DC/DC Converter TMV 2HI Series, 2 Watt Ultra compact SIP-7 package Very high I/O-isolation 5`200 VDC (5`700 Vpk) Unregulated device Dedicated for IGBT applications Operating temperature range -40C to +85C Industry standard pinout 3-year product warranty The TMV 2HI series is a range of 2 Watt non regulated DC/DC converters with high I/O-isolation. They come in a very compact SIP-7 package. Models Order code TMV 2-0503SHI TMV 2-0505SHI TMV 2-0509SHI TMV 2-0512SHI TMV 2-0515SHI TMV 2-0505DHI TMV 2-0509DHI TMV 2-0512DHI TMV 2-0515DHI TMV 2-05159HI TMV 2-1203SHI TMV 2-1205SHI TMV 2-1209SHI TMV 2-1212SHI TMV 2-1215SHI TMV 2-1205DHI TMV 2-1209DHI TMV 2-1212DHI TMV 2-1215DHI TMV 2-12159HI Models TMV 2-1503SHI TMV 2-1505SHI TMV 2-1509SHI TMV 2-1512SHI TMV 2-1515SHI TMV 2-1505DHI TMV 2-1509DHI TMV 2-1512DHI TMV 2-1515DHI TMV 2-15159HI TMV 2-2403SHI TMV 2-2405SHI TMV 2-2409SHI TMV 2-2412SHI TMV 2-2415SHI TMV 2-2405DHI TMV 2-2409DHI TMV 2-2412DHI TMV 2-2415DHI TMV 2-24159HI http://www.tracopower.com Input voltage 5 VDC 10 % 12 VDC 10 % 15 VDC 10 % 24 VDC 10 % Output voltage 3.3 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC +15 / -9 VDC 3.3 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC +15 / -9 VDC 3.3 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC +15 / -9 VDC 3.3 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC 5.0 VDC 9.0 VDC 12 VDC 15 VDC +15 / -9 VDC Output current max. 500 mA 400 mA 222 mA 168 mA 132 mA 200 mA 112 mA 84 mA 66 mA +66 / -110 mA 500 mA 400 mA 222 mA 168 mA 132 mA 200 mA 112 mA 84 mA 66 mA +66 / -110 mA 500 mA 400 mA 222 mA 168 mA 132 mA 200 mA 112 mA 84 mA 66 mA +66 / -110 mA 500 mA 400 mA 222 mA 168 mA 132 mA 200 mA 112 mA 84 mA 66 mA +66 / -110 mA Efficiency typ. 74 % 80 % 81 % 82 % 79 % 78 % 80 % 80 % 79 % 80 % 76 % 79 % 81 % 83 % 82 % 79 % 81 % 82 % 83 % 81 % 77 % 79 % 83 % 83 % 85 % 81 % 84 % 82 % 82 % 83 % 76 % 77 % 81 % 82 % 82 % 77 % 81 % 81 % 80 % 81 % Page 1 of 3 TMV 2HI Series, 2 Watt Input Specifications Input current no load 5 Vin models: 12 Vin models: 15 Vin models: 24 Vin models: 35 mA typ. 17 mA typ. 16 mA typ. 12 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 12 Vin models: 15 Vin models: 24 Vin models: 9 V max. 18 V max. 20 V max. 30 V max. Input filter internal capacitor Output Specifications Voltage set accuracy 5 % max. Voltage balance (dual output models, balanced loads) 0.1 % typ. / 1 % max. Regulation - Input variation (1 % change of Vin) - Load variation (20 - 100 %) 3.3 Vout models: ()5 Vout models: other models: 1.2 % typ. < 20 % < 15 % < 10 % Ripple and noise (20 MHz Bandwidth) 100 mVp-p max. Short circuit protection continuous, automatic recovery Temperature coefficient 0.01 %/K typ. / 0.02 %/K max. Capacitive load -Single output 3.3 Vout models: 5.0 & 9.0 Vout models: 12 & 15 Vout models: -Dual output 5.0 & 9.0 Vout models: 12 & 15 Vout models: +15 / -9 Vout models: 1650 F max. 940 F max. 440 F max. 440 F max. (each output) 200 F max. (each output) 200 / 440 F max. Isolation /Safety Isolation voltage - Isolation test voltage (tested for 1 s) 5`700 Vpk - I/O isolation voltage (60 s) 5'200 VDC Isolation capacitance (input/output) 7 pF typ. Isolation resistance (input/output) >10 Gohm Common mode transient immunity (dv/dt) 15 kV/s min. General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +95C max. - Storage temperature -55C to +125C Derating 6.7 %/K above +80C Humidity (non condensing) 95 % rel H max. Altitude during operation 4000 m Reliability, calculated MTBF (MIL-HDBK-217F at +25C, ground benign) >1`109`000 h Switching frequency 100 kHz typ. Safety standards CAN/CSA-C22.2 No 60950-1-07, 2nd ed; A1:2011 ANSI/UL No. 60950-1, 2nd ed.; A1:2011 IEC 60950-1:2005 (2nd edition); Am 1:2009 EN 60950-1:2006/A11:2009/A1:2010/A12:2011 - Certification documents www.tracopower.com/overview/tmv2hi Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 TMV 2HI Series, 2 Watt Physical Specifications Casing material non-conducting FR4 (UL 94V-0 rated) Pin material tinned copper Package weight 2.4 g (0.085oz) Soldering temperature max. 260C / 10 s Outline Dimensions 3.2 (0.13) 0.5 (0.02) 10.2 (0.4) Pin-Out 0.5 (0.02) 2.4 2.54 (0.09) 2.54 2.54 7.62 (0.3) (0.1) (0.1) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 5 -Vout -Vout 6 No pin Common 7 +Vout +Vout 0.5 (0.02) (0.1) 19.5 (0.77) (0.30) 18.5 (0.73) Bottom view 0.5 (0.02) 7.5 7 (0.07) 6 1.8 5 (0.01) 2 0.25 1 Dimensions in mm (inch) Tolerances 0.5 (0.02) Pin pitch tolerances 0.25 (0.01) pins 0.05 (0.002) (c) Copyright 2018 Traco Electronic AG Specifications can be changed without notice! Rev. October 23, 2018 www.tracopower.com Page 3 of 3