Applicable Parts
ADRF6655
Product Details
ADRF6655-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. It
requires 5 V/310 mA power supply for normal operation. The power supply
should be connected to the clip leads, labeled VCC and GND. Another 3.2 V
supply rail may be needed for IP3SET clip lead, which adjusts mixer core bias
current. 3P3V_LDO and 2P5V_LDO clip leads each provide 3.3 V and 2.5 V
LDO. All signal ports are populated with edge-mounted SMA connectors. RF
port is the mixer RF input port configured for single-ended signaling. LO port
provides the options to either output the LO signal generated by internal PLL or
drive the mixer via an external LO source (see ADRF6655 data sheet for more
information). OUT port is the mixer IF output port for single-ended… Show
More..
2See All 1Data Sheets 1Evaluation Documentation
ADRF6655: Broadband Up/Downconverting Mixer with Integrated
Fractional-N PLL and VCO (Rev. A) PDF
3.17 M
ADRF6655 Gerber Files ZIP
762 kB