SB01-15CP
No.1929-1/3
Applications
High frequency rectification (switching regulators, converters, choppers).
Features
Low forward voltage (VF max=0.75V).
Fast reverse recorvery time (trr max=10ns).
Low switching noise.
Low leakage current and high reliability due to highly reliable planar structure.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Repetitive Peak Reverse Voltage VRRM 150 V
Nonrepetitive Peak Reverse Surge Voltage VRSM 155 V
Average Output Current IO100 mA
Surge Forward Current IFSM 50Hz sine wave, 1 cycle 5 A
Junction Temperature Tj --55 to +125 °C
Storage Temperature Tstg --55 to +125 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Reverse Voltage VRIR=200µA 150 V
Forward Voltage VFIF=100mA 0.75 V
Reverse Current IRVR=75V 50 µA
Interterminal Capacitance C VR=10V, f=1MHz 7 pF
Reverse Recovery Time trr IF=IR=100mA, See specified Test Circuit. 10 ns
Rthj-a(1) 420 °C / W
Thermal Resistance Rthj-a(2)
Mounted on Cu-foild area of 16mm
2
0.2mm t
330 °C / W
on glass epoxy board
Marking : F
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN1929B
71504 TS IM TB-00000591 / 33098 HA (KT) / 4289MO / O255KI, TS
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SB01-15CP Schottky Barrier Diode
150V, 100mA Rectifier
SB01-15CP
No.1929-2/3
Package Dimensions trr Test Circuit
unit : mm
1148A
0.4
0.95 0.95
1.9
2.9
0.5
1.5
2.5
0.5
0.16
0
0.1
0.8
1.1
2
3
1
1 : Anode
2 : No Contact
3 : Cathode
SANYO : CP
(3)
1.0
2
1.0
3
7
5
2
10
3
5
22357 23 357
10 100 ID00277
C -- VR
00.4 0.8 1.2 1.6 2.0 2.4
ID00274
IF -- VF
Ta=
125
°C
25°C
025 50 75 100 125 150 175
ID00275
IR -- VR
25°C
10
5
7
2
3
3
5
5
7
7
2
100
1000
0.1
1.0
5
2
5
2
10
100
1000
5
5
2
2
0 20406080100120
ID00276
PF(AV) -- IO
0
20
40
60
80
100
120
(2)
(4)
(1)
f=1MHz
100°C
50°C
75°C
Ta=
125°
C
Forward Voltage, VF -- V
Forward Current, IF -- mA
Reverse Voltage, VR -- V
Reverse Current, IR -- µA
Average Forward Current, IO -- mA
Average Forward Power Dissipation, PF(AV) -- mW
Reverse Voltage, VR -- V
Interterminal Capacitance, C -- pF
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
180°
360°
θ
360°
Rectangular
wave
Sine wave
Duty10%
5010010
--5V trr
10µs
100mA100mA
10mA
SB01-15CP
No.1929-3/3
70.01 23 7
0.1
052 2337
1.0
5
6
7
4
2
5
3
1
IT00278
IFSM -- t
IS
20ms
t
Time, t -- s
Surge Forward Current, IFSM(Peak) -- A
Current waveform 50Hz sine wave
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2004. Specifications and information herein are subject
to change without notice.
PS