678D108M016DM5D - Vishay / Sprague

678D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 1Document Number: 42055

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Capacitors

105 °C, Miniature, Radial Lead

FEATURES

• Improved SMPS output capacitors

• Highest ripple current ratings per case size

• High CV

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

DESCRIPTION VALUE

Nominal case size 

Ø D x L in inches [mm]

0.394 x 0.472 [10.0 x 12.0]

to 0.709 x 1.575 [18.0 x 40.0]

Operating temperature -55 °C to +105 °C

Rated capacitance range, CR33 μF to 6800 μF

Tolerance on CR± 20 %

Rated voltage range, UR6.3 WVDC to 63 WVDC

Termination 2 and 3 radial leads and axial

mount.

Life validation test at 105 °C

4000 h (0.512" [13.0] diameter):

3000 h (0.394" [10.0] diameter):

CAP  20 % (6.3 WVDC to

25 WVDC),

 15 % (40 WVDC to 63 WVDC)

from initial measurement.

ESR  1.3 x initial

specified limit.

DCL  2 x initial specified limit.

Shelf life at 105 °C

1000 h: CAP  20 %

(6.3 WVDC to 25 WVDC),

 15 % (40 WVDC to 63 WVDC)

from initial measurements.

ESR  1.3 x initial

specified limit.

DC leakage current

I = 0.01 CV (2 min charge time)

I = 0.03 CV (1 min charge time)

I in μA, C in μF, V in Volts

RIPPLE CURRENT MULTIPLIERS

TEMPERATURE

AMBIENT TEMPERATURE MULTIPLIERS

+105 °C 1.0

+85 °C 2.2

+75 °C 2.7



+65 °C 3.0

FREQUENCY (Hz)

50 TO 60 100 TO 120 300 TO 400 1K TO 19K 20K TO 200K

6.3 to 63 0.60 0.70 0.75 0.82 1.0

LOW TEMPERATURE PERFORMANCE

CAPACITANCE RATIO C-55 °C / C+25 °C MINIMUM AT 120 Hz

MAXIMUM 

CAPACITANCE 

CHANGE

VOLTAGE MULTIPLIER

6.3 V to 16 V 0.75

25 V to 63 V 0.85

MAXIMUM 

IMPEDANCE

CHANGE

VOLTAGE MULTIPLIER

6.3 V to 16 V 2.0

25 V to 63 V 1.5

ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz)

NOMINAL

DIAMETER

0.394

[10.0]

0.512

[13.0]

0.630

[16.0]

0.709

[18.0]

TYPICAL ESL (nH) 4.0 7.0 10.0 12.0

Available

678D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 2Document Number: 42055

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

BULK SPECIFICATIONS in millimeters

TERMINAL CODE C

TERMINAL CODE J (1)

TERMINAL CODE D

TERMINAL CODE O (2)

Notes

Positive terminal

Negative terminal

No charge potential

(1) Available for 12.5 mm, 16 mm, and 18 mm diameter units

(2) Available for 12.5 mm, 16 mm, and 18 mm diameter units with epoxy end-seal

7.1 min.

Sleeve

9.5 min.

L25 min.25 min.

25 min.

-NC

Sleeve

15 min.

20 min. L

Sleeve

7.1 ± 1.6

5.0 ± 1.6

9.5 ± 1.6

Third lead may fall

within ± 20° of C

Sleeve

DIMENSIONS in inches [millimeters]

CASE

CODE

NOMINAL STYLES 2 AND 4 STYLES 3 AND 5 LEAD SPACING LEAD DIAMETER

D L D (max.) L (max.) D (max.) L (max.) S ± 0.024

[0.60]

T ± 0.020

[0.50] NOMINAL AWG

CC 0.394 [10.0] 0.512 [13.0] 0.413 [10.5] 0.563 [14.3] 0.413 [10.5] 0.630 [16.0] 0.197 [5.0] n/a 0.025 [0.63] 22

CD 0.394 [10.0] 0.630 [16.0] 0.413 [10.5] 0.669 [17.0] 0.413 [10.5] 0.740 [18.8] 0.197 [5.0] n/a 0.025 [0.63] 22

CG 0.394 [10.0] 0.787 [20.0] 0.413 [10.5] 0.846 [21.5] 0.413 [10.5] 0.906 [23.0] 0.197 [5.0] n/a 0.025 [0.63] 22

DG 0.492 [12.5] 0.787 [20.0] 0.512 [13.0] 0.846 [21.5] 0.512 [13.0] 0.906 [23.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DK 0.492 [12.5] 0.984 [25.0] 0.512 [13.0] 1.043 [26.5] 0.512 [13.0] 1.142 [29.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DM 0.492 [12.5] 1.043 [26.5] 0.512 [13.0] 1.102 [28.0] 0.512 [13.0] 1.161 [29.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DT 0.492 [12.5] 1.319 [33.5] 0.512 [13.0] 1.346 [34.2] 0.512 [13.0] 1.417 [36.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DS 0.492 [12.5] 1.673 [42.5] 0.512 [13.0] 1.720 [43.7] 0.512 [13.0] 1.791 [45.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

EK 0.630 [16.0] 0.984 [25.0] 0.650 [16.5] 1.031 [26.2] 0.650 [16.5] 1.098 [27.9] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

EN 0.630 [16.0] 1.260 [32.0] 0.650 [16.5] 1.319 [33.5] 0.650 [16.5] 1.417 [36.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

ER 0.630 [16.0] 1.417 [36.0] 0.650 [16.5] 1.476 [37.5] 0.650 [16.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

EU 0.630 [16.0] 1.575 [40.0] 0.650 [16.5] 1.642 [41.7] 0.650 [16.5] 1.669 [42.4] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

FR 0.709 [18.0] 1.417 [36.0] 0.728 [18.5] 1.476 [37.5] 0.728 [18.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

FV 0.709 [18.0] 1.575 [40.0] 0.728 [18.5] 1.653 [42.0] 0.728 [18.5] 1.693 [43.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

678D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 3Document Number: 42055

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TAPE AND REEL, SPECIFICATIONS TO EIA-468D in inches [millimeters]

Formed Leads

Unformed (Straight) Leads

Note

(3) Available as special order.

DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES

CASE SIZE F LEAD SPACING STD. QTY/REEL

0.236 x 0.453 [6.0 x 11.0] 0.197 [5.0] 800

0.315 x 0.472 [8.0 x 12.0] 0.197 [5.0] 700

DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES

CASE SIZE F LEAD SPACING STD. QTY/REEL

0.236 x 0.453 [6.0 x 11.0] 0.098 [2.5] 800

0.315 x 0.472 [8.0 x 12.0] 0.140 (1) [3.5] 700

0.394 x 0.512 [10.0 x 13.0] 0.197 [5.0] 500

0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 500

0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 500

P0d

W0W

678D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 4Document Number: 42055

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Terminal code “I” = tape and reel. Terminal code “+” = tape and ammo. 

Positive leader is standard. Negative leader is available by special order.

ORDERING EXAMPLE

Electrolytic capacitor 678D series: 678D 108 M 6R3 DG 3 D

Note

• For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.

Example: 678D108M6R3DG3DE3

DIMENSIONS in inches [millimeters]

ITEM

CASE SIZE (DIAMETER x LENGTH)

0.236 x 0.433

[6.0 x 11.0]

0.315 x 0.472

[8.0 x 12.0]

0.394 x 0.512

[10.0 x 13.0]

0.394 x 0.630

[10.0 x 16.0]

0.394 x 0.787

[10.0 x 20.0]

d - Lead-wire diameter 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63]

P - Pitch of component 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7]

P0 - Feed hole pitch 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7]

F - Lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0]

K - Clinch height 0.098 [2.5] 0.157 [4.0] n/a n/a n/a

H - Height of component from tape center 0.728 [18.5] 0.787 [20.0] 0.906 [23.0] 0.906 [23.0] 0.906 [23.0]

H0 - Lead-wire clinch height 0.630 [16.0] 0.630 [16.0] n/a n/a n/a

W - Tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0]

W0 - Hold down tape width 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0]

D0 - Feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0]

t - Total tape thickness 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7]

L1 - Maximum lead protrusion 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0]

DESCRIPTION

CODE EXPLANATION

678D Product type

108 Capacitance value (1000 μF)

M Tolerance (M = ± 20 %)

6R3 Voltage rating at 105 °C (6R3 = 6.3 V)

DG Can size (see Dimensions table)

3 Sleeve and sealing (3 = P.V.C. sleeve w/epoxy end seal)

D Terminal code / packaging (D = bulk; straight leads)

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. ESR

AT +25 °C ()

MAX. RIPPLE

AT +105 °C (A)

MAX.

IMPEDANCE

AT +25 °C ()

100 kHz

20 Hz 20 kHz 20 kHz to 100 kHz

6.3 WVDC at 105 °C, SURGE = 9 V

330.0 678D337M6R3CC3D 0.394 x 0.512 [10.0 x 13.0] 0.540 0.213 0.36 0.213

470.0 678D477M6R3CD3D 0.394 x 0.630 [10.0 x 16.0] 0.340 0.133 0.49 0.132

1000.0 678D108M6R3DG3D 0.492 x 0.787 [12.5 x 20.0] 0.200 0.071 0.83 0.070

2200.0 678D228M6R3EK3D 0.630 x 0.984 [16.0 x 25.0] 0.110 0.041 1.36 0.045

3300.0 678D338M6R3DS3D 0.492 x 1.673 [12.5 x 42.5] 0.067 0.031 1.67 0.032

4700.0 678D478M6R3FR3D 0.709 x 1.417 [18.0 x 36.0] 0.066 0.029 2.02 0.031

10 WVDC AT 105 °C, SURGE = 13 V

330.0 678D337M010CD3D 0.394 x 0.630 [10.0 x 16.0] 0.350 0.135 0.46 0.134

470.0 678D477M010CG3D 0.394 x 0.787 [10.0 x 20.0] 0.235 0.092 0.63 0.090

1000.0 678D108M010DM3D 0.492 x 1.043 [12.5 x 26.5] 0.120 0.062 0.98 0.061

2200.0 678D228M010EK3D 0.630 x 0.984 [16.0 x 25.0] 0.115 0.042 1.52 0.046

3300.0 678D338M010EN3D 0.630 x 1.260 [16.0 x 32.0] 0.085 0.038 1.56 0.041

4700.0 678D487M010FR3D 0.709 x 1.417 [18.0 x 36.0] 0.070 0.031 1.97 0.033

678D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 5Document Number: 42055

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the

lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.

16 WVDC AT 105 °C, SURGE = 20 V

220.0 678D227M016CC3D 0.394 x 0.512 [10.0 x 13.0] 0.585 0.217 0.40 0.217

330.0 678D337M016CD3D 0.394 x 0.630 [10.0 x 16.0] 0.370 0.137 0.52 0.136

470.0 678D477M016CG3D 0.394 x 0.787 [10.0 x 20.0] 0.250 0.098 0.70 0.094

1000.0 678D108M016DM3D 0.492 x 1.043 [12.5 x 26.5] 0.130 0.066 1.00 0.065

2200.0 678D228M016ER3D 0.630 x 1.417 [16.0 x 36.0] 0.074 0.032 1.78 0.034

3300.0 678D338M016FR3D 0.709 x 1.417 [18.0 x 36.0] 0.074 0.032 1.94 0.034

20 WVDC AT 105 °C, SURGE = 30 V

220.0 678D227M020CD3D 0.394 x 0.630 [10.0 x 16.0] 0.380 0.150 0.41 0.148

330.0 678D337M020CG3D 0.394 x 0.787 [10.0 x 20.0] 0.270 0.100 0.61 0.098

470.0 678D477M020DG3D 0.492 x 0.787 [12.5 x 20.0] 0.250 0.077 0.45 0.075

1000.0 678D108M020DT3D 0.492 x 1.280 [12.5 x 33.5] 0.115 0.048 0.78 0.045

2200.0 678D228M020ER3D 0.630 x 1.417 [16.0 x 36.0] 0.077 0.032 1.80 0.034

3300.0 678D338M020FV3D 0.709 x 1.575 [18.0 x 40.0] 0.061 0.026 2.25 0.028

25 WVDC AT 105 °C, SURGE = 35 V

100.0 678D107M025CC3D 0.394 x 0.512 [10.0 x 13.0] 0.700 0.250 0.32 0.250

220.0 678D227M025CG3D 0.394 x 0.787 [10.0 x 20.0] 0.300 0.105 0.59 0.100

330.0 678D337M025DG3D 0.492 x 0.787 [12.5 x 20.0] 0.270 0.078 0.79 0.076

470.0 678D477M025DM3D 0.492 x 1.043 [12.5 x 26.5] 0.160 0.067 0.97 0.068

1000.0 678D108M025DS3D 0.492 x 1.673 [12.5 x 42.5] 0.090 0.034 1.60 0.036

2200.0 678D228M025FV3D 0.709 x 1.575 [18.0 x 40.0] 0.062 0.026 2.22 0.028

40 WVDC AT 105 °C, SURGE = 55 V

47.0 678D476M040CC3D 0.394 x 0.512 [10.0 x 13.0] 0.950 0.265 0.28 0.265

100.0 678D107M040CD3D 0.394 x 0.630 [10.0 x 16.0] 0.580 0.165 0.38 0.165

330.0 678D337M040DM3D 0.492 x 1.043 [12.5 x 26.5] 0.200 0.068 0.93 0.070

470.0 678D477M040EK3D 0.630 x 0.984 [16.0 x 25.0] 0.133 0.046 1.28 0.050

1000.0 678D108M040ER3D 0.630 x 1.417 [16.0 x 36.0] 0.080 0.033 1.76 0.035

50 WVDC AT 105 °C, SURGE = 75 V

47.0 678D476M050CC3D 0.394 x 0.512 [10.0 x 13.0] 1.250 0.275 0.28 0.275

100.0 678D107M050CG3D 0.394 x 0.787 [10.0 x 20.0] 0.520 0.115 0.57 0.112

220.0 678D227M050DM3D 0.472 x 1.043 [12.5 x 26.5] 0.240 0.069 0.93 0.071

330.0 678D337M050EK3D 0.630 x 0.984 [16.0 x 25.0] 0.150 0.048 1.26 0.052

470.0 678D477M050DS3D 0.492 x 1.673 [12.5 x 42.5] 0.110 0.036 1.55 0.039

1000.0 678D108M050FV3D 0.709 x 1.575 [18.0 x 40.0] 0.077 0.028 2.15 0.032

63 WVDC AT 105 °C, SURGE = 80 V

33.0 678D336M063CC3D 0.394 x 0.512 [10.0 x 13.0] 1.600 0.288 0.27 0.288

47.0 678D476M063CD3D 0.394 x 0.630 [10.0 x 16.0] 1.000 0.180 0.37 0.180

100.0 678D107M063DG3D 0.492 x 0.787 [12.5 x 20.0] 0.450 0.093 0.72 0.090

220.0 678D227M063DT3D 0.492 x 1.280 [12.5 x 33.5] 0.160 0.055 1.10 0.054

220.0 678D227M063EK3D 0.630 x 0.984 [16.0 x 25.0] 0.170 0.050 1.23 0.054

330.0 678D337M063DS3D 0.492 x 1.673 [12.5 x 42.5] 0.130 0.038 1.51 0.040

470.0 678D477M063ER3D 0.630 x 1.417 [16.0 x 36.0] 0.120 0.035 1.70 0.038

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. ESR

AT +25 °C ()

MAX. RIPPLE

AT +105 °C (A)

MAX.

IMPEDANCE

AT +25 °C ()

100 kHz

20 Hz 20 kHz 20 kHz to 100 kHz

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

678D477M063ER5J 678D107M063DG5J 678D278M7R5EK5J 678D117H050DG5J 678D667H010DG5J

678D257H050DM5J 678D108M050FV5J 678D337M040DM3J 678D227M050DM4J 678D337M025DG4J

678D687M020DM4J 678D107M025CC4D 678D107M040CD4D 678D107M050CG4D 678D107M063DG4D

678D158M6R3DM4D 678D228M010EK4D 678D228M016ER4D 678D337M025DG4D 678D337M040DM4D

678D337M063EK4D 678D337M063EK4O 678D337M063EN4D 678D108M040ER4D 678D108M050FV4D

678D128M016DM4D 678D227M025CG4D 678D227M050DM4D 678D227M063EK4AD377 678D227M063EK4D

678D277M035DG4D 678D336M063CC4D 678D476M063CD4D 678D687M063FV4D 678D687M063FV4MSR99

678D337M010CD4D 678D337M020CG4D 678D476M040CC4D 678D476M050CC4D 678D338M016FR4D

678D338M020FV4D 678D477M040EK4D 678D477M016CG4D 678D826M035CC4D 678D337M063DS3D

678D477M040EK3D 678D228M025FV3D 678D227M050DM3D 678D227M025CG5D 678D827M016DM5D

678D108M016EK3D 678D337M010CD3D 678D108M016DM5D 678D227M016CC3D 678D227M016CC3I

678D107M050CG5D 678D107M063DG3O 678D158M010DK3D 678D227M050DM5D 678D337H010CD5DD467

678D338M016EN50 678D338M016EN5O 678D377 678D440 678D478M010FR5O 678D227M025CG3D

678D397M040DT5D 678D228M016ER3D 678D477M020DG3D 678D336M063CC3D 678D476M040CC3D

678D337M025DG3D 678D108M025DS3D 678D107M063DG5D 678D397M016CD3D 678D476M063CD3D

678D477M025DG4D 678D337M063EN3D 678D477M025DM3D 678D167H040DG5J 678D687M040DS3D

678D107M050CG3D 678D228M010EK3D 678D568M010FV3O 678D476M050CC3D 678D108M016DM3D

678D108M050FV3D 678D227M063DT3D 678D227M063EK3D 678D477M016CG5D 678D337M040DM3D

678D107M025CC3D 678D107M040CD3D 678D476M063CC4D 678D227M020CD3D 678D337M063EN5J

678D108M010DM3D 678D337M063EN5D 678D107M040CD3DE3 678D127M025CC4D