Amphe-Lite Series fiber optic termini - multi-mode, size 16 Amphenol(R) Multi-mode, Size 16 Termini Features and Performance Levels: * Ceramic alignment ferrule which precisely positions the fiber within the termini * Phosphor bronze alignment sleeve, assembled on the socket after polishing insures accurate fiber to fiber alignment (a ceramic alignment sleeve is also available). * Typical insertion loss for 100/140 fiber with .2 NA at 820 nm is .5 to .7 dB using Air Gap (AG) polish technique Use of the ceramic ferrule and sleeve maximizes the ability to hold extremely tight dimensional tolerances while maintaining accurate concentricity, thus providing superior and consistent optical loss performance. * Termination accomplished using the industry proven epoxy/ polish method. Can be polished Air Gap (AG) or Physical contact (PC). * Socket cleaning optional. Consult Amphenol, Sidney, NY for termini cleaning tool. For application tools consult Sidney, NY. Size 16 Multi-mode Pin Terminus .102 .001 DIA .0625 Size 16 Multi-mode Socket Terminus SOCKET SPRING STAINLESS STEEL BODY PHOSPHOR BRONZE ALIGNMENT SLEEVE CERAMIC FERRULE CERAMIC FERRULE STAINLESS STEEL BODY PIN Multi-mode Size 16 Fiber Optic Termini 1.176 MAX* A DIA REF .080 MAX CABLE DIA CERAMIC FERRULE +.0000 DIA -.0002 .297 +.003 -.002 STRENGTH MEMBER SHRINK TUBE 1.500 MAX* 1.093 .020 .080 MAX CABLE DIA .040 MAX BUFFER CABLE DIA .162 .004 SHRINK TUBE STRENGTH MEMBER .102 .001 DIA CERAMIC FERRULE Amphenol(R) Multi-Channel fiber optic connectors are supplied less contacts. Order multi-mode termini by Amphenol part number designation as shown in the chart below. Consult Amphenol, Sidney, NY for further availability. Ordering Information Multi-mode Termini (Size 16) for Amphe-Lite Connectors Fiber Size Core/Cladding Dia (Microns) 50/125 62.5/125 100/140 100/140/172 100/140/172 200/230 200/240 200/280 200/300 .040 MAX BUFFER CABLE DIA A Dia Ref Size 16 Socket Size 16 Pin Inches Microns CF-198035-010 CF-198036-010 .0050 127 CF-198035-017 CF-198035-029 CF-198035-29A CF-198035-053 CF-198035-057 CF-198035-074 CF-198035-080 CF-198036-017 CF-198036-029 CF-198036-29A CF-198036-053 CF-198036-057 CF-198036-074 CF-198036-080 .0057 .0069 .0068 .0093 .0097 .0114 .0120 145 175 173.5 236 245 290 305 Additional sizes available upon request: consult Amphenol, Sidney, NY for availability. Power contacts can be purchased separately, contact Amphenol, Sidney, NY. 18 .06240 DIA +.00002 -.00002 A DIA REF ALIGNMENT SLEEVE** .267 .003 * Indicated dimension when fully assembled. ** Alignment sleeve shipped unassembled. Amphe-Lite Series fiber optic termini - multi-mode, size 20 Amphenol(R) Multi-mode, Size 20 Termini Features and Performance Levels: * Designed for use in size 20 cavities of Amphe-Lite connectors * Designed with similar high performance components as the proven size 16 termini * Comparable performance and reliability to the size 16 termini can be expected * Offers increased termini density in Amphenol Amphe-Lite connectors * Maintains fiber optic/electrical hybrid capabilities * Allows for multiple fiber accommodations * Termination accomplished using the industry proven epoxy/ polish method. Can be polished Air Gap (AG) or Physical contact (PC). * Socket cleaning optional. Consult Amphenol, Sidney, NY for termini cleaning tool. For application tools consult Sidney, NY. SOCKET SPRING STAINLESS STEEL BODY PHOSPHOR BRONZE ALIGNMENT SLEEVE CERAMIC FERRULE CERAMIC FERRULE PIN STAINLESS STEEL BODY Multi-mode Size 20 Fiber Optic Termini Size 20 Multi-mode Pin Terminus .069 .001 DIA .03937 1.176 MAX* A DIA REF +.00012 DIA -.00000 Size 20 Multi-mode Socket Terminus .297 +.003 -.002 STRENGTH MEMBER 1.500 MAX* .037 MAX BUFFER CABLE DIA .03937 STRENGTH MEMBER .162 .002 .069 .001 DIA SHRINK TUBE CERAMIC FERRULE Ordering Information Multi-mode Termini (Size 16) for Amphe-Lite Connectors 50/125 62.5/125 100/140 A Dia Ref Size 20 Socket Size 20 Pin Inches Microns CF-198080-010 CF-198081-010 0.0050 127 CF-198080-017 CF-198081-017 0.0057 145 Additional sizes available upon request: consult Sidney, NY for availability. Power contacts can be purchased separately, contact Sidney, NY. 19 A DIA REF +.00012 DIA -.00000 ALIGNMENT SLEEVE** .263 .004 * Indicated dimension when fully assembled. ** Alignment sleeve shipped unassembled. Amphenol(R) Multi-Channel fiber optic connectors are supplied less contacts. Order multi-mode termini by Amphenol part number designation as shown in the chart below. Consult Amphenol, Sidney, NY for further availability. Fiber Size Core/Cladding Dia (Microns) .037 MAX BUFFER CABLE DIA SHRINK TUBE 1.093 .020 .123 MIN .063 MAX CABLE DIA .063 MAX CABLE DIA CERAMIC FERRULE Amphe-Lite Series fiber optic termini - 90 multi-mode, size 16 Amphenol provides 90, size 16 fiber optic termini that can be used with multi-channel cylindrical connectors. 90 Socket Termini (Size 16) Ordering Information for 90 Multi-mode Socket Termini Fiber Size Core/Cladding Dia (Microns) 50/125 62.5/125 100/140 SHRINK TUBING*** 100/140/172 .500 RADIUS REF. 1.820 MAX.** 1.100 REF. .675 MAX. 1.093 .020 A DIA. REF. .557 .008 .537 REF. 1.145 MAX. .102 .001 DIA. .162 .004 .128 +.002 DIA. -.001 .06240 .00002 Socket, Size 16 Amphenol Part Number A Dia Ref For use in Cylindrical Connectors Inches Microns CF-198111-010 .0050 127 CF-198111-017 CF-198111-29 CF-198111-29A .0057 .0069 .0068 145 175 173.5 OR Additional sizes available upon request: consult Amphenol, Sidney, NY for availability. * Consult Amphenol, Sidney, NY for ordering information. ** Indicated dimension when fully assembled. *** Shrink tubing and alignment sleeve are shipped unassembled. ALIGNMENT SLEEVE*** .267 +.003 -.002 CERAMIC FERRULE 90 Pin Termini (Size 16) Ordering Information for 90 Multi-mode Pin Termini Fiber Size Core/Cladding Dia (Microns) 50/125 62.5/125 100/140 100/140/172 50/125 62.5/125 100/140 100/140/172 Pin, Size 16 Amphenol Part Number For use in Cylindrical Connectors A Dia Ref B Max (Inches) C Ref (Inches) Inches Microns CF-198110-010 .0050 127 1.121 1.100 CF-198110-017 CF-198110-029 CF-198110-29A .0057 .0069 .0068 145 175 173.5 1.121 1.121 1.121 1.100 1.100 1.100 CF-198112-010 .0050 127 1.003 .900 CF-198112-017 CF-198112-029 CF-198112-29A .0057 .0069 .0068 145 175 173.5 1.003 1.003 1.003 .900 .900 .900 OR OR Additional sizes available upon request: consult Amphenol, Sidney, NY for availability. * Consult Amphenol, Sidney, NY for ordering information. .500 RADIUS .297 +.003 -.002 .102 .001 .0625 +.0000 DIA. -.0002 SHRINK TUBE A DIA. REF. 20 CERAMIC FERRULE .128 +.002 DIA. -.001 B MAX C REF Amphe-Lite Series application tools The following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing contacts incorporated in the Amphe-Lite Series connectors. For additional information on coaxial contact tools see catalog 12-130. All crimping tools included are the "full cycling" type. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. RECOMMENDED CRIMPING TOOLS Contact Size/Type 12 Pin and Socket 16 Pin and Socket 20 Pin and Socket 22D Pin 22D Socket 8 Twinax Center Pin and Socket 8 Twinax Intermediate Outer Pin & Socket Crimping Tool M22520/1-01 M22520/1-01 M22520/7-01 M22520/1-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 Turret Die or Positioner M22520/1-04 M22520/1-04 M22520/7-04 M22520/1-04 M22520/2-10 M22520/7-08 M22520/2-09 M22520/7-07 M22520/2-07 M22520/7-05 M22520/2-01 M22520/2-37 M22520/5-01 M22520/5-200 Contact Size/Type 8 Coaxial Inner Pin and Socket Crimping Tool Turret Die or Positioner M22520/2-01 M22520/2-31 M22520/5-05 Die Closure B M22520/5-41 Die Closure B M22520/10-07 Die Closure B M22520/5-01 8 Coaxial Outer Pin and Socket M22520/5-01 M22520/10-01 16 Coaxial Inner Pin and Socket 16 Coaxial Outer Pin and Socket 12 Coaxial Inner Pin and Socket 12 Coaxial Outer Pin and Socket 10 (Power) Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above crimping tools and positioners are available from the approved tool manufacturer. M22520/2-01 M22520/2-35 M22520/4-01 M22520/4-02 M22520/2-01 M22520/2-34 M22520/31-01 M22520/31-02 TP201423 1716P-1 INSERTION TOOLS Plastic Tools Use with Contact Size 10 (Power) 12 16 20 22D 8 Coaxial 8 Twinax MS Part Number M81969/14-05* M81969/14-04* M81969/14-03* M81969/14-10* M81969/14-01* Color Gray / (White) Yellow / (White) Blue / (White) Red / (Orange) Green / (White) None Metal Tools Angle Type MS Proprietary Part Number Part Number M81969/8-11 M81969/8-09 11-8674-12 M81969/8-07 11-8674-16 M81969/8-05 11-8674-20 M81969/8-01 11-8674-24 None Required M81969/46-06** None Straight Type Proprietary Part Number 11-8794-12 11-8794-16 11-8794-20 11-8794-24 Color Green Yellow Blue Red Black Red REMOVAL TOOLS Plastic Tools Use with Contact Size 10 (Power) 12 16 20 22D 8 Coaxial 8 Twinax MS Part Number M81969/14-05* M81969/14-04* M81969/14-03* M81969/14-10* M81969/14-01* M81969/14-12 M81969/14-12 Color (Gray) / White (Yellow) / White (Blue) / White (Orange)/ Red (Green) / White Green Green For Unwired Contacts Proprietary Part Number 11-10050-11 11-10050-10 11-10050-9 11-10050-7 None None Metal Tools Angle Type MS Part Number M81969/8-12 M81969/8-10 M81969/8-08 M81969/8-06 M81969/8-02 None M81969/46-12** Proprietary Part Number 11-8675-12 11-8675-16 11-8675-20 11-8675-24 11-9170 11-9170 Straight Type Proprietary Part Number 11-8795-12 11-8795-16 11-8795-20 11-8795-24 DRK264-8 N/A Color Green / White Yellow / White Blue / White Red / White Green / White N/A N/A The M81969/8, 11-8674, 11-8675,and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: Contact size 12- .155, 16- .109, 20- .077, 22D- .050. When wire diameters exceed those specified, the plastic tools must be used. * Double end insertion/removal tool. To be determined. ** Twinax insertion tools are available only in a straight type, metal version.. Contact Daniels Manufacturing Co. for availability. 21 Amphe-Lite Series how to order Amphenol(R) Amphe-Lite Composite Connectors can be ordered by coded part number. Ordering procedure is illustrated by part number AL00F9-35PB as shown below: AL 00 F 9 - 35 P B ( Connector Type Shell Style Service Class Shell Size Insert Arrangement Contact Type Alternate Positions Specials Connector Type AL designates Amphe-Lite Connector Series Shell Style 00 designates wall mount receptacle 06 designates straight plug 07 designates jam nut receptacle Service Class F electroless nickel plated composite U black composite, unplated X black zinc alloy, conductive, composite Shell Size 9 thru 25 available Insert Arrangement See insert arrangement chart, page 3. See insert configurations illustrated on pages 5-8. Contact Type P designates standard 500 cycle pin contacts S designates standard 500 cycle socket contacts Alternate Positions Locksmith keying - rotation of minor keys. "N" not required for normal position, see page 4. Specials Specials include optional contact styles and contact platings. Also includes a high decoupling style of Amphe-Lite. Consult Amphenol, Sidney, NY for part numbering suffix for specials. Standard Packaging The Amphe-Lite Series is shipped with connectors and contacts packaged in bulk. Consult Amphenol, Sidney NY for special packaging requirements 22 ) Amphe-Lite - capabilities fiber optics, filter contacts, flex termination, coax contacts FIBER OPTIC Fiber optic termini connectors offer a precision optic interconnect system within the Amphe-Lite connector. The Amphe-Lite connector provides protection from damage in severe environmental and physical conditions. Optical performance is optimized utilizing the ceramic alignment features employed by the termini. Insertion losses are typically .8dB and can range from .5 to 1.5 dB, depending on test conditions. See pages 18-20 for fiber optic termini features and how to order. Ask for publication 12-352 or contact Sidney, NY for more information on Amphenol Fiber Optic Connectors. Also available with MT and LC termination within an Amphe-Lite shell kit. Contact Amphenol, Sidney for more information. Fiber Optics FILTER CONTACTS FOR EMI PROTECTION EMI shielding protection devices can be integrated into the Amphe-Lite connector to provide a cost effective alternative to discrete devices mounted inside the box. These unique, high performance designs provide weight and space savings necessary for modern electronic systems. Ask for publication 12-120 or contact Amphenol, Sidney, NY for complete information on Amphenol Filter/Transient Protection Connectors. Filter Contacts FLEX TERMINATION ASSEMBLIES FOR PRINTED CIRCUIT BOARD APPLICATIONS Amphenol provides flex termination assemblies for printed circuit board attachment. Flex circuits are available for Amphe-Lite connectors in flat or sculptured styles. Sculptured(R) Flexible Circuits with built-in terminations eliminate the failures associated with crimped or solder-on contacts, and they are designed to geometrically fit the tight space requirements within a unit. They plug into a printed circuit board and create a self-locking terminal pad which eliminates the need for an additional interconnect to the PCB. Ask for catalog 12-170, Amphenol Cylindrical Connectors for PCB Applications. CONNECTORS WITH COAX CONTACTS Flex Termination Assemblies For shielded wire applications, coaxial contacts can be incorporated into Amphe-Lite connectors. Designed-in crimp or solder types are available to fit various RG and special cables. High performance coaxial contacts eliminate discontinuities or impedance variations due to movement of parts under axial load. For further information on coax contacts ask for catalog 12-130. 23 Coax Contacts