5-9495LE-3/4-4R - 3M (TC) - Datasheet.Live

3M™Double Coated Tapes 9474LE • 9495LE

Product Description

3M™ Double Coated Tapes with 3M™ Laminating Adhesive 300LSE provides high bond strength to most surfaces, including

many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent

adhesion to surfaces contaminated lightly with oil typically used with machine parts.

Technical Data November 2011

Construction

Faceside1Carrier Backside2Liner Total Tape

Product Adhesive Type/ Adhesive Color, Type, Liner Thickness

Number Thickness Thickness Thickness Print Caliper3(w/o liner)

3M™ Double 2.8 mil Clear Polyester 3.4 mil Faceside Liner/ 4.2 mil 6.7 mil

Coated Tape (0.071mm) 0.5 mil (0.086mm) Tan, 58# (0.11mm)/ (0.17mm)

9474LE (0.013mm) Polycoated Kraft, 4.2 mil

no print (0.11mm)

Backside Liner/

Tan, 58#

Polycoated Kraft,

“3M 300LSE”

3M™ Double 2.8 mil Clear Polyester 3.4 mil Tan, 58#, 4.2 mil 6.7 mil

Coated Tape (0.071mm) 0.5 mil (0.086mm) Polycoated Kraft (0.11mm) (0.17mm)

9495LE (0.013mm) “3M 300LSE”

Note 1: Faceside (FS) adhesive is on the interior of the roll, exposed when unwound.

Note 2: Backside (BS) adhesive is on the exterior of the roll, exposed when liner is removed.

Note 3: The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.

Features

• This tape has a film carrier which can add dimensional stability to foams and other substrates and also makes it easier to

handle the tape during slitting and die-cutting.

• 3M™ Double Coated Tape 9474LE features a dual liner for ease in selective die cutting.

• The bond strength of 3M™ Laminating Adhesive 300LSE increases as a function of time and temperature, and has very

high initial adhesion.

Application Ideas

• Foam to powder coated painted surfaces.

• Low surface energy plastic adhesion.

• Lens bonding applications.

3M™Double Coated Tapes 9474LE • 9495LE

Typical Physical Properties and Performance Characteristics

Note: The following technical information and data should be considered representative or typical only and should not be

used for specification purposes.

(2)

Product Number 3M™ Double Coated Tapes 9474LE, 9495LE

Adhesion to stainless steel Oz/in (N/cm) [kg/25.4 mm]

ASTM D3330 - 180 degree, 2 mil Al foil

- 15 minute RT 60 (6.6) [1.7]

- 72 hour RT 90 (9.9) [2.6]

Adhesion to other surfaces

ASTM D3330 - 180 degree, 2 mil Al foil, 72 hour RT

ABS 110 (12.0) [3.1]

Polypropylene 125 (13.7) [3.6]

Polycarbonate 130 (14.2) [3.7]

Glass 95 (10.4) [2.7]

Shear Strength - ASTM D3654 modified -

(.5 inch2sample size)

1000 grams at 72°F (22°C) >10,000 minutes

500 grams at 158°F (70°C) >10,000 minutes

Relative High Temperature

Operating Ranges:

Long Term (days, weeks) 200°F (93°C)

Short Term (minutes, hours) 300°F (149°C)

Relative Solvent Resistance: Very Good

Dielectric Properties:

Dielectric Strength 1100 volts/mil

Breakdown Voltage 7100 volts

Product Number 3M™ Double Coated Tape 9474LE 3M™ Double Coated Tape 9495LE

Maximum Length in:

1/2" to 63/64" – 180 yd. (164 m)

1" to 3" – 360 yd. (329 m)

3" to 48" – 360 yd. (329 m)

48" to 54" – 360 yd. (329 m)

Normal Slitting Tolerance – ±1/32 in. (0.8 mm)

Core Size – 3.0 in. (76.2 mm)

Sheet Size 24" x 36" –

Available Sizes

Roll length, width, slitting tolerance, core size.

Available Lengths (Subject to minimum order requirements)

(3)

3M™Double Coated Tapes 9474LE • 9495LE

Application Techniques

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure and

moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the adhesive in developing intimate contact with the

bonding surface.

To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning

solvents are isopropyl alcohol or heptane.*

Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures

below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly

applied, low temperature holding is generally satisfactory.

*Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents.

These cleaning recommendations may not be compliant with the rules of certain Air Quality Management

Districts in California; consult applicable rules before use.

Application Equipment

To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more

about working with pressure-sensitive adhesives please refer to technical bulletin, Lamination Techniques for Converters of

Laminating Adhesives (70-0704-1430-8).

For additional dispenser information, contact your local 3M sales representative, or the toll free 3M sales assistance number

at 1-800-251-8634.

Environmental Performance

Humidity Resistance: High humidity has minimal effect on adhesive performance. No significant reduction in bond

strength is observed after exposure for seven days at 90°F (32°C) and 90% relative humidity.

UV Resistance: When properly applied, nameplates and decorative trim parts are not adversely affected by exposure to

direct sunlight.

Water Resistance: Immersion in water has no appreciable effect on the bond strength. After 100 hours at room

temperature, the high bond strength is maintained.

Temperature Cycling Resistance: High bond strength is maintained after cycling four times through:

4 hours at 158°F (70°C)

4 hours at -20°F (-29°C)

4 hours at 73°F (22°C)

Chemical Resistance: When properly applied, nameplate and decorative trim parts will hold securely after exposure to

numerous chemicals including oil, mild acids and alkalis.

Storage

Store in original cartons at 70°F (21°C) and 50% relative humidity.

Shelf Life

If stored under proper conditions, product retains its performance and properties for two years from date of manufacture.

(4)

3M™Double Coated Tapes 9474LE • 9495LE

Certification/Recognition

MSDS: 3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of the Occupational

Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under

reasonable conditions or in accordance with the 3M directions for use, the product should not present a health and safety

hazard. However, use or processing of the product in a manner not in accordance with the directions for use may affect its

performance and present potential health and safety hazards.

TSCA: This product is defined as an article under the Toxic Substances Control Act and therefore, it is exempt from

inventory listing requirements.

RoHs Complaint/REACH Compliant: This product complies with the European Union’s “Restriction of Hazardous

Substances” (RoHs) initiative and with European REACH regulations 2002/95/EC and 2005/618/EC.

For Additional Information

To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634. Address

correspondence to: 3M, Electronics Markets Materials Division, 3M Center, Building 225-3S-06, St. Paul, MN 55144-

1000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone:

1-787-750-3000. In Mexico, phone: 52-70-04-00.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed

to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and

determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements

contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized

officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER

WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,

your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M

product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential

loss or damage arising from this 3M product, regardless of the legal theory asserted.

3M is a trademark of 3M Company.

Please recycle. Printed in U.S.A.

60-5002-0532-7 3

Electronics Markets Materials Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

1-800-251-8634 phone

651-778-4244 fax