C
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
0.5 amp @ 28 VDC; 0.3 amp @ 125 VAC.
Current Carrying Capacity: 15 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3 milliohms.
Insulation Resistance: In excess of 10,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
SOLDER LUG - ADJUSTABLE STOPS
SWITCHES - 30° INDEXING - STOPS SET @ 2 POS.
SPECIFICATIONS AND ORDERING INFORMATION
C4 - SERIES
1.5" DIAMETER 0.5 AMP @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Terminals and Contacts: Brass with silver plate as standard.
Insulation: Diallyl phthalate.
Index: Dual-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: 30° standard, 36°, 45°, 60°, and 90° available.
Index Stops: Fixed standard, adjustable or continuous available.
Stop Strength: 15 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGE 55.
C4D STANDARD CONSTRUCTION
10
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
The C4 Series provides a versatile, fully enclosed design, that helps keep
dirt and moisture out of the contact area while locking in life time lubricants.
IP67 Rating Available.
Q
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS DECK DECKS SHORTING *
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS DECK DECKS SHORTING *
01 02-12 1 1 C4D0112S - A C4D0112N - A CA 06 02-06 2 3 C4D0606S - A C4D0606N - A CH
02 02-06 2 1 C4D0206S - A C4D0206N - A CH 06 02-04 3 2 C4D0604S - A C4D0604N - A CK
02 02-12 1 2 C4D0212S - A C4D0212N - A CA 06 02-12 1 6 C4D0612S - A C4D0612N - A CA
03 02-12 1 3 C4D0312S - A C4D0312N - A CA 08 02-06 2 4 C4D0806S - A C4D0806N - A CH
03 02-04 3 1 C4D0304S - A C4D0304N - A CK 09 02-04 3 3 C4D0904S - A C4D0904N - A CK
04 02-12 1 4 C4D0412S - A C4D0412N - A CA 10 02-06 2 5 C4D1006S - A C4D1006N - A CH
04 02-06 2 2 C4D0406S - A C4D0406N - A CH 12 02-04 3 4 C4D1204S - A C4D1204N - A CK
05 02-12 1 5 C4D0512S - A C4D0512N - A CA 15 02-04 3 5 C4D1504S - A C4D1504N - A CK
C
C4 D
CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS
(SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY)
ADDITIONAL OPTIONS
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
ADDITIONAL OPTIONS AND ORDERING INFORMATION C4 - SERIES
CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS.
PRINTED
CIRCUIT
BOARD
TERMINAL
OPTIONS
FRONT PRINTED CIRCUIT REAR PRINTED CIRCUIT
SHAFT
,
BUSHING
,
AND
FLAT
OPTIONS
11
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
PRINTED
CIRCUIT
BOARD
HOLE
PATTERNS
30° INDEX, 1 AND 2 POLE
36° INDEX, 10 POSITION
YW
P
R
ZU
SHAFT AS VIEWED
WITH NON-TURN LUG
AT 9 O'CLOCK AND
SHAFT IN EXTREME
CCW POSITION AND
STRUT BOLTS
ORIENTED VERTICALLY.
2 DIGIT INSULATION TOTAL ACTIVE CONTACT
SERIES TYPE POLES POSITIONS TYPE
TERMINAL INDEX STOP SHAFT/ SHAFT
TYPE ANGLE TYPE BUSHING FLAT
C4 D - DIALLYL 01 - MIN. 12 - MAX @ 30°S-SHORTING
10 - MAX@ 36°N- NON
08 - MAX @ 45°SHORTING
06 - MAX @ 60°
04 - MAX @ 90°
L-SOLDER LUG 30°F-FIXED
P-FRONT P.C. 36°A-ADJ.
(NOT IN 45°)
R-REAR P.C. 45°(30°,60°,90°
(30° & 36° ONLY) 60°ONLY) SEE SEE
Q-QUICK 90°C- CONT. CHART CHART
CONNECT "A" "B"
How to Order Additional Options:
