RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 1 8 L.E.D. 1 13.63 [.537] L.E.D. 2 PCB EDGE LP 3.200.20 [.126.008] 15.88 [.625] 14.72 [.580] 21.59 [.850] MAX 0.380.10 [.015.004] 16.66 [.656] 10.89 [.429] 11.430.13 [.450.005] NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) Information: CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 m (30 in) OVER Ni TERMINAL FINISH: SnPb LED LENS: EPOXY OPERATING TEMPERATURE: -40C TO 85C LED 1 RIGHT LED LED 2 LINK LED 1 RECHTE COD E 203290 GREE N GREE N L3 Scale Subject to modification without SK prior notice. H Drawing will not be updated. All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Index - Date - Designation MOD JACK - MJIM 8C8T, 1X1, INT. MAG., LED ALIGNED www.ERNI.com - 2:1 All Dimensions in mm SCHEMATIC NUMBER: H3D01 Consider protection memo from DIN 34 SHIELDING: Cu ALLOY, PLATED WITH Ni LED 2 LEFT Tolerances MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK NO. IDENT. NR. - 133883 MAXM J I ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01 EXTENDED TERMPERATURE RANGE ELEKTRISCHES DIAGRAMM PC B CABL E P1 J1 CT P4 P2 J2 P3 J3 P6 J6 CT P5 N/C P7 J4,5 GND P8 J7,8 1000pF/2KV W 4X 75 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL 0.05 [.002] UNLESS NOTED SCALE: 2.5 : 1 1.27 [.050] 0.64 [.025] 2.54 [.100] 8 0.890.07 [ .035.003] X8 1 1.600.07 [ .063.003] X2 9 10 .040.003] X4 8.18 [.322] 2.54 [.100] 3.05 [.120] 1.020.07 [ .128.003] X2 4.06 [.160] 3.250.07 [ 8.89 [.350] 11 12 11.43 [.450] 13.26 [.522] 15.49 [.610] MAGNETICS SPECIFICATIONS @ 25C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 3% (P3-P6 : J3-J6) 1CT : 1 3% LED SPECIFICATIONS OCL (100KHz, 0.1Vrms, 8mA) (P1-P2 : P3-P6) DCR (P1-P2, P3-P6) LED ANWEISUNG 350H MIN 1.1 OHMS MAX 0.1 MHz - 100 MHz V f COLO R FARBE INSERTION LOSS: TYP -1.1 dB MAX GREE N RETURN LOSS: -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN 60 MHz - 80 MHz -12 dB MIN CROSSTALK (0.1 MHz - 100 MHz): -40 dB TYP COMMON MODE REJECTION 0.1 MHz - 30 MHz: -50 dB TYP 30 MHz - 60 MHz: -40 dB TYP 60 MHz - 100 MHz: ISOLATION: -35 dB TYP 1500 Vrms Information: m A 2.5 20 2.2 Tolerances Scale I All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. - Index Date SCHALTSKIZZE 9 10 11 12 2:1 - Designation MOD JACK - MJIM 8C8T, 1X1, INT. MAG., LED ALIGNED www.ERNI.com - CIRCUIT DIAGRAM f All Dimensions in mm Consider protection memo from DIN 34 0.5 MHz - 30 MHz V f MA X 133883 MAXM J I