Enhanced Performance K Series RFI Power Line Filters
The DK series RFI power line filters are general
purpose common mode and differential mode filters
with higher performance line-to-line attenuation than
the VK series.
The E version of the DK series (EDK) has the same high
performance line-to-line attenuation while still meeting the
very low leakage current requirements of VDE portable
equipment and UL544 non-patient care equipment.
The V version of the DK series (VDK) has the same high
performance in a more cost-effective package for
applications without strict leakage current requirements.
Specifications
Maximum leakage current, each line-to-ground
VDK Models EDK Models
@ 120 VAC 60 Hz: .4 mA .22 mA
@ 250 VAC 50 Hz: .7 mA .38 mA
Hipot rating (one minute):
line-to-ground 2250 VDC
line-to-line 1450 VDC
Operating frequency: 50/60 Hz
Rated voltage (max.): 250 VAC
Rated current:
1VDK/1EDK 1A
3VDK/3EDK 3A
6VDK/6EDK 6A
10VDK/10EDK 10A
20VDK/20EDK 20A
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current Frequency-MHz
Rating .15 .5 1 5 10 30
VDK Models
1A, 3A 18 30 40 48 48 40
6A, 10A, 20A 10 22 30 39 44 50
EDK Models
1A, 3A 17 27 33 45 45 40
6A, 10A, 20A 10 19 25 34 40 46
Line-to-line in 50 ohm circuit
Current Frequency-MHz
Rating .15 .5 1 5 10 30
VDK, EDK Models
1A, 3A 18 47 62 60 50 45
6A, 10A, 20A 20 43 55 65 60 55
22
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com
Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com
specified. Values in italics Specifications subject Germany: 49-89-6089-0
are metric equivalents. to change.
DK Series
DK Series
CORCOM Product Guide
DK6
DK3
DK1
UL Recognized
CSA Certified
VDE Approved
Electrical Schematic
LINE LOAD
Resistor location for reference only.
DK1
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com
Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com
specified. Values in italics Specifications subject Germany: 49-89-6089-0
are metric equivalents. to change.
Enhanced Performance K Series RFI Power Line Filters (Continued)
Case Styles
Case Dimensions
A B C DE
Part No. (max) (max) (max) ±.015 (max)
±.38
1VDK1, 1EDK1 3.35 2.07 1.16 2.375 2.81
85.1 52.6 29.5 60.33 71.4
1VDK3, 1EDK3 2.07 2.07 1.16 2.375 2.81
52.6 52.6 29.5 60.33 71.4
3VDK1, 3EDK1, 3.85 2.07 1.16 2.938 3.35
6VDK1, 6EDK1 97.8 52.6 29.5 74.63 85.1
3VDK3, 3EDK3, 2.56 2.07 1.16 2.938 3.35
6VDK3, 6EDK3 65.0 52.6 29.5 74.63 85.1
10VDK1, 3.85 2.07 1.32 2.938 3.35
10EDK1 97.8 52.6 33.5 74.63 85.1
10VDK3, 2.57 2.07 1.32 2.938 3.35
10EDK3 65.3 52.6 33.5 74.63 85.1
20VDK1, 3.85 2.58 1.78 2.938 3.35
20EDK1 97.8 65.5 45.2 74.63 85.1
20VDK6 3.46 2.58 1.78 2.938 3.35
87.9 65.5 45.2 74.63 85.1
23
RFI Power Line Filters
DK Series
CORCOM Product Guide
VDK1/EDK1
VDK3/EDK3
20VDK1/20EDK1
20VDK6
E
D
A
B
C
E
D
A
C
B
Green/Yellow
Blue
Brown
Blue
Brown
ED
A
B
C
ED
A
B
C
Terminals:
No. 8-32 (5)
Part Numbers
01VDK1 01EDK1
01VDK3 01EDK3
03VDK1 03EDK1
03VDK3 03EDK3
06VDK1 06EDK1
06VDK3 06EDK3
10VDK1 10EDK1
10VDK3 10EDK3
20VDK1 20EDK1
20VDK6
Torque 18± 2 in.lb.
Typical dimensions:
Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4)
Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1]
Typical dimensions:
Wire Leads: 4.0 [101.6] (Min.) Mounting Holes: .188 [4.78] Dia. (2)
Typical dimensions:
Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4)
Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1]
