1HP04CH
No. A0926-1/4
Features
•4V drive.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Drain-to-Source Voltage VDSS --100 V
Gate-to-Source Voltage VGSS ±20 V
Drain Current (DC) ID--80 mA
Drain Current (Pulse) IDP PW≤10µs, duty cycle≤1% --320 mA
Allowable Power Dissipation PDMounted on a ceramic board (900mm2✕0.8mm) 0.6 W
Channel Temperature Tch 150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Drain-to-Source Breakdown Voltage V(BR)DSS ID=--1mA, VGS=0V --100 V
Zero-Gate Voltage Drain Current IDSS VDS=--100V, VGS=0V --1µA
Gate-to-Source Leakage Current IGSS VGS=±16V, VDS=0V ±10 µA
Cutoff Voltage VGS(off) VDS=--10V, ID=--100µA --1.2 --2.6 V
Forward T ransfer Admittance yfsVDS=--10V, ID=--40mA 85 145 mS
Static Drain-to-Source On-State Resistance
RDS(on)1 ID=--40mA, VGS=--10V 13.5 18 Ω
RDS(on)2 ID=--20mA, VGS=--4V 15 21 Ω
Input Capacitance Ciss VDS=--20V, f=1MHz 14.5 pF
Output Capacitance Coss VDS=--20V, f=1MHz 2.5 pF
Reverse T ransfer Capacitance Crss VDS=--20V, f=1MHz 1.0 pF
Marking : WB Continued on next page.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENA0926
82907PE TI IM TC-00000808
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer
'
s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'
s products or
equipment.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
SANYO Semiconductors
DATA SHEET
1HP04CH P-Channel Silicon MOSFET
General-Purpose Switching Device
Applications
1HP04CH
No. A0926-2/4
Continued from preceding page. Ratings
Parameter Symbol Conditions min typ max Unit
Turn-ON Delay T ime td(on) See specified Test Circuit. 34 ns
Rise T ime trSee specified Test Circuit. 28 ns
Turn-OFF Delay Time td(off) See specified Test Circuit. 490 ns
Fall T ime tfSee specified Test Circuit. 160 ns
Total Gate Charge Qg VDS=--50V, VGS=--10V, ID=-- 80mA 1.7 nC
Gate-to-Source Charge Qgs VDS=--50V, VGS=--10V, ID=-- 80mA 0.42 nC
Gate-to-Drain “Miller” Charge Qgd VDS=-- 50V, VGS=-- 10V, ID=-- 80mA 0.20 nC
Diode Forward Voltage VSD IS=--80mA, VGS=0V -- 0.84 -- 1.2 V
Package Dimensions Switching Time Test Circuit
unit : mm (typ)
7015A-004
1 : Gate
2 : Source
3 : Drain
SANYO : CPH3
2.9
0.05
0.4
2.8
1.6
0.2
0.6 0.6
0.9
0.2
0.15
21
3
0.95
PW=10µs
D.C.≤1%
P.G 50Ω
G
S
D
ID= --40mA
RL=1250Ω
Rg
VDD= --50V
VOUT
1HP04CH
VIN
0V
--10V
VIN
Rg=5kΩ
ID -- VDS ID -- VGS
Drain-to-Source Voltage, VDS -- V
Drain Current, ID -- mA
Gate-to-Source Voltage, VGS -- V
RDS(on) -- VGS RDS(on) -- Ta
Static Drain-to-Source
On-State Resistance, RDS(on) -- Ω
Gate-to-Source Voltage, VGS -- V
Static Drain-to-Source
On-State Resistance, RDS(on) -- Ω
Ambient Temperature, Ta -- °C
Drain Current, ID -- mA
--20
--160
--60
--100
--140
--40
--80
--120
0
0
--20
--10
--60
--40
--30
--70
--50
--80
0
--2.0--1.6--1.2--0.2 --0.4 --0.8 --1.8--1.4--0.6 --1.0
IT12910
0--1.0--0.5 --2.0 --3.0--1.5 --2.5 --3.5 --4.0
IT12911
IT12913
0--2--4--6 --8 --16--10 --12 --14
IT12912
40
0
20
10
5
30
25
15
35
Ta=
75
°
C
25°C
--25
°
C
Ta=25°C
VGS= --2.5V
VDS= --10V
--60
0
20
30
25
35
10
15
5
40
--40 --20 0 20 40 60 80 100 120 140 160
VGS= --4V, ID= --20mA
V
GS
=
--
10V, I
D
=
--
40mA
--
10.0V
ID= --20mA
--40mA
--
3.0V
--
4.0V
--
15.0V
--
5.0V
--
8.0V
1HP04CH
No. A0926-3/4
PD -- Ta
Ambient Temperature, Ta -- °C
Allowable Power Dissipation, PD -- W
VGS -- Qg
SW Time -- IDCiss, Coss, Crss -- VDS
y
fs -- IDIS -- VSD
Drain Current, ID -- mA
Switching Time, SW Time -- ns
Drain Current, ID -- mA
Forward T ransfer Admittance,
y
fs -- mS
Diode Forward Voltage, VSD -- V
Source Current, IS -- mA
Drain-to-Source Voltage, VDS -- V
Ciss, Coss, Crss -- pF
Total Gate Charge, Qg -- nC
Gate-to-Source Voltage, VGS -- V
A S O
Drain-to-Source Voltage, VDS -- V
Drain Current, ID -- A
0 0.2 0.6 1.00.4 0.8 2.01.61.2 1.81.4
0
--1
--2
--6
--4
--3
--7
--8
--9
--5
--10
IT12918
7
10
100
5
3
2
7
5
3
2
2
7
1000
5
3
IT12916
IT12914
--1.0 --10
23 5 27--100
357 0--10 --20 --60 --80--40--30 --70 --90--50 --100
1.0
10
5
3
3
7
2
7
5
5
IT12917
IT12915
--0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4
--0.1
--1.0
7
5
3
2
2
--10
7
5
3
2
--100
7
5
3
2
2
5
3VGS=0V
--25
°
C
25°C
Ta=
75°C
td(on)
td(off)
tf
tr
VDD=
--
50V
VGS=
--
10V
Ciss
Coss
Crss
VDS= --50V
ID= --80mA
--0.1
1.0 --1.0
23 57 2 --10
357 2 --100
357
10
7
5
3
2
5
3
2
2
100
7
5
3
VDS= --10V
75
°
C
Ta= --25°
C
25°
C
f=1MHz
020406080100 120 140 160
0
0.4
0.3
0.2
0.1
0.7
0.5
0.6
2
3
5
7
2
3
5
7
3
2
--0.1
5
7
--0.01
--0.001 23 57 23 57 23 57 23
--0.1 --1.0 --10 --100
Operation in this area
is limited by RDS(on).
IDP= --320mA
ID= --80mA
100ms
10ms
1ms
PW≤10µs
DC operation (Ta=25°C)
100µs
IT12909
IT12919
Ta=25°C
Single pulse
Mounted on a ceramic board (900mm2✕0.8mm)
Mounted on a ceramic board (900mm2✕0.8mm)
1HP04CH
No. A0926-4/4
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
PS
Note on usage : Since the 1HP04CH is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
This catalog provides information as of August, 2007. Specifications and information herein are subject
to change without notice.
