R82 Loose MKT Series Taped METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - DIN 44122 MULTIPURPOSE APPLICATIONS Typical applications: by-passing, pulse coupling, blocking, coupling, decoupling, timing, oscillator circuits. PRODUCT CODE: R82 p = 5 mm Note: R82 series has replaced the R85 series (available only upon request). For new design we suggest the use of the R82 series. Construction: B 3.5 0.5 d0.05 0.6 R8 2 -Series code. d.c. rated voltage: D = 63V M= 400V S WOUND technology for Rated Voltage @ 50Vdc for size 7.2x13.0x7.2 mm only. GENERAL TECHNICAL DATA Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, epoxy resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking : manufacturer's logo, capacitance, tolerance, D.C. rated voltage. Climatic category: 55/100/56 IEC 60068-1 Operating temperature range: -55 to +105_C Related documents: IEC 60384-2; CECC 30400 Detail specifications: CECC 30401-011 PRODUCT CODE SYSTEM The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 C = 50V I = 250V STACKED technology for Rated Voltage from 50 to 400Vdc. >3.5 All dimensions are in mm Digit 1 to 3 Digit 4 S E = 100V Digit 5 Digit 6 to 9 Pitch: C = 5mm Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Digit 14 Capacitance tolerance: J=5%; K=10%; M=20% Winding scheme single sided metallized polyester film Table 1 (for more detailed information, please refer to page 14). Standard packaging style Lead length Ordering code (mm) (Digit 10 to 11) AMMO-PACK REEL 355mm Loose, short leads Loose, long leads DQ 4 +1.5 17 +1/-2 CK AA Z3 Note: Ammo-pack is the preferred packaging for taped version. 1/4 ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 Last revised in May 2001 E--MAIL: arcoven@arcotronics.com R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - DIN 44122 MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 a) STACKED technology b) WOUND technology a) 2.2mF B 6.0 H 11.0 L 7.2 p 5.0 Max dv/dt (V/ms) 100 b) 3.3mF 7.2 13.0 7.2 5.0 25 2.5 E3 R82CC 4330 --3 -- b) 4.7mF 7.2 13.0 7.2 5.0 25 2.5 E3 R82CC 4470 --3 -- Rated Cap Cap. 50Vdc/30Vac Max K0 (V2/ms) 10 E3 R82CC 4220 --7 -- Part Number Mechanical version and packaging (Table 1) Internal use Tolerance: J (5%); K (10%); M (20%) STACKED technology 0.10mF B 2.5 H 6.5 L 7.2 p 5.0 Max dv/dt (V/ms) 160 R82DC 3100 --5 -- 0.15mF 2.5 6.5 7.2 5.0 160 20 E3 R82DC 3150 --6 -- 0.22mF 2.5 6.5 7.2 5.0 160 20 E3 0.33mF 3.5 7.5 7.2 5.0 160 0.47mF 3.5 7.5 7.2 5.0 0.68mF 4.5 9.5 7.2 1.0mF 5.0 10.0 1.5mF 6.0 11.0 Rated Cap Cap. 6800pF B 2.5 H 6.5 L 7.2 p 5.0 Max dv/dt (V/ms) 250 0.010mF 2.5 6.5 7.2 5.0 250 125 E3 R82IC 2100 --5 -- R82DC 3220 --6 -- 0.015mF 2.5 6.5 7.2 5.0 250 125 E3 R82IC 2150 --5 -- 20 E3 R82DC 3330 --6 -- 0.022mF 3.5 7.5 7.2 5.0 250 125 E3 R82IC 2220 --5 -- 160 20 E3 R82DC 3470 --6 -- 0.033mF 3.5 7.5 7.2 5.0 250 125 E3 R82IC 2330 --5 -- 5.0 160 20 E3 R82DC 3680 --6 -- 0.047mF 4.5 9.5 7.2 5.0 250 125 E3 R82IC 2470 --5 -- 7.2 5.0 160 20 E3 R82DC 4100 --6 -- 0.068mF 4.5 9.5 7.2 5.0 250 125 E3 R82IC 2680 --5 -- 7.2 5.0 160 20 E3 R82DC 4150 --6 -- 0.10mF 5.0 10.0 7.2 5.0 250 125 E3 R82IC 3100 --5 -- 0.15mF 6.0 11.0 7.2 5.0 250 125 E3 R82IC 3150 --5 -- 0.22mF 6.0 11.0 7.2 5.0 250 125 E3 R82IC 3220 --6 -- Max K0 (V2/ms) 320 E3 R82MC1100 --5 -- 63Vdc/40Vac Max K0 (V2/ms) 20 E3 1000pF B 2.5 H 6.5 L 7.2 p 5.0 Max dv/dt (V/ms) 200 1500pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1150 --5 -- 2200pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1220 --5 -- 3300pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1330 --5 -- 4700pF 2.5 6.5 7.2 5.0 200 40 E3 6800pF 2.5 6.5 7.2 5.0 200 0.010mF 2.5 6.5 7.2 5.0 0.015mF 2.5 6.5 7.2 0.022mF 2.5 6.5 0.033mF 2.5 0.047mF Rated Cap Cap. 100Vdc/63Vac Rated Cap Cap. Part Number Max K0 (V2/ms) 40 E3 R82EC 1100 --5 -- Part Number 250Vdc/160Vac Max K0 (V2/ms) 125 E3 R82IC 1680 --5 -- Part Number 1000pF B 2.5 H 6.5 L 7.2 p 5.0 Max dv/dt (V/ms) 400 1500pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1150 --5 -- R82EC 1470 --5 -- 2200pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1220 --5 -- 40 E3 R82EC 1680 --5 -- 3300pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1330 --5 -- 200 40 E3 R82EC 2100 --5 -- 4700pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1470 --5 -- 5.0 200 40 E3 R82EC 2150 --5 -- 6800pF 3.5 7.5 7.2 5.0 400 320 E3 R82MC1680 --5 -- 7.2 5.0 200 40 E3 R82EC 2220 --5 -- 0.010mF 3.5 7.5 7.2 5.0 400 320 E3 R82MC2100 --5 -- 6.5 7.2 5.0 200 40 E3 R82EC 2330 --5 -- 0.015mF 4.5 9.5 7.2 5.0 400 320 E3 R82MC2150 --5 -- 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2470 --6 -- 0.022mF 4.5 9.5 7.2 5.0 400 320 E3 R82MC2220 --5 -- 0.068mF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2680 --6 -- 0.033mF 5.0 10.0 7.2 5.0 400 320 E3 R82MC2330 --5 -- 0.10mF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 3100 --7 -- 0.047mF 6.0 11.0 7.2 5.0 400 320 E3 R82MC2470 --5 -- 0.15mF 3.5 7.5 7.2 5.0 200 40 E3 R82EC 3150 --7 -- 0.068mF 6.0 11.0 7.2 5.0 400 320 E3 R82MC2680 --5 -- 0.22mF 3.5 7.5 7.2 5.0 200 40 E3 R82EC 3220 --7 -- 0.33mF 4.5 9.5 7.2 5.0 200 40 E3 R82EC 3330 --7 -- 0.47mF 4.5 9.5 7.2 5.0 200 40 E3 R82EC 3470 --7 -- 0.68mF 5.0 10.0 7.2 5.0 200 40 E3 R82EC 3680 --7 -- 1.0mF 6.0 11.0 7.2 5.0 200 40 E3 R82EC 4100 --7 -- Rated Cap Cap. 400Vdc/200Vac Part Number Mechanical version and packaging (Table 1) Internal use Tolerance: J (5%); K (10%); M (20%) Mechanical version and packaging (Table 1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Note 1: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. Note 2: Special version for high temperature applications (125C / RM2 series) is available upon request. Typical application: Engine control in AUTOMOTIVE FIELD. 2/4 ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 Last revised in May 2001 E--MAIL: arcoven@arcotronics.com R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - DIN 44122 MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 ELECTRICAL CHARACTERISTICS Rated voltage (VR): 050Vdc - 063Vdc - 100Vdc 250Vdc - 400Vdc Rated temperature (TR): +85_C Temperature derated voltage: for temperatures between +85_C and +105_C a decreasing factor of 1.25% per degree _C on the rated voltage VR has to be applied. Capacitance range: 1000pF to 4.7mF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): 7nH (lead length ~2mm) Dissipation factor (DF): tgx10-4 at +25_C 5_C kHz 1 10 100 C0.1mF 080 120 250 C>0.1mF 080 120 Temperature: Relative humidity (RH): Test duration: Performance +40_C2_C 93% 2% 56 days Capacitance change |C/C|: 5% DF change (tg): 50x10-4 at 1kHz Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: +100_C2_C 2000 h 1.25xVc Performance Capacitance change |C/C|: 5% DF change (tg): 30x10-4 at 10kHz for C1 mF 20x10-4 at 01kHz for C>1 mF Insulation resistance: 50% of initial limit. Resistance to soldering heat: Solder bath temperature: +260_C5_C Dipping time (with heat screen):10 s1 s Test conditions Performance For VR 100 Vdc Test conditions Test conditions Insulation resistance: Temperature: Voltage charge time: Voltage charge: TEST METHOD AND PERFORMANCE Damp heat, steady state: Performance +25_C5_C 1 min 50 Vdc for VR <100 Vdc 100 Vdc for VR 100 Vdc Capacitance change |C/C|: 2% DF change (tg): 30x10-4 at 10kHz for C1 mF 20x10-4 at 01kHz for C>1 mF Insulation resistance: initial limit. Long term stability (after two years): 15000M for C 0.33mF 5000 s for C >0.33mF and 1mF 1000 s for C >1mF Storage standard environmental conditions (see page 10). Performance For VR >100 Vdc Capacitance change |C/C|: 3% for C0.1mF 2% for C>0.1mF RELIABILITY Reference MIL HDB 217 30000M Test voltage between terminals: 1.4xVR applied for 2 s at +25_C5_C Application conditions: Temperature: +40_C2_C Voltage: 0.5xVR Failure rate: 1 FIT (1 FIT = 1x10-9 failures/componentsxh) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |C/C|: >10% DF change (tg): >2xinitial limit. Insulation resistance: <0.005xinitial limit. 3/4 ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 Last revised in May 2001 E--MAIL: arcoven@arcotronics.com R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - DIN 44122 MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Vrms [V] 100 Vrms [V] 100 50 Vdc / 30 Vac 2.2F - p = 5 10 63 Vdc / 40 Vac 10 1 0.1F - p = 5 0.47F - p = 5 1F - p = 5 1 0.1 Vrms [V] 100 1 10 100 f [kHz] 0.1 Vrms [V] 1000 100 Vdc / 63 Vac 0.01F - p = 5 0.047F - p = 5 0.33F - p = 5 10 1 10 100 f [kHz] 250 Vdc / 160 Vac 100 0.01F - p = 5 0.047F - p = 5 0.15F - p = 5 1 10 0.1 Vrms [V] 1000 1 10 100 f [kHz] 0.1 1 10 100 f [kHz] 400 Vdc / 200 Vac 100 0.0047F - p = 5 0.01F - p = 5 0.047F - p = 5 10 0.1 1 10 100 f [kHz] Note: p (pitch) in mm. 4/4 ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 Last revised in May 2001 E--MAIL: arcoven@arcotronics.com