The HPR1XXC Series uses advanced circuit design and packaging technology to deliver superior reliability and
performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are
reduced when using the HPR1XXC Series with high frequency isolation amplifiers.
Reduced parts count and high efficiency add to the reliability of the HPR1XXC Series. The high efficiency of the
HPR1XXC Series means less internal power dissipation, as low as 190mW.
With reduced heat dissipation the HPR1XXC Series can operate at higher temperatures with no degradation. In
addition, the high efficiency of the HPR1XXC Series means the series is able to offer greater than 10 W/inch3 of
output power density. Operation down to no load will not impact the reliability of the series, although a >1mA
minimum load is needed to realize published specifications.
The HPR1XXC Series provides the user a low cost converter without sacrificing reliability. The use of surface mounted
devices and advanced manufacturing technologies make it possible to offer premium performance and low cost.
SPECIFICATIONS All specifications are typical at TA = +25°C nominal input voltage unless otherwise specified.
FEATURES
n Low Cost
n
Multiple Package Styles
n Internal Input and Output
n Filtering
n
Non-Conductive Case
n
High Output Power Density:
10 Watts/Inch3
n Extended Temperature Range:
-25°C to +85°C
n Efficiency to 79%
n RoHS Compliant
PRODUCT SELECTION CHART
Model
Nominal Input
Voltage
Rated Output
Voltage
Rated Output
Current
Input Current Reflected Ripple
Current Efficiency Recommended Alternatives
No Load Rated Load
VDC VDC mA mA mAp-p %
HPR100C 5 5 150 20 216 10 69 NMR100C / MER1S0505SC
HPR101C 5 12 62 20 212 5 70 NMR101C / MER1S0512SC
HPR102C 5 15 50 20 212 5 71 NMR102C / MER1S0515SC
HPR103C 5 ±5 ±75 20 218 5 68 NMA0505SC / MEA1D0505SC
HPR104C 5 ±12 ±30 20 212 5 68 NMA0512SC / MEA1D0512SC
HPR105C 5 ±15 ±25 20 200 5 75 NMA0515SC / MEA1D0515SC
HPR106C 12 5 150 10 90 5 69 NMR106C / MER1S1205SC
HPR107C 12 12 62 10 81 5 77 NMR107C / MER1S1212SC
HPR110C 12 ±12 ±30 10 81 5 74 NMA1212SC / MEA1D1212SC
HPR111C 12 ±15 ±25 10 81 5 77 NMA1215SC / MEA1D1215SC
HPR112C 15 5 150 8 72 5 69 MER1S1505SC
HPR113C 15 12 62 8 72 5 69 MER1S1512SC
HPR116C 15 ±12 ±30 8 63 5 76 MEA1D1512SC
HPR117C 15 ±15 ±25 8 63 5 79 MEA1D1515SC
HPR118C 24 5 150 8 48 15 65 MER1S2405SC
HPR120C 24 15 50 8 45 15 76 MER1S2415SC
HPR122C 24 ±12 ±30 8 45 15 67 MEA1D2412SC
HPR123C 24 ±15 ±25 8 45 15 69 MEA1D2415SC
HPR108C 12 15 50 10 81 5 77 NMR108C / MER1S1215SC
HPR109C 12 ±5 ±75 10 88 5 71 NMA1205SC / MEA1D1205SC
HPR114C 15 15 50 8 72 5 69 MER1S1515SC
HPR115C 15 ±5 ±75 8 72 5 69 MEA1D1505SC
HPR119C 24 12 62 8 48 15 65 MER1S2412SC
HPR121C 24 ±5 ±75 8 45 15 69 MEA1D2405SC
As of October 2016, ONLY the following part numbers will be available: HPR100C; HPR105C; HPR107C; HPR116C;
HPR117C; HPR118C
HPR1XXC Series
0.75 Watt Single Output DC/DC Converters
TDC_HPR1xxC.E02 Page 1 of 4
www.murata-ps.com
www.murata-ps.com/support
For full details go to
www.murata-ps.com/rohs
The HPR1XXC devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected
to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this
time and temperature range, the integrity of the device’s plastic body will not be compromised and
internal temperatures within the converter will not exceed 175°C. Care should be taken to control
manual soldering limits identical to that of wave soldering.
SOLDERING INFORMATION
GENERAL OUTPUT INPUT
PARAMETER CONDITIONS MIN TYP MAX UNITS
INPUT
Voltage Range 4.5 5 5.5 VDC
10.8 12 13.2 VDC
13.5 15 16.5 VDC
21.6 24 26.4 VDC
Voltage Rise Time See Typical Performance Curves & Application Notes: “Capacitive Loading Effects on Start-Up of DC/DC Converters”
OUTPUT
Rated Power 750 mW
Voltage Setpoint Accuracy Rated Load, Nominal VIN ±5 %
Ripple & Noise BW = DC to 10MHz 150 200 mVp-p
BW =10Hz to 2MHz 30 40 mVrms
Voltage (Over Input Voltage Range)
1mA to Rated Current, VOUT = 5V 4.75 7 VDC
1mA to Rated Current, VOUT = 12V 11.40 15 VDC
1mA to Rated Current, VOUT = 15V 14.25 18 VDC
TemperatureCoefcent .01 .05 %/°C
REGULATION
Load Regulation (All other modes) Rated Load to 1mA Load 3 %
GENERAL
ISOLATION
Rated Voltage 750 VDC
Test Voltage 60 Hz, 10 Seconds 750 Vrms
Resistance 10 GW
Capacitance 25 100 pF
Leakage Current VISO= 240VAC, 60Hz 2 8.5 mArms
Switching Frequency 170 kHz
Frequency Change Over Line and Load 24 %
Package Weight 3 g
MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method
Ground Benign TA = +25°C 7.9 MHr
Fixed Ground TA = +35°C 1.9 MHr
Naval Sheltered TA = +35°C 1.2 MHr
Airborne Uninhabited Fighter TA = +35°C 300 kHr
TEMPERATURE
Specication -25 +25 +85 °C
Operation -40 +100 °C
Storage -40 +110 °C
SPECIFICATIONS, ALL MODELS
SpecicationsareatTA =+25°Cnominalinputvoltageunlessotherwisespecied.
HPR1XXC Series
0.75 Watt Single Output DC/DC Converters
TDC_HPR1xxC.E02 Page 2 of 4
www.murata-ps.com/support
VOUT VS LOAD
(5Vout Models) VOUT VS LOAD
(±5Vout Models) VOUT VS LOAD
(12Vout Models)
VOUT VS LOAD
(±12Vout Models) VOUT VS LOAD
(15Vout Models) VOUT VS LOAD
(±15Vout Models)
040 120 160
5.3
5.5
5.7
4.9
5.1
020406
080
11.9
12.0
12.1
12.2
12.3
12.4
020406080
4.6
4.8
5.0
5.2
5.4
010203040
12.0
12.1
12.2
12.3
12.4
12.5
14.9
15.1
15.3
15.5
15.7
15.9
0204060800
13.5
14.0
14.5
15.0
15.5
16.0
Vout
Vout
Vout
Vout
Vout
Vout F
requency (KHz)
80
Output Current (mA) Output Current each load (mA) Output Current each load (mA)
12.5
Output Current each load (mA)
12.6
Output Current each load (mA) Output Power each load (Watts)
0.2 0.4 0.6 0.8 1.0
16.5
040 80 100
60
20
90
75
60
45
30
15
0
EFFICIENCY VS LOAD
% of Rated Load (%)
Efficiency (%)
OSCILLATION FREQUENCY VS
TEMPERATURE
220
200
180
160
140
-30 0306090
Temperature (°C)
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(5 Vout models)
Total Load Capacitance (uF)
0 5 10 15 20 25 30 35 40 45 50
600
500
400
300
200
100
0
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
T
otal Load Capacitance (uF
)
0 5 10 15 20 25 30 35 40 45 50
90
80
70
60
50
40
30
20
10
0
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
Total Load Capacitance (uF)
0 5 10 15 20 25 30 35 40 45 50
60
50
40
30
20
10
0
NOTES:
1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the
output voltage of HPR1XXC devices is guaranteed to be within 95% of its steady-state value
within 100 milliseconds after the input voltage has reached 95% of its steady-state value.
2.) For dual output models, total load capacitance is the sum of the capacitances on the
plus and minus outputs.
SpecicationsareatTA = +25°C nominal input voltage and nominal load.
TYPICAL PERFORMANCE CURVES
SAFE OPERATING AREA
HPR1XXC Series
0.75 Watt Single Output DC/DC Converters
TDC_HPR1xxC.E02 Page 3 of 4
www.murata-ps.com/support
FRONT
VIEW
RIGHT
SIDE
VIEW
BOTTOM
VIEW
0.77+0.010"
(19.56+0.25)
0.02+0.002"
(0.51+0.05)
0.18+0.015"
(4.57+0.38)
0.140"
(3.56)
MIN
1 2 4 *5 6
0.397+0.010"
(10.16+0.25)
0.240+0.010"
(6.09+0.25)
0.020+0.010"
(0.51+0.25)
0.01+0.002"
(0.25+0.05)
0.035+0.015"
(0.89+0.38)
PIN CONNECTIONS
1. +VIN
2. -VIN
4. -VOUT
5. COM*
6. +VOUT
Notes:
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
MATERIAL: Lead material is phosphor bronze; lead
nishis100-300microinchesofmattetinoveranickel
barrier layer of 5-40 microinches.
*Common pin not present on single output models.
MECHANICAL
Internal Power Dissipation ........................................ 450mW
Short Circuit Duration ................................................ Momentary
ABSOLUTE MAXIMUM RATINGS
HPR 1XX C
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliant Version
ORDERING INFORMATION
“SIP” PACKAGE/PINOUT
HPR1XXC Series
0.75 Watt Single Output DC/DC Converters
TDC_HPR1xxC.E02 Page 4 of 4
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2017 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
