OS-CON Line-up TPC Surface mount type Guidelines and precautions Selection guide Items Condition (V) - (V) Surge voltage 8.0 7.2 - Capacitance tolerance () Specifications 6.3 - Category temperature range () 120Hz/20 100kHz/20 Characteristics of impedance ratio at high temp. and low temp. -55 Z/Z20 100kHz/20 105 Z/Z20 105, 2,000h B2 size :105, 1,000h, Rated voltage applied Endurance C/C DF Rated temp. 85 products: 85, 1,000h, rated voltage applied Surge Please see the attached characteristics list 0.6 to 2.0 0.6 to 2.0 Within20% of the initial value 1.5 times of the initial limit Within the initial limit Within40%,-20% of the initial value DF < LC 1.5 times of the initial limit 3 times of the initial limit < 3 times of the initial limit < Within5% of the initial value C/C Within the initial limit DF LC Rated temp. 85 products:85 Please see the attached characteristics list C/C 105, 1,000 cycles, 1kdischarge resistance, surge voltage applied Please see the attached characteristics list < LC 60, 90 to 95%RH, 500h, No-applied voltage Damp heat (Steady State) 14 M : 20 Rated voltage applied, after 5 minutes Equivalent series resistance (ESR) 12.5 10 to 470 120Hz/20 Leakage current 10 9.2 12 -55 to 105 120Hz/20 Rated capacitance range (F) Dissipation Factor (DF) Surface mount type RoHS compliance, Halogen free Low profile: 1.1mm (B1) Specifications Rated voltage Technical data Series Marking and dimensions Anode(+) W H Radial lead type S Catalog Deletion and EOL series POSCAP Line-up Explanation of part numbers Packing specifications Recommended soldering condition Fundamental structure haracteristics Reliability TPU TPH TPG Surface mount type TPSF TPE TPB TPC TPF TA TV TH TQC Catalog Deletion and EOL models 91 Rated capacitance 150 j 57 Lot. No.2 Rated voltage1 (unit : mm) W 2.8 4.3 0.2 H 1.1 1.9 0.1 S 0.8 1.3 0.2 W1 2.2 2.4 0.1 (unit : mm) b Selection guide Products list Technical data Image of case size L 3.5 7.3 Lot. No.2 Rated voltage1 W1 S 0.2 S7 j G 1 The rated voltage is as follows. R.V. Mark a c a b c Size code a 1.6 2.7 1.4 B1 2.4 2.9 3.7 D2 6.3 8.0 j k 10 12.5 A B 2 Lot.No.shows roughly manufacturing date. 3 The rated capacitance is as follows. Capacitance(F) 10 Mark A7 Recommended land pattern dimension of PWB Guidelines and precautions Series system diagram Size code B1 D2 D2size Rated capacitance3 Anode(+) B1size L 15 E7 22 J7 Size list F RV 10 15 22 33 47 68 100 150 330 6.3 B1 B1 D2 D2 D2 33 N7 47 S7 RV:Rated voltage 8.0 B1 D2 10.0 12.5 B1 B1 B1 D2 D2 OS-CON Line-up Guidelines and precautions TPC series characteristics list Size code Part number Selection guide Maximum allowable MSL LC ESR Rated Category Category Rated Rated DF A mmax ripple current Reflow Reflow voltage temperature capacitance voltage temperature mArms max temp. max/5min. 100kHz/20 100kHz1 <temp. () F V (V) 260 < 250 12.5 85 15 10 105 10 18.8 80 800 3 3 12TPC10M 12.5 85 10 10 105 10 12.5 80 800 3 3 8.0 85 22 6.3 105 10 17.6 70 1000 3 3 6TPC47MB 6.3 85 47 5.0 105 10 29.6 70 1000 3 3 6TPC47M 6.3 85 47 5.0 105 10 29.6 55 1100 3 3 B1 8TPC22M D2 12TPC15M 10TPC100M 10 105 100 10 105 10 100.0 45 1700 3 2a 10TPC68M 10 105 68 10 105 10 68.0 45 1700 3 2a 8TPC150M 8.0 105 150 8.0 105 10 120.0 40 1900 3 2a 6TPC330MA 6.3 85 330 5.0 105 10 207.9 40 1900 3 2a 6TPC150M 6.3 105 150 6.3 105 10 94.5 40 1900 3 2a 6TPC100M 6.3 105 100 6.3 105 10 63.0 45 1700 3 2a Technical data Surface mount type 1 100k500kHz,45 Radial lead type Catalog Deletion and EOL series POSCAP Line-up Technical data Selection guide Guidelines and precautions Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Recommended soldering condition Fundamental structure haracteristics Reliability TPU TPH TPG Surface mount type TPSF TPE TPB TPC TPF TA TV TH TQC Catalog Deletion and EOL models 92