LITE-ON SEMICONDUCTOR STPF1010CT thru 1020CT REVERSE VOLTAGE - 100 to 200 Volts FORWARD CURRENT - 10 Amperes SUPER FAST GLASS PASSIVATED RECTIFIERS ITO-220AB FEATURES B M DIM. K A B C D A C Glass passivated chip Superfast switching time for high efficiency Low forward voltage drop and high current capability Low reverse leakage current High surge capacity Plastic package has UL flammability classification 94V-0 PIN 2 F 3 E 1 G H J F G MECHANICAL DATA I J K I Case : ITO-220AB molded plastic Polarity : As marked on the body Weight : 0.06 ounces, 1.70 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) D E H N H L PIN 1 PIN 2 CASE PIN 3 ITO-220AB MIN. MAX. 15.50 10.0 3.00 16.50 10.40 3.50 9.00 9.30 2.90 13.46 3.60 14.22 1.70 1.15 2.40 0.75 2.70 1.00 0.45 0.70 3.00 3.30 L 4.36 4.77 M 2.48 2.80 2.80 2.50 N All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage STPF1010CT STPF1020CT UNIT 100 70 100 200 140 200 V V VRRM VRMS VDC V Maximum Average Forward Rectified Current @TC=110 I(AV) 10 A Peak Forward Surge Current 8.3ms single half sine-wave @TJ=25 IFSM 55 A 1.1 1.0 1.25 1.20 V IR 10 250 uA CJ 60 pF Maximum Reverse Recovery Time (Note 2) TRR 30 ns Typical Thermal Resistance (Note 3) R0JC 4.0 /W TJ,TSTG -55 to +150 Vdis 2000 V IF=5A@TJ =25 Maximum forward Voltage IF=5A@TJ =125 Pulse Width =300us IF=10A@TJ =25 Duty cycle IF=10A@TJ =125 Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 @TJ =100 Typical Junction Capacitance per element (Note 1) Operating and Storage Temperature Range Dielectric Strengh from terminals to case, AC with t=1 minute, RH<30% VF NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Reverse Recovery Test Conditions:IF=0.5A,IR=1.0A,IRR 0.25A. 3. Device mounted on 100 mm x 100 mm x 1.6 mm Cu Plate REV. 3, Sep -2010, KTGC18 RATING AND CHARACTERISTIC CURVES STPF1010CT thru STPF1020CT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 12 10 8 6 4 2 0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 25 50 75 100 125 150 60 50 40 30 20 Pulse Width 8.3ms Single Half-Sine-Wave 10 0 1 175 2 5 CASE TEMPERATURE , C 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100.0 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 125 C 10.0 TJ = 100 C 1.0 TJ = 25 C 0.1 0.01 .001 10 TJ = 25 C 1.0 PULSE WIDTH 300us 300ua 2% Duty cycle 0.1 0 20 60 140 100 0 0.2 0.4 0.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 10 4 10 REVERSE VOLTAGE , VOLTS 100 1.8 Legal Disclaimer Notice STPF1010CT thru STPF1020CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.