Data Sh
eet
Part Number 856464
380 MHz SAW Filter
Subject to change or obsolescence without notice Rev C © 28-Nov-06 TriQuint Semiconductor, Inc. Page 1 of 5
Features
• For WiMAX and WiBro applications
• Usable bandwidth of 4 MHz
• Low loss
• High attenuation
• Single-ended or balanced operation
• Ceramic Surface Mount Package (SMP)
• Hermetic
• RoHS compliant (2002/95/EC), Pb-free
•
Package Pin Configuration
Surface Mount 7.00 x 5.50 x 1.24 mm Bottom View
9
10
78 6
4
5
1 2 3
Pin No.
Description
4 Output
5 Output return
9 Input
10 Input return
1,2,3
6,7,8 Case ground
Case ground
5.50
0.60
1.24 NOM.
1.35 MAX.
1.40
2.54
1.00
7.00
1.27
0.69
Dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall
length and width ±0.13mm
Body: Al
2
O
3
ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0µm,
over a 2 - 6µm Ni plating
Pb
Data Sh
eet
Part Number 856464
380 MHz SAW Filter
Subject to change or obsolescence without notice Rev C © 28-Nov-06 TriQuint Semiconductor, Inc. Page 2 of 5
Electrical Specifications (1)
Operating Temperature Range:
(2)
-40 to +85
o
C
Parameter
(3)
Minimum Typical Maximum
Unit
Center Frequency (F
0
) - 380 - MHz
Maximum Insertion Loss 11 13 dB
Lower 1.5 dB Bandedge
(4)
Upper 1.5 dB Bandedge -
382.1 377.53
382.56 377.90
- MHz
MHz
Lower 10 dB Bandedge
(4)
Upper 10 dB Bandedge 376.75
- 377.00
382.95 -
383.25 MHz
MHz
Lower 20 dB Bandedge
(4)
Upper 20 dB Bandedge 376.35
- 376.83
383.18 -
383.65 MHz
MHz
Lower 30 dB Bandedge
(4)
Upper 30 dB Bandedge 375.85
- 376.41
383.62 -
384.15 MHz
MHz
Amplitude Variation
(5)
377.9 - 382.1 MHz
-
0.82
1.5
dB p-p
Group Delay
377.9 - 382.1 MHz
-
0.67
-
µsec
Group Delay Variation
(5)
377.9 - 382.1 MHz
-
42
120
nsec
Source Impedance (Balanced)
(6)
- 100 - Ω
Load Impedance (Balanced)
(6)
- 100 - Ω
Notes:
1. All specifications are based on the test circuit shown below
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to manufacturing tolerances
4. Relative to insertion loss at 380 MHz
5. Amplitude and group delay variation is the total over the defined frequency range
6. This is the optimal impedance in order to achieve the performance shown
Test Circuit:
Actual matching values may vary due to PCB layout and parasitics
100Ω
Balanced
Input
1,2,3
6,7,8
100Ω
ΩΩ
Ω
5.6nH 10 4 5.6nH
100Ω
ΩΩ
Ω
5.6nH 9
8.2nH
8.5nH
55.6nH
100Ω
Balanced
Output
Data Sh
eet
Part Number 856464
380 MHz SAW Filter
Subject to change or obsolescence without notice Rev C © 28-Nov-06 TriQuint Semiconductor, Inc. Page 3 of 5
Typical Performance (at +25
o
C)
Data Sh
eet
Part Number 856464
380 MHz SAW Filter
Subject to change or obsolescence without notice Rev C © 28-Nov-06 TriQuint Semiconductor, Inc. Page 4 of 5
Matching Schematics
Actual matching values may vary due to PCB layout and parasitics
100Ω
Balanced
Input
1,2,3
6,7,8
100Ω
ΩΩ
Ω
5.6nH 10 4 5.6nH
100Ω
ΩΩ
Ω
5.6nH 9
8.2nH
8.5nH
55.6nH
100Ω
Balanced
Output
Marking PCB Footprint
Date code
SAWTEK
856464
Pad 1
ID dot XXXXXX
0.80
1.60
5.70
1.27
1.20
2.54
7.20
The date code consists of: day of the current year (Julian,
3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only
Dimensions shown are nominal in millimeters
Tape and Reel
Section A-A
0.3
2.2
7.3
5.8
Ø1.5
8.0
4.0
2.0
A
A
Ø1.5
16.0
7.5
1.75
Pad 1 ID dot
2.0
Ø13.0
Ø20.2
Ø330
16.8
2.7
Direction of travel
Ø102
Dimensions shown are nominal in millimeters
Packaging quantity: 3000 units/reel
Data Sh
eet
Part Number 856464
380 MHz SAW Filter
Subject to change or obsolescence without notice Rev C © 28-Nov-06 TriQuint Semiconductor, Inc. Page 5 of 5
Maximum Ratings
Parameter Symbol Minimum Maximum Unit
Operating Temperature Range T -40 +85 oC
Storage Temperature Range Tstg -40 +85 oC
Warnings
• Electrostatic Sensitive Device (ESD)
• Avoid ultrasonic exposure
Material Content
• Does not contain lead (Pb) or other RoHS restricted materials
Links to Additional Technical Information
PCB Layout Tips Qualification Flowchart Soldering Profile
S-Parameters RoHS Information Other Technical Information
TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability
for applications, processes, circuits or assemblies which are implemented using any TriQuint component described in this data sheet.
Contact Information
PO Box 609501
Orlando, FL 32860-9501
USA
Phone: +1 (407) 886-8860
Fax: +1 (407) 886-7061
Email: info-product@tqs.com
Web: www.triquint.com
Or contact one of our worldwide
Network of sales offices,
Representatives or distributors
Pb
