A Product Line of Diodes Incorporated FMMT560 500V PNP SILICON PLANAR HIGH VOLTAGE TRANSISTOR IN SOT23 Features and Benefits Mechanical Data * * * * * * * * * * * * BVCEO > -500V Maximum Continuous Collector Current IC = -150mA Excellent hFE Characteristics up to IC = 50mA Low Saturation Voltages Lead Free, RoHS Compliant (Note 1) Halogen and Antimony Free "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability * SOT23 Case: SOT23 UL Flammability Rating 94V-0 Case material: molded Plastic. Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish; Solderable per MIL-STD-202, Method 208 Weight: 0.008 grams (Approximate) C B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 3) Product FMMT560TA FMMT560TC Notes: Marking 560 560 Reel size (inches) 7 13 Tape width (mm) 8 8 Quantity per reel 3,000 10,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. Halogen and Antimony free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 3. For packaging details, go to our website at http://www.diodes.com. Marking Information 560 FMMT560 Document Number: DS33102 Rev. 4 - 2 560 = Product Type Marking Code 1 of 6 www.diodes.com March 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 Maximum Ratings @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value -500 -500 -5 -150 -500 Unit V V V mA mA Value 500 250 194 -55 to +150 Unit mW C/W C/W C Thermal Characteristics @TA = 25C unless otherwise specified Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: Symbol PD RJA RJL TJ, TSTG (Note 4) (Note 4) (Note 5) 4. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 5. Thermal resistance from junction to solder-point (at the end of the collector lead). Typical Thermal Characteristics 0.6 VCE(sat) Max Power Dissipation (W) -IC Collector Current (A) 1 Limit 100m DC 1s 100ms 10m 10ms 1ms 15 x 15mm FR4 1oz Copper 1m 1 100s 10 100 -VCE Collector-Emitter Voltage (V) 15 x 15mm FR4 1oz Copper 0.5 0.4 0.3 0.2 0.1 0.0 0 20 D=0.5 D=0.2 Single Pulse 40 0 100 D=0.05 D=0.1 1m 10m 100m 1 10 100 Pulse Width (s) 1k Max Power Dissipation (W) Thermal Resistance (C/W) 15 x 15mm FR4 1oz Copper 120 80 Document Number: DS33102 Rev. 4 - 2 100 120 140 160 15 x 15mm FR4 1oz Copper 100 10 1 0.1 100 Transient Thermal Impedance FMMT560 80 Derating Curve 200 160 60 Temperature (C) Safe Operating Area 240 40 2 of 6 www.diodes.com 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation March 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 Electrical Characteristics @TA = 25C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 6) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Symbol BVCBO BVCEO BVEBO ICBO IEBO Min -500 -500 -5 - Typ - Max -100 -100 Unit V V V nA nA Static Forward Current Transfer Ratio (Note 6) hFE 100 80 - 15 300 300 - - Collector-Emitter Saturation Voltage (Note 6) VCE(sat) - - Base-Emitter Saturation Voltage (Note 6) Base-Emitter Turn-On Voltage (Note 6) Output Capacitance VBE(sat) VBE(on) Cobo - - -200 -500 -0.9 -0.9 8 Transition Frequency fT 60 - - MHz Turn-On Time Turn-Off Time ton toff - 110 1.5 - ns s Notes: mV V V pF Test Condition IC = -100A IC = -10mA IE = -100A VCB = -500V VEB = -5V IC = -1mA, VCE = -10V IC = -50mA, VCE = -10V IC = -100mA, VCE = -10V IC = - 20mA, IB = -2mA IC = - 50mA, IB = -10mA IC = -50mA, IB = -10mA IC = -50mA, VCE = -10V VCB = -20V, f = 1MHz VCE = -20V, IC = -10mA, f = 50MHz VCE = -100V, IC = -50mA, IB1 = -5mA, IB2 = 10mA 6. Measured under pulsed conditions. Pulse width 300 s. Duty cycle 2% FMMT560 Document Number: DS33102 Rev. 4 - 2 3 of 6 www.diodes.com March 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 Typical Electrical Characteristics FMMT560 Document Number: DS33102 Rev. 4 - 2 4 of 6 www.diodes.com March 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 Package Outline Dimensions A B C H K M K1 D F J L G SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0 8 All Dimensions in mm Suggested Pad Layout Y Z C X FMMT560 Document Number: DS33102 Rev. 4 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 2.0 C 1.35 E E 5 of 6 www.diodes.com March 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2012, Diodes Incorporated www.diodes.com FMMT560 Document Number: DS33102 Rev. 4 - 2 6 of 6 www.diodes.com March 2012 (c) Diodes Incorporated