678D www.vishay.com Vishay Sprague Aluminum Capacitors 105 C, Miniature, Radial Lead FEATURES * Improved SMPS output capacitors * Highest ripple current ratings per case size Available * High CV * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 RIPPLE CURRENT MULTIPLIERS QUICK REFERENCE DATA DESCRIPTION TEMPERATURE VALUE Nominal case size O D x L in inches [mm] 0.394 x 0.472 [10.0 x 12.0] to 0.709 x 1.575 [18.0 x 40.0] AMBIENT TEMPERATURE +105 C 1.0 Operating temperature -55 C to +105 C +85 C 2.2 Rated capacitance range, CR 33 F to 6800 F +75 C 2.7 20 % +65 C 3.0 Tolerance on CR Rated voltage range, UR Termination Life validation test at 105 C Shelf life at 105 C DC leakage current Revision: 18-Jul-16 MULTIPLIERS 6.3 WVDC to 63 WVDC FREQUENCY (Hz) 2 and 3 radial leads and axial mount. WVDC 50 TO 60 100 TO 120 300 TO 400 1K TO 19K 20K TO 200K 4000 h (0.512" [13.0] diameter): 3000 h (0.394" [10.0] diameter): CAP 20 % (6.3 WVDC to 25 WVDC), 15 % (40 WVDC to 63 WVDC) from initial measurement. ESR 1.3 x initial specified limit. DCL 2 x initial specified limit. 1000 h: CAP 20 % (6.3 WVDC to 25 WVDC), 15 % (40 WVDC to 63 WVDC) from initial measurements. ESR 1.3 x initial specified limit. I = 0.01 CV (2 min charge time) I = 0.03 CV (1 min charge time) I in A, C in F, V in Volts 6.3 to 63 0.60 0.70 0.75 0.82 1.0 LOW TEMPERATURE PERFORMANCE CAPACITANCE RATIO C-55 C / C+25 C MINIMUM AT 120 Hz MAXIMUM CAPACITANCE CHANGE MAXIMUM IMPEDANCE CHANGE VOLTAGE MULTIPLIER 6.3 V to 16 V 0.75 25 V to 63 V 0.85 VOLTAGE MULTIPLIER 6.3 V to 16 V 2.0 25 V to 63 V 1.5 ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) NOMINAL DIAMETER TYPICAL ESL (nH) 0.394 [10.0] 0.512 [13.0] 0.630 [16.0] 0.709 [18.0] 4.0 7.0 10.0 12.0 Document Number: 42055 1 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D www.vishay.com Vishay Sprague BULK SPECIFICATIONS in millimeters TERMINAL CODE C TERMINAL CODE D 9.5 min. S W W L + + D 20 min. S L D - - 15 min. Sleeve Sleeve 7.1 min. TERMINAL CODE J (1) TERMINAL CODE O (2) 25 min. S W L S W T + D 9.5 1.6 25 min. + D - NC - NC 25 min. 5.0 1.6 Sleeve L Third lead may fall within 20 of CL Sleeve 7.1 1.6 Notes + Positive terminal - Negative terminal NC No charge potential (1) Available for 12.5 mm, 16 mm, and 18 mm diameter units (2) Available for 12.5 mm, 16 mm, and 18 mm diameter units with epoxy end-seal DIMENSIONS in inches [millimeters] NOMINAL CASE CODE D STYLES 2 AND 4 L D (max.) L (max.) STYLES 3 AND 5 D (max.) L (max.) LEAD SPACING S 0.024 [0.60] LEAD DIAMETER T 0.020 [0.50] NOMINAL AWG CC 0.394 [10.0] 0.512 [13.0] 0.413 [10.5] 0.563 [14.3] 0.413 [10.5] 0.630 [16.0] 0.197 [5.0] n/a 0.025 [0.63] 22 CD 0.394 [10.0] 0.630 [16.0] 0.413 [10.5] 0.669 [17.0] 0.413 [10.5] 0.740 [18.8] 0.197 [5.0] n/a 0.025 [0.63] 22 CG 0.394 [10.0] 0.787 [20.0] 0.413 [10.5] 0.846 [21.5] 0.413 [10.5] 0.906 [23.0] 0.197 [5.0] n/a 0.025 [0.63] 22 DG 0.492 [12.5] 0.787 [20.0] 0.512 [13.0] 0.846 [21.5] 0.512 [13.0] 0.906 [23.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 DK 0.492 [12.5] 0.984 [25.0] 0.512 [13.0] 1.043 [26.5] 0.512 [13.0] 1.142 [29.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 DM 0.492 [12.5] 1.043 [26.5] 0.512 [13.0] 1.102 [28.0] 0.512 [13.0] 1.161 [29.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 DT 0.492 [12.5] 1.319 [33.5] 0.512 [13.0] 1.346 [34.2] 0.512 [13.0] 1.417 [36.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 DS 0.492 [12.5] 1.673 [42.5] 0.512 [13.0] 1.720 [43.7] 0.512 [13.0] 1.791 [45.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 EK 0.630 [16.0] 0.984 [25.0] 0.650 [16.5] 1.031 [26.2] 0.650 [16.5] 1.098 [27.9] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 EN 0.630 [16.0] 1.260 [32.0] 0.650 [16.5] 1.319 [33.5] 0.650 [16.5] 1.417 [36.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 ER 0.630 [16.0] 1.417 [36.0] 0.650 [16.5] 1.476 [37.5] 0.650 [16.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 EU 0.630 [16.0] 1.575 [40.0] 0.650 [16.5] 1.642 [41.7] 0.650 [16.5] 1.669 [42.4] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 FR 0.709 [18.0] 1.417 [36.0] 0.728 [18.5] 1.476 [37.5] 0.728 [18.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 FV 0.709 [18.0] 1.575 [40.0] 0.728 [18.5] 1.653 [42.0] 0.728 [18.5] 1.693 [43.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 Revision: 18-Jul-16 Document Number: 42055 2 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D www.vishay.com Vishay Sprague TAPE AND REEL, SPECIFICATIONS TO EIA-468D in inches [millimeters] Formed Leads P K H H0 F W0 W L1 P0 d D0 DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES CASE SIZE F LEAD SPACING STD. QTY/REEL 0.236 x 0.453 [6.0 x 11.0] 0.197 [5.0] 800 0.315 x 0.472 [8.0 x 12.0] 0.197 [5.0] 700 Unformed (Straight) Leads P H F W0 W L1 P0 d D0 f DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES CASE SIZE F LEAD SPACING STD. QTY/REEL 0.236 x 0.453 [6.0 x 11.0] 0.098 [2.5] 800 0.315 x 0.472 [8.0 x 12.0] 0.140 (1) [3.5] 700 0.394 x 0.512 [10.0 x 13.0] 0.197 [5.0] 500 0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 500 0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 500 Note (3) Available as special order. Revision: 18-Jul-16 Document Number: 42055 3 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] ITEM d - Lead-wire diameter P - Pitch of component P0 - Feed hole pitch F - Lead-to-lead distance K - Clinch height H - Height of component from tape center H0 - Lead-wire clinch height W - Tape width W0 - Hold down tape width D0 - Feed hole diameter t - Total tape thickness L1 - Maximum lead protrusion 0.236 x 0.433 [6.0 x 11.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] 0.098 [2.5] 0.728 [18.5] 0.630 [16.0] 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] CASE SIZE (DIAMETER x LENGTH) 0.315 x 0.472 0.394 x 0.512 0.394 x 0.630 [8.0 x 12.0] [10.0 x 13.0] [10.0 x 16.0] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.157 [4.0] n/a n/a 0.787 [20.0] 0.906 [23.0] 0.906 [23.0] 0.630 [16.0] n/a n/a 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.394 x 0.787 [10.0 x 20.0] 0.025 [0.63] 0.500 [12.7] 0.500 [12.7] 0.197 [5.0] n/a 0.906 [23.0] n/a 0.709 [18.0] 0.591 [15.0] 0.157 [4.0] 0.028 [0.7] 0.118 [3.0] Note * Terminal code "I" = tape and reel. Terminal code "+" = tape and ammo. Positive leader is standard. Negative leader is available by special order. ORDERING EXAMPLE Electrolytic capacitor 678D series: 678D 108 M 6R3 DG 3 D DESCRIPTION CODE 678D 108 M 6R3 DG 3 D EXPLANATION Product type Capacitance value (1000 F) Tolerance (M = 20 %) Voltage rating at 105 C (6R3 = 6.3 V) Can size (see Dimensions table) Sleeve and sealing (3 = P.V.C. sleeve w/epoxy end seal) Terminal code / packaging (D = bulk; straight leads) Note * For lead (Pb)-free / RoHS compliant products add suffix "E3" to part number. Example: 678D108M6R3DG3DE3 ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (F) PART NUMBER 330.0 470.0 1000.0 2200.0 3300.0 4700.0 678D337M6R3CC3D 678D477M6R3CD3D 678D108M6R3DG3D 678D228M6R3EK3D 678D338M6R3DS3D 678D478M6R3FR3D 330.0 470.0 1000.0 2200.0 3300.0 4700.0 678D337M010CD3D 678D477M010CG3D 678D108M010DM3D 678D228M010EK3D 678D338M010EN3D 678D487M010FR3D Revision: 18-Jul-16 NOMINAL CASE SIZE DxL MAX. ESR AT +25 C () 20 Hz 6.3 WVDC at 105 C, SURGE = 9 V 0.394 x 0.512 [10.0 x 13.0] 0.540 0.394 x 0.630 [10.0 x 16.0] 0.340 0.492 x 0.787 [12.5 x 20.0] 0.200 0.630 x 0.984 [16.0 x 25.0] 0.110 0.492 x 1.673 [12.5 x 42.5] 0.067 0.709 x 1.417 [18.0 x 36.0] 0.066 10 WVDC AT 105 C, SURGE = 13 V 0.394 x 0.630 [10.0 x 16.0] 0.350 0.394 x 0.787 [10.0 x 20.0] 0.235 0.492 x 1.043 [12.5 x 26.5] 0.120 0.630 x 0.984 [16.0 x 25.0] 0.115 0.630 x 1.260 [16.0 x 32.0] 0.085 0.709 x 1.417 [18.0 x 36.0] 0.070 MAX. RIPPLE AT +105 C (A) 20 kHz 20 kHz to 100 kHz MAX. IMPEDANCE AT +25 C () 100 kHz 0.213 0.133 0.071 0.041 0.031 0.029 0.36 0.49 0.83 1.36 1.67 2.02 0.213 0.132 0.070 0.045 0.032 0.031 0.135 0.092 0.062 0.042 0.038 0.031 0.46 0.63 0.98 1.52 1.56 1.97 0.134 0.090 0.061 0.046 0.041 0.033 Document Number: 42055 4 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 678D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION NOMINAL CASE SIZE DxL MAX. ESR AT +25 C () MAX. RIPPLE AT +105 C (A) MAX. IMPEDANCE AT +25 C () 100 kHz CAPACITANCE (F) PART NUMBER 220.0 678D227M016CC3D 0.394 x 0.512 [10.0 x 13.0] 0.585 0.217 0.40 0.217 330.0 678D337M016CD3D 0.394 x 0.630 [10.0 x 16.0] 0.370 0.137 0.52 0.136 20 Hz 20 kHz 20 kHz to 100 kHz 16 WVDC AT 105 C, SURGE = 20 V 470.0 678D477M016CG3D 0.394 x 0.787 [10.0 x 20.0] 0.250 0.098 0.70 0.094 1000.0 678D108M016DM3D 0.492 x 1.043 [12.5 x 26.5] 0.130 0.066 1.00 0.065 2200.0 678D228M016ER3D 0.630 x 1.417 [16.0 x 36.0] 0.074 0.032 1.78 0.034 3300.0 678D338M016FR3D 0.709 x 1.417 [18.0 x 36.0] 0.074 0.032 1.94 0.034 220.0 678D227M020CD3D 0.394 x 0.630 [10.0 x 16.0] 0.380 0.150 0.41 0.148 330.0 678D337M020CG3D 0.394 x 0.787 [10.0 x 20.0] 0.270 0.100 0.61 0.098 470.0 678D477M020DG3D 0.492 x 0.787 [12.5 x 20.0] 0.250 0.077 0.45 0.075 1000.0 678D108M020DT3D 0.492 x 1.280 [12.5 x 33.5] 0.115 0.048 0.78 0.045 2200.0 678D228M020ER3D 0.630 x 1.417 [16.0 x 36.0] 0.077 0.032 1.80 0.034 3300.0 678D338M020FV3D 0.709 x 1.575 [18.0 x 40.0] 0.061 0.026 2.25 0.028 0.250 20 WVDC AT 105 C, SURGE = 30 V 25 WVDC AT 105 C, SURGE = 35 V 100.0 678D107M025CC3D 0.394 x 0.512 [10.0 x 13.0] 0.700 0.250 0.32 220.0 678D227M025CG3D 0.394 x 0.787 [10.0 x 20.0] 0.300 0.105 0.59 0.100 330.0 678D337M025DG3D 0.492 x 0.787 [12.5 x 20.0] 0.270 0.078 0.79 0.076 0.068 470.0 678D477M025DM3D 0.492 x 1.043 [12.5 x 26.5] 0.160 0.067 0.97 1000.0 678D108M025DS3D 0.492 x 1.673 [12.5 x 42.5] 0.090 0.034 1.60 0.036 2200.0 678D228M025FV3D 0.709 x 1.575 [18.0 x 40.0] 0.062 0.026 2.22 0.028 47.0 678D476M040CC3D 0.394 x 0.512 [10.0 x 13.0] 0.265 0.28 0.265 40 WVDC AT 105 C, SURGE = 55 V 0.950 100.0 678D107M040CD3D 0.394 x 0.630 [10.0 x 16.0] 0.580 0.165 0.38 0.165 330.0 678D337M040DM3D 0.492 x 1.043 [12.5 x 26.5] 0.200 0.068 0.93 0.070 470.0 678D477M040EK3D 0.630 x 0.984 [16.0 x 25.0] 0.133 0.046 1.28 0.050 1000.0 678D108M040ER3D 0.630 x 1.417 [16.0 x 36.0] 0.080 0.033 1.76 0.035 0.275 50 WVDC AT 105 C, SURGE = 75 V 47.0 678D476M050CC3D 0.394 x 0.512 [10.0 x 13.0] 1.250 0.275 0.28 100.0 678D107M050CG3D 0.394 x 0.787 [10.0 x 20.0] 0.520 0.115 0.57 0.112 220.0 678D227M050DM3D 0.472 x 1.043 [12.5 x 26.5] 0.240 0.069 0.93 0.071 330.0 678D337M050EK3D 0.630 x 0.984 [16.0 x 25.0] 0.150 0.048 1.26 0.052 470.0 678D477M050DS3D 0.492 x 1.673 [12.5 x 42.5] 0.110 0.036 1.55 0.039 1000.0 678D108M050FV3D 0.709 x 1.575 [18.0 x 40.0] 0.077 0.028 2.15 0.032 33.0 678D336M063CC3D 0.394 x 0.512 [10.0 x 13.0] 1.600 0.288 0.27 0.288 47.0 678D476M063CD3D 0.394 x 0.630 [10.0 x 16.0] 1.000 0.180 0.37 0.180 100.0 678D107M063DG3D 0.492 x 0.787 [12.5 x 20.0] 0.450 0.093 0.72 0.090 220.0 678D227M063DT3D 0.492 x 1.280 [12.5 x 33.5] 0.160 0.055 1.10 0.054 220.0 678D227M063EK3D 0.630 x 0.984 [16.0 x 25.0] 0.170 0.050 1.23 0.054 330.0 678D337M063DS3D 0.492 x 1.673 [12.5 x 42.5] 0.130 0.038 1.51 0.040 470.0 678D477M063ER3D 0.630 x 1.417 [16.0 x 36.0] 0.120 0.035 1.70 0.038 63 WVDC AT 105 C, SURGE = 80 V Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 18-Jul-16 Document Number: 42055 5 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 678D477M063ER5J 678D107M063DG5J 678D278M7R5EK5J 678D117H050DG5J 678D667H010DG5J 678D257H050DM5J 678D108M050FV5J 678D337M040DM3J 678D227M050DM4J 678D337M025DG4J 678D687M020DM4J 678D107M025CC4D 678D107M040CD4D 678D107M050CG4D 678D107M063DG4D 678D158M6R3DM4D 678D228M010EK4D 678D228M016ER4D 678D337M025DG4D 678D337M040DM4D 678D337M063EK4D 678D337M063EK4O 678D337M063EN4D 678D108M040ER4D 678D108M050FV4D 678D128M016DM4D 678D227M025CG4D 678D227M050DM4D 678D227M063EK4AD377 678D227M063EK4D 678D277M035DG4D 678D336M063CC4D 678D476M063CD4D 678D687M063FV4D 678D687M063FV4MSR99 678D337M010CD4D 678D337M020CG4D 678D476M040CC4D 678D476M050CC4D 678D338M016FR4D 678D338M020FV4D 678D477M040EK4D 678D477M016CG4D 678D826M035CC4D 678D337M063DS3D 678D477M040EK3D 678D228M025FV3D 678D227M050DM3D 678D227M025CG5D 678D827M016DM5D 678D108M016EK3D 678D337M010CD3D 678D108M016DM5D 678D227M016CC3D 678D227M016CC3I 678D107M050CG5D 678D107M063DG3O 678D158M010DK3D 678D227M050DM5D 678D337H010CD5DD467 678D338M016EN50 678D338M016EN5O 678D377 678D440 678D478M010FR5O 678D227M025CG3D 678D397M040DT5D 678D228M016ER3D 678D477M020DG3D 678D336M063CC3D 678D476M040CC3D 678D337M025DG3D 678D108M025DS3D 678D107M063DG5D 678D397M016CD3D 678D476M063CD3D 678D477M025DG4D 678D337M063EN3D 678D477M025DM3D 678D167H040DG5J 678D687M040DS3D 678D107M050CG3D 678D228M010EK3D 678D568M010FV3O 678D476M050CC3D 678D108M016DM3D 678D108M050FV3D 678D227M063DT3D 678D227M063EK3D 678D477M016CG5D 678D337M040DM3D 678D107M025CC3D 678D107M040CD3D 678D476M063CC4D 678D227M020CD3D 678D337M063EN5J 678D108M010DM3D 678D337M063EN5D 678D107M040CD3DE3 678D127M025CC4D