F-219 (Rev 12APR19) SFSD-20-30-G-05.00-DS-NUS SFSDT-10-28-G-05.00-DR-NUS (1.27 mm) .050" SFSD, SFSDT SERIES TIGER EYE DISCRETE CABLE ASSEMBLY TM SPECIFICATIONS For complete specifications see www.samtec.com?SFSD or www.samtec.com?SFSDT Insulator Material: Black LCP Contact Material: BeCu Plating: Au over 50 " (1.27 m) Ni Current Rating (SFSD/TFC): 2.9 A per pin (2 pins powered) Operating Temp Range: -10 C to +80 C (PVC) -40 C to +125 C (*Teflon(R)) Voltage Rating: 275 VAC (PVC) 235 VAC (*Teflon(R)) Wire: 28 or 30 AWG RoHS Compliant: Yes *DuPontTM Teflon (R) is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality FILE NO. E111594 COMPONENTS * For body, see www.samtec.com?ISDF * For contacts, see www.samtec.com?CC03R www.samtec.com?CC03M APPLICATION -28C CABLE COLOR CODING PIN COLOR 1 2 3 4 5 6 7 8 9 10 ETC BROWN RED ORANGE YELLOW GREEN VIOLET GRAY WHITE BLACK BLUE REPEAT Mates with: TFM, TFC (-SR & -DR requires -WT option) ALSO AVAILABLE -SR/-DR APPLICATIONS (MOQ Required) * Other sizes * Locking feature for mating to the TFML Series * Color coded cable (*Teflon(R) N/A) * Other plating options When Mated to TFM-WT Terminal/Housing Retention Min (22.25 N) 5.0 lb Max (26.52 N) 5.96 lb Avg (24.34 N) 5.47 lb Wire/Crimp Retention Min (20.47 N) 4.6 lb Max (36.49 N) 8.2 lb Avg (29.95 N) 6.73 lb TYPE STRIP POSITIONS PER ROW SFSD = Double Row PVC Cable SFSDT = Double Row *Teflon(R) Cable -03, -04, -05, -07, -10, -15, -20, -25, -40, -50 (Standard sizes) Single or double ended WIRE GAUGE -28 = 28 AWG -28C = Color Coded Cable (SFSD only) -30 Note: Teflon(R) cable is intended for crimp only. Contact Samtec for solderable cable applicators. Retention latch and screw down options PLATING OPTION ASSEMBLED LENGTH -G -"XX.XX" = 10 " (0.25 m) Gold on contact, Gold Flash on balance No. of Positions x (1.27) .050 + (0.38) .015 = 30 AWG 01 = Assembled Length in Inches (76.20 mm) 03.00" min. for -S end option (82.60 mm) 03.25" min. for -D end option (1.27) .050 End 1 Notch (Always Up) (2.03) .080 (6.35) .250 (6.32) .249 Assembled Length (3.18) .125 (2.86) .113 -D = Double Ended For -(X) specify "S" for single ended and "D" for double ended. = Retention Latch (TFM -WT option required for mating) = Screw Down (Not available in -03, -04 & -50 positions) (Mates with TFM-DS option) End 2 notch location determined by part number -SR -D-NUS SFSD or SFSDT Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM END 2 OPTION -S = Single Ended -(X)S (1.27) .050 (1.65) .065 END OPTION -(X)R 02 (11.18) .440 Notes: For wiring option and pin position location information, refer to drawings on web. Some lengths, styles and options are non-standard, non-returnable. 28 or 30 AWG All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. Requires -D, -DS, -DR (End 1 Notch Up) -NUS = Notch up, straight (Pin 1 to Pin N-1) -NDS = Notch down, straight (Pin 1 to Pin 2) -NUX = Notch up, crossed (Pin 1 to Pin N) -NDX = Notch down, crossed (Pin 1 to Pin 1)