PRODUCT: RUEF600-1 PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com DOCUMENT: SCD 26550 PCN: RF0600 REV LETTER: B REV DATE: SEPTEMBER 26, 2007 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: Released Maximum Electrical Rating at 20C 30 VDC /100 A DC 30 VAC /70 ARMS Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin Plated Copper Marking: TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -16.5 -24.1 -(0.65) -(0.95) *Rounded off approximation C D MIN 9.4 (0.37) MAX 10.9 (0.43) MIN 25.4 (1.00) E MAX --- MIN --- MAX 3.0 (0.12) TABLE II. PERFORMANCE RATINGS: I HOLD AMPS 20C HOLD 6.00 CURRENT RATINGS AMPS AT 20C HOLD TRIP 6.00 12.00 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TIME TO TRIP RESISTANCE SECONDS AT 20C, 30.0A MAX 16.0 OHMS AT 20.0 C MIN MAX 0.005 0.02 NOMINAL ONE-HOUR TRIPPED POST-TRIP POWER RESISTANCE STANDARD DISSIPATION TRIP OHMS WATTS AT AT 20C 20C MAX 0.04 3.5 UL, CSA, TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant (c) 2006, 2007 Tyco Electronics Corporation. All rights reserved. Pb-Free