SKSV 2.8x1.9mm Compact Type with Projection (Surface Mount Type) TACT SwitchTM Width of 1.9mm contributes to thinner product designs and greater mounting efficiency Typical Specifications Items Specifications Sharp Feeling Ratingmax. 50mA 12V DC Ratingmin. 10A 1V DC Initial contact resistance 500m max. Travelmm 0.12 Soft Feeling Protective structure IP67 equivalent Product Line Snap-in Type Surface Mount Type Product No. Operating force SKSVCAE010 1.6N SKSVCCE010 2.2N Operating direction Minimum order unitpcs. Operating life 5mA 5V DC Japan Export 20,000 20,000 300,000 cycles Top push 100,000 cycles Packing Specifications Taping Unit:mm Radial Type Number of packagespcs. 1 reel 1 case / Japan 1 case / export packing 20,000 200,000 Tape width mm Export package measurementsmm 12 395x395x205 200,000 Reel size Note For reels of 330mm diameter, please inquire. o380 13.5 Dimensions Unit:mm PC board mounting hole and land dimensions Viewed from switch mounting face Style 3 2.8 1 3 4 0.04 0.55 2 1.73 0.59 1.9 1.55 0.75 3.1 2 Circuit Diagram Assumes the switch is left alone without being operated. Under the specified conditions, dust and water ingress with a significant impact on the switch's on-off function is prevented. IP67 dust and water resistance is guaranteed for the switch alone and performance may not be guaranteed depending on the mounting conditions and usage. Refer to P.265 for soldering conditions. 222 Surface Mount SKSD Series SKRN SKTA SKSV SKSW SKSF SKSM NEW SKTK SKSG TM Switch TACT Sharp Feeling Type Type NEW Photo Features Compact size Low-profile Double action -- -- Dust-proof -- -- -- -- -- -- -- 67 equivalency 67 equivalency -- 67 equivalency 67 equivalency Top push Side push -- -- -- -- -- -- -- -- -- W 4.1 2.6 2.8 3 2.8 3.4 5.9 3 D 3.9 1.6 1.9 2 2.4 2.9 4 2.7 H 0.6 0.53 0.55 0.6 0.65 0.7 0.78 1.4 0.11 0.12 0.13 0.25 0.12 -- -- -- -- -- -- -- Dimensions mm 6 0.9 Surface Mount Type -- 1N max. 1N to 2N Operation force coverage 2N to 3N 3N to 4N Snap-in Type -- Soft Feeling 67 equivalency 68 equivalent in some cases IP standard Operating direction High operation force Compact size Sharp Feeling Water-proof Long life See the relevant pages for respective product descriptions 4N to 5N Ground terminal Operating temperature range Automotive use See the relevant pages for respective product descriptions -40 to 90 -- 0.1 -- Radial Type Travelmm -30 to 85 -- -- -- -- -- Life Cycle Electrical performance Ratingmax. Resistive load 50mA 12V DC Ratingmin. Resistive load 10A 1V DC Insulation resistance Voltage proof 100V AC 1min. 250V AC 1min. 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Lifetime Shall be in accordance with individual specifications. Cold -40 96h Dry heat 90 96h Damp heat 60, 90 to 95%RH 96h Page 219 220 100M min. 100V DC 1min. 100V AC 1min. Vibration Durability Environmental performance 50M min. 100V DC 1min. 100M min. 100V DC 1min. 221 222 223 225 226 227 228 WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. TACT SwitchTM Soldering Conditions 265 TACT SwitchTM Cautions 266 Notes 1. The automotive operating temperature range to be individually discussed upon request. 2. Indicates applicability to all products in the series, while indicates applicability to some products in the series. 191 TACT SwitchTM Soldering Conditions TM Switch TACT Condition for Reflow Available for Surface Mount Type. 1. Temperature measurement: Thermocouple 0.1 to 0.2 CAKor CCTat solder joints copper foil surface. A heat resistive tape should be used to fix thermocouple. 2. Temperature profile Temperature (C ) 260C max. 3 sec max. Sharp Feeling 230C 180 150 Time Soft Feeling 120 sec max. pre-heating 40s max. 3 to 4min. Time inside soldering equipment Manual Soldering Available for Snap-in Type and Radial Type. Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Items Condition Soldering temperature 350 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. Preheating time 60s max. Soldering temperature 260 max. Duration of immersion 5s max. Items Condition Number of soldering 2times max. Soldering temperature 360 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. SKHH, SKPD Series Radial Type Items Surface Mount Type Conditions for Auto-dip Snap-in Type Notes 1. The above temperature shall be measured of the top of switch. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. SKHH, SKHW, SKRG, SKPD Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 110 max. Items Condition Preheating time 60s max. Soldering temperature 350 max. Soldering temperature 260 max. Duration of soldering 3s max. Duration of immersion 5s max. Capacity of soldering iron 20W max. Number of soldering 2times max. SKTD, SKTG, SKQJ, SKQK, SKEG Series SKQJ, SKQK, SKEG Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Preheating time 45s max. Soldering temperature 255 max. Duration of immersion 5s max. Number of soldering 2times max. Notes 1. Prevent flux penetration from the top side of the TACT SwitchTM. 2. Switch terminals and a PC board should not be coated with flux prior to soldering. 3. The second soldering should be done after the switch is stable with normal temperature. 4. Use the flux with a specific gravity of min 0.81. EC-19S-8 by TAMURA Corporation, or equivalents. 265