Board to Board INVA ( SERIES 5015 MEZZANINE CARD CONNECTOR A board to board connector system that supports the IEEE P1386 standard for mezzanine card installation in industrial computers, including VME, Futurebus and other host boards. At 1.00mm/0.039", the 64-position connector can be used with standard PCI and S-Bus mezzanine cards in 64-circuit combinations, with stack heights of 8.00mm/0.315" 15.0mm/ 0.591". fre ORDERING CODE . XX 5015 064 XXX XXX SPECIFICATIONS ~ L_pLaTING No. of Contacts: 64 Voltage: 250V max. VARIATION Pitch: 1.00mm/0.039" D.W. Voltage: 250V RMS min. NO. OF CONTACTS Current Rating: 1A (5 contacts) max. | SERIES 14=PLUG, 24=RECEPTACLE SERIES 8071 COMPACTPCI CONNECTORS Series 8071 is a 2.00mm/0.080" pitch Hard Metric press-fit connector. Developed for high speed signals and EMI protection in computers, large network server and telecommunication equipment, it conforms to IEC 1076-4- 101, CompactPCl . ORDERING CODE 17 8071 71 XXX XXX ~~ 833 27 | | PLATING CONTACT STYLE SPECIFICATIONS NO. OF CONTACTS No. of Contacts: 55, 95, 110, 125 (Female) Current Rating: 1.04 max. 17 MA cers cEMALE 77, 133, 154, 175 (Male) -Voltage: 250V max. For more information on Board to Board see page 28. Pitch: 2.00mmnv0.080" D.W. Voltage: 750V RMS min. SERIES 8073 2MM HARD METRIC CABLE ASSEMBLY Series 8073 cable to board connector mates with Series 8071 male connector. Each housing is modular, enabling easy stacking of the connectors. Shielded type for EM} and EMC control and non-shielded types are available. ORDERING CODE 97 8073 OXX XXX 8XX ~ L_ VARIATION CODE CABLE LENGTH CABLE STYLE SPECIFICATIONS \__. SERIES No. of Contacts: 5 CABLE ASSEMBLY Cable Lengths: 500 - 2500mm (Custom Lengths Available} Pitch: 2.00mrmv/0.080" Current Rating: 1.0A max. Voltage: 250V max. D.W. Voltage: 750V RMS min. Applicable wire sizes: AWG: 26 - 30 36 INADA For more information on Board to Board see page 28.