FMMT560
Document Number: DS33102 Rev. 4 - 2 1 of 6
www.diodes.com March 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
FMMT560
500V PNP SILICON PLANAR HIGH VOLTAGE TRANSISTOR IN SOT23
Features and Benefits
• BVCEO > -500V
• Maximum Continuous Collector Current IC = -150mA
• Excellent hFE Characteristics up to IC = 50mA
• Low Saturation Voltages
• Lead Free, RoHS Compliant (Note 1)
• Halogen and Antimony Free "Green" Device (Note 2)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: SOT23
• UL Flammability Rating 94V-0
• Case material: molded Plastic.
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish; Solderable per MIL-STD-202,
Method 208
• Weight: 0.008 grams (Approximate)
Ordering Information (Note 3)
Product Marking Reel size (inches) Tape width (mm) Quantity per reel
FMMT560TA 560 7 8 3,000
FMMT560TC 560 13 8 10,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
3. For packaging details, go to our website at http://www.diodes.com.
Marking Information
560 = Product Type Marking Code
C
E
B
Top View
SOT23
Device Symbol Top View
Pin-Out
560
FMMT560
Document Number: DS33102 Rev. 4 - 2 2 of 6
www.diodes.com March 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
FMMT560
Maximum Ratings @TA = 25°C unless otherwise specified
Characteristic Symbol Value Unit
Collector-Base Voltage VCBO -500 V
Collector-Emitter Voltage VCEO -500 V
Emitter-Base Voltage VEBO -5 V
Continuous Collector Current IC -150 mA
Peak Pulse Current ICM -500 mA
Thermal Characteristics @TA = 25°C unless otherwise specified
Characteristic Symbol Value Unit
Power Dissipation (Note 4) PD 500 mW
Thermal Resistance, Junction to Ambient (Note 4) RθJA 250 °C/W
Thermal Resistance, Junction to Lead (Note 5) RθJL 194 °C/W
Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C
Notes: 4. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured
when operating in a steady-state condition.
5. Thermal resistance from junctio n to solder-point (at the end of the collector lead).
Typical Thermal Characteristics
1 10 100
1m
10m
100m
1
15 x 1 5mm FR4
1oz Copper
VCE(sat)
Limit
100µs
1ms
10ms
100ms
1s
DC
Safe Op erating Area
-IC Collector Current (A)
-VCE Collector-Emitter Voltage (V) 0 20 40 60 80 100 120 140 160
0.0
0.1
0.2
0.3
0.4
0.5
0.6 15 x 15mm FR4 1oz Copper
Derating Curve
Temperature (°C)
Max Power Dissipation (W)
100µ 1m 10m 100m 1 10 100 1k
0
40
80
120
160
200
240 15 x 15mm FR4 1oz Copper
Transient Thermal Imped an ce
D=0.5
D=0.2
D=0.1
Single Pulse
D=0.05
Thermal Resistance (°C/W)
Pu l se Wid th (s ) 100µ 1m 10m 100m 1 10 100 1k
0.1
1
10
100 15 x 15mm FR4 1oz Copper
Pulse Power Dissipation
Puls e Width (s)
Max P o wer Di ssip ation (W)
FMMT560
Document Number: DS33102 Rev. 4 - 2 3 of 6
www.diodes.com March 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
FMMT560
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Collector-Base Breakdown Voltage BVCBO -500 - - V
IC = -100µA
Collector-Emitter Breakdown Voltage (Note 6) BVCEO -500 - - V
IC = -10mA
Emitter-Base Breakdown Voltage BVEBO -5 - - V
IE = -100µA
Collector Cutoff Current ICBO - - -100 nA
VCB = -500V
Emitter Cutoff Current IEBO - - -100 nA
VEB = -5V
Static Forward Current Transfer Ratio (Note 6) hFE 100
80
-
-
-
15
300
300
- - IC = -1mA, VCE = -10V
IC = -50mA, VCE = -10V
IC = -100mA, VCE = -10V
Collector-Emitter Saturation Voltage (Note 6) VCE(sat) - -
-200
-500 mV IC = - 20mA, IB = -2mA
IC = - 50mA, IB = -10mA
Base-Emitter Saturation Voltage (Note 6) VBE
(
sat
)
- - -0.9 V
IC = -50mA, IB = -10mA
Base-Emitter Turn-On Voltage (Note 6) VBE
(
on
)
- - -0.9 V
IC = -50mA, VCE = -10V
Output Capacitance Cobo - - 8 pF
VCB = -20V, f = 1MHz
Transition Frequency fT 60 - - MHz
VCE = -20V, IC = -10mA,
f = 50MHz
Turn-On Time ton - 110 - ns
VCE = -100V, IC = -50mA,
IB1 = -5mA, IB2 = 10mA
Turn-Off Time toff - 1.5 - µs
Notes: 6. Measured under pulsed conditions. Pulse width ≤ 300 µs. Duty cycle ≤ 2%
FMMT560
Document Number: DS33102 Rev. 4 - 2 4 of 6
www.diodes.com March 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
FMMT560
Typical Electrical Characteristics
FMMT560
Document Number: DS33102 Rev. 4 - 2 5 of 6
www.diodes.com March 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
FMMT560
Package Outline Dimensions
Suggested Pad Layout
SOT23
Dim Min Max Typ
A 0.37 0.51 0.40
B 1.20 1.40 1.30
C 2.30 2.50 2.40
D 0.89 1.03 0.915
F 0.45 0.60 0.535
G 1.78 2.05 1.83
H 2.80 3.00 2.90
J 0.013 0.10 0.05
K 0.903 1.10 1.00
K1 - - 0.400
L 0.45 0.61 0.55
M 0.085 0.18 0.11
α 0° 8° -
All Dimensions in mm
Dimensions Value (in mm)
Z 2.9
X 0.8
Y 0.9
C 2.0
E 1.35
A
M
JL
D
F
BC
H
K
G
K1
XE
Y
C
Z
FMMT560
Document Number: DS33102 Rev. 4 - 2 6 of 6
www.diodes.com March 2012
© Diodes Incorporated
A
Product Line o
f
Diodes Incorporated
FMMT560
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Cus tomer or user of this document or prod ucts described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the e xpress
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
