 230 390 47331E3 27331E3
330 35 x 40 2.10 1.48 300 600 230 390 57331E3 77331E3
390 35 x 45 2.34 1.75 250 500 190 340 47391E3 27391E3
470 35 x 50 2.60 2.11 210 420 170 290 57471E3 77471E3
680 35 x 60 3.15 3.06 150 300 110 200 57681E3 77681E3
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage
400 V versions Us= 1.1 x UR
250 V versions Us=1.15 x U
R
Reverse voltage 1V
Current
Leakage current After 5 min at URIL5 0.01 CRx UR
Inductance
Equivalent series inductance (ESL) All case sizes Typ. 19 nH
Max. 25 nH
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
120 Hz
85 °C
(A)
IL5
5min
(mA)
TYP. ESR
100 Hz (1)
(m)
MAX. ESR
100 Hz (1)
(m)
TYP. Z
10 kHz
(m)
MAX. Z
10 kHz
(m)
ORDERING CODE
MAL2157.......
2-TERM. 3-TERM.
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 7Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Fig. 6 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz) IR MULTIPLIER
50 0.90
100 0.95
120 1.00
200 1.15
1000 1.30
10 000 1.40
1.3
1.2
1.1
1.0
0.8
0.5
0.0
40 50 60 70 80 90
IA
IR
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
(1)
45
60
30
20
10
8
5
4
3
2
2.5
1.5
1
1.2
15
MGA453
life multiplier
Tamb (°C)
IA = Actual ripple current at 120 Hz
IR = Rated ripple current at 120 Hz and 85 °C
(1) Useful life at 85 °C and IR applied: 5000 h
157 PUM-SI
www.vishay.com Vishay BCcomponents
Revision: 09-Mar-12 8Document Number: 28338
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4/
EN130300
subclause 4.13
Tamb =85°C; U
R applied;
3000 h
C/C: ± 10 %
ESR 2 x spec. limit
IL5 spec. limit
Load life Tamb =85°C; U
R and IR applied;
3000 h
C/C: ± 20 %
ESR 2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1
Tamb =85°C; U
R and IR applied;
5000 h
C/C: ± 30 %
ESR 3 x spec. limit
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage: 3 %
Shelf life
(storage at
high temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 85 °C; no voltage applied;
1000 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C: ± 15 %
ESR 1.5 x spec. limit
IL5 1 x spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
