https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page1/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB terminal block, nominal current: 125 A, rated voltage (III/2): 1000 V, nominal cross section: 35 mm², number
of potentials: 6, Number of rows: 1, Number of positions per row: 6, product range: MKDSP 25, pitch: 15 mm,
connection method: Screw connection with tension sleeve, screw head form: H1L Philipps recess with slotted
Torx, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning,
Solder pin [P]: 4.5 mm, type of packaging: packed in cardboard. Avoid placing permanent mechanical loads on
the terminal
The figure shows a 5-pos. version of
the product
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Quick and convenient testing using integrated test option
Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 25 pc
GTIN
GTIN 4017918902124
Weight per Piece (excluding packing) 130.660 g
Custom tariff number 85369010
Country of origin Slovakia
Technical data
Item properties
Brief article description PCB terminal block
Range of articles MKDSP 25
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page2/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Technical data
Item properties
Pitch 15 mm
Number of positions 6
Drive form screw head Philipps recess with slotted Torx(H1L)
Screw thread M5
Mounting type Wave soldering
Pin layout Linear pinning
Number of levels 1
Number of connections 6
Number of potentials 6
Electrical parameters
Nominal current 125 A
Nom. voltage 1000 V
Contact resistance Test passed IEC 60512-2-1:2002-02
Rated voltage (III/3) 1000 V
Rated voltage (III/2) 1000 V
Rated voltage (II/2) 1000 V
Rated surge voltage (III/3) 8 kV
Rated surge voltage (III/2) 8 kV
Rated surge voltage (II/2) 8 kV
Connection capacity
Connection method Screw connection with tension sleeve
pluggable no
Conductor cross section solid 0.5 mm² ... 35 mm²
Conductor cross section flexible 0.5 mm² ... 35 mm²
Conductor cross section AWG / kcmil 20 ... 2
Conductor cross section flexible, with ferrule without plastic sleeve 1 mm² ... 35 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 1.5 mm² ... 35 mm²
2 conductors with same cross section, solid 0.5 mm² ... 6 mm²
2 conductors with same cross section, flexible 0.5 mm² ... 6 mm²
2 conductors with same cross section, flexible, with ferrule without plastic
sleeve 0.5 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with
plastic sleeve 0.5 mm² ... 16 mm²
Stripping length 18 mm
Torque 2.5 Nm ... 4.5 Nm (≤ 25 mm² = 2.5 Nm; 35 mm² = 4.5 Nm)
Information on the aluminum conductor
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page3/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Technical data
Information on the aluminum conductor
Cross section-torque-form of cable Cable cross section:35 mm²; Torque:4.5 Nm; Form of cable:round, single-
strand, class 1(re)
Cable cross section:25 mm²; Torque:2.5 Nm; Form of cable:round, single-
strand, class 1(re)
Cable cross section:16 mm²; Torque:2.5 Nm; Form of cable:round, single-
strand, class 1(re)
Specification DIN VDE 0276-603 (VDE 0276-603):2010-03
Note on conductor pretreatment
The following measures are required for durable and reliable contacting of
the aluminum conductor: the stripped end of the aluminum conductor must
be separated from the oxide layer using a blade, and immediately dipped
in non-acid and non-alkali Vaseline. The pretreatment must be repeated
when connecting the conductors anew.
Material data - contact
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface terminal point (top layer) Tin (5 - 7 µm Sn)
Metal surface soldering area (top layer) Tin (5 - 7 µm Sn)
Material data - housing
Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN60695-2-12 850
Glow wire ignition temperature GWIT according to EN60695-2-13 775
Temperature for the ball pressure test according to EN60695-10-2 125 °C
Dimensions for the product
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung
im Download Center
Length [ l ] 31 mm
Width [ w ] 90 mm
Height [ h ] 43.5 mm
Pitch 15 mm
Height (without solder pin) 39 mm
Solder pin [P] 4.5 mm
Pin dimensions 1.2 x 1.2 mm
Dimensions for PCB design
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page4/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Technical data
Dimensions for PCB design
Hole diameter 1.6 mm
Packaging information
Type of packaging packed in cardboard
Pieces per package 25
Denomination packing units Pcs.
Processing notes
Process Wave soldering
Specification Following IEC 61760-1:2006-04
Following IEC 60068-2-54:2006-04
Ambient conditions
Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating
curve)
Termination and connection method
Test for conductor damage and slackening IEC 60999-1:1999-11
Test passed
Pull-out test
Pull-out test IEC 60999-1:1999-11
Conductor cross section / conductor type / tensile force 0.5 mm² / solid / > 20 N
0.5 mm² / flexible / > 20 N
35 mm² / stranded / > 190 N
35 mm² / flexible / > 190 N
Mechanical tests according to standard
Test specification IEC 60947-7-4
Electrical tests
Rated current 125 A
Conductor cross section 35 mm²
Rated voltage (III/2) 1000 V
Rated surge voltage (III/2) 8 kV
Air clearances and creepage distances
Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 8 mm
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page5/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Technical data
Air clearances and creepage distances
Minimum clearance - inhomogeneous field (III/2) 8 mm
Minimum clearance - inhomogeneous field (II/2) 8 mm
Minimum creepage distance value (III/3) 12.5 mm
Minimum creepage distance value (III/2) 8 mm
Minimum creepage distance value (II/2) 8 mm
Temperature-rise test
Specification IEC 60947-7-4:2013-08
Requirement temperature-rise test The sum of ambient temperature and temperature rise of the PCB terminal
block shall not exceed the upper limiting temperature.
Current carrying capacity / derating curves
Caption Type: MKDSP 25/...-15,00(-F)
Vibration test
Specification IEC60068-2-6:2007-12
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Insulation resistance
Specification IEC60512-3-1:2002-02
Result Test passed
Insulation resistance, neighboring positions >5MΩ
Glow-wire test
Specification IEC 60695-2-10:2000-10
Temperature 850 °C
Time of exposure 5 s
Alternating climate test
Result Test passed
Specification ISO 6988:1985-02
Standards and Regulations
Connection in acc. with standard EN-VDE
CUL
Flammability rating according to UL 94 V0
Environmental Product Compliance
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page6/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Technical data
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Diagram
0
20
40
60
80
100
120
140
160
180
200
220
0 10 20 30 40 50 60 70 80 90 100 110
!
!= 35 mm²
Ambient temperature [°C]
Current strength [A]
Type: MKDSP 25/...-15,00(-F)
Drilling diagram
5,6 3,8
15
a
3,112,5
1,6+0,1
Dimensional drawing
5,6
a
3,8
12,5
31
39
4,5
a+15
15,4
Classifications
eCl@ss
eCl@ss 10.0.1 27440401
eCl@ss 11.0 27460101
eCl@ss 4.0 27141100
eCl@ss 4.1 27141100
eCl@ss 5.0 27141100
eCl@ss 5.1 27261100
eCl@ss 6.0 27261100
eCl@ss 7.0 27440401
eCl@ss 9.0 27440401
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page7/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Classifications
ETIM
ETIM 3.0 EC001121
ETIM 4.0 EC002643
ETIM 6.0 EC002643
ETIM 7.0 EC002643
UNSPSC
UNSPSC 6.01 30211801
UNSPSC 7.0901 39121432
UNSPSC 11 39121432
UNSPSC 12.01 39121432
UNSPSC 13.2 39121432
UNSPSC 18.0 39121432
UNSPSC 19.0 39121432
UNSPSC 20.0 39121432
UNSPSC 21.0 39121432
Approvals
Approvals
Approvals
VDE Zeichengenehmigung / IECEE CB Scheme / SEV / EAC / cULus Recognized
Ex Approvals
Approval details
VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40041859
Nominal voltage UN 1000 V
Nominal current IN 125 A
mm²/AWG/kcmil 0.5-35
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page8/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Approvals
IECEE CB Scheme http://www.iecee.org/ CH-10724-A1
Nominal voltage UN 1000 V
Nominal current IN 125 A
mm²/AWG/kcmil 35
SEV https://www.eurofins.ch/de/ IK-4486-A1
Nominal voltage UN 1000 V
Nominal current IN 125 A
mm²/AWG/kcmil 35
EAC B.01687
cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19770427
B C
Nominal voltage UN 600 V 600 V
Nominal current IN 115 A 115 A
mm²/AWG/kcmil 20-2 20-2
Accessories
Accessories
Insulating sleeve
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, color: white
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page9/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Accessories
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, color: red
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, color: blue
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, color: yellow
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, color: green
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, color: gray
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page10/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Accessories
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, color: black
Labeled terminal marker
Zack Marker strip, flat-ZBF 15 CUS-0825019
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 15 mm, lettering field size: 5.15 x 15.1 mm, Number of individual labels:
5
Screwdriver tools
Screwdriver-SZS 1,0X6,5 VDE-1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Terminal marking
Marker strip-SK 10,0 WH:REEL-0812188
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for
terminal block width: 90000 mm, lettering field size: continuous x 10mm, Number of individual labels: 54000
https://www.phoenixcontact.com/us/products/1932627
04/19/2021Page11/11
PCB terminal block-MKDSP 25/ 6-15,00-1932627
Accessories
Zack Marker strip, flat-ZBF 15:UNBEDRUCKT-0811202
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 15 mm, lettering field size: 15 x 5.2 mm, Number of individual
labels: 5
Test plug terminal block
Reducing plug-RPS-0201647
Reducing plug, color: gray
Test plugs-MPS-MT-0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com