• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Multilayer Diplexers
For GSM850/PCS Tx & Rx
DPX Series
Type:
Issue date:
DPX205850DT-4032A1 (2.0×1.25×0.95mm)
DPX201990DT-4114A2 (2.0×1.25×0.95mm)
DPX201990DT-4014A2 (2.0×1.25×0.95mm)
December 2010
(1/6)
001-02 / 20101204 / e741_multi_dpx03
• All specifications are subject to change without notice.
Multilayer Chip Diplexers
For GSM850/PCS Tx & Rx
DPX Series DPX205850DT-4032A1
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
ELECTRICAL CHARACTERISTICS
• Ta: +25°C
Item Port Frequency range Minimum value Typical value Maximum value
Insertion loss ANT Lo-band 800 to 2170MHz (dB) — 1.51 3.0
ANT Hi-band 2400 to 5850MHz (dB) — 1.36 3.0
Attenuation ANT Lo-band 2400 to 5850MHz (dB) 8.0 12.7 —
ANT Hi-band 800 to 2170MHz (dB) 8.0 11.5 —
Temperature range Operating (°C) –40 — +85
Storage (°C) –40 — +85
Conformity to RoHS Directive
0.95±0.1
1.25±0.15
0.3±0.2
0.2±0.2 0.35±0.2
2.0±0.15
Dimensions in mm
0.65±0.2
654
123
1 GND
2 ANT
3 GND
4 High Band
5 GND
6 Low Band
Terminal functions
0.9320.58
0.77
0.32
0.33
ø0.3 thruough hole
Land Solder resist Dimensions in mm
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/6)
001-02 / 20101204 / e741_multi_dpx03
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Lo-BAND PORT ATTENUATION S21
COMMON PORT RETURN LOSS S11
Lo-BAND PORT RETURN LOSS S22
Hi-BAND PORT ATTENUATION S31
ISOLATION S23
Hi-PORT RETURN LOSS S33
Attenuation(dB)
Frequency(MHz)
1: 800MHz
–0.38dB
2: 2170MHz
–1.51dB
3: 2400MHz
–12.7dB
4: 5850MHz
–38.3dB
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
500 1500 2500 3500 4500 5500
3
4
12
Frequency(MHz)
1: 800MHz
–13.4dB
2: 2170MHz
–21.9dB
3: 2400MHz
–20.0dB
4: 5850MHz
–7.1dB
500 1500 2500 3500 4500 5500
Return loss(dB)
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
3
4
1
2
Frequency(MHz)
1: 800MHz
–13.5dB
2: 2170MHz
–21.1dB
3: 2400MHz
–2.4dB
4: 5850MHz
0.6dB
500 1500 2500 3500 4500 5500
–15
–20
–5
0
–10
–35
–30
–25
Return loss(dB)
34
1
2
Frequency(MHz)
1: 800MHz
–20.3dB
2: 2170MHz
–11.5dB
3: 2400MHz
–1.36dB
4: 5850MHz
–1.12dB
500 1500 2500 3500 4500 5500
Attenuation(dB)
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
34
1
2
Frequency(MHz)
1: 800MHz
–19.0dB
2: 2170MHz
–12.8dB
3: 2400MHz
–13.7dB
4: 5850MHz
–38.9dB
500 1500 2500 3500 4500 5500
Isolation(dB)
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
3
4
1
2
Frequency(MHz)
1: 800MHz
–0.2dB
2: 2170MHz
–1.7dB
3: 2400MHz
–16.5dB
4: 5850MHz
–7.3dB
500 1500 2500 3500 4500 5500
–15
–20
–5
0
–10
–35
–30
–25
Return loss(dB)
3
4
12
(3/6)
001-02 / 20101204 / e741_multi_dpx03
• All specifications are subject to change without notice.
Multilayer Chip Diplexers
For GSM850/PCS Tx & Rx
DPX Series DPX201990DT-4114A2
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
Line width be designed to match 50Ω characteristic impedance
depending on PCB material and thickness.
ELECTRICAL CHARACTERISTICS
Item Port Frequency range Minimum value Typical value Maximum value
Insertion loss
Lo-band [–40 to +85°C] 824 to 894MHz (dB) — — 0.5
Hi-band [–40 to +85°C] 1850 to 1990MHz (dB) — — 0.55
Lo-band [25°C] 824 to 894MHz (dB) — — 0.45
Hi-band [25°C] 1850 to 1990MHz (dB) — — 0.5
Return loss ANT 824 to 894, 1850 to 1990MHz (dB) 10.0 — —
Attenuation
Hi-band 824 to 894MHz (dB) 19.0 — —
Lo-band 1850 to 1990MHz (dB) 20.0 — —
Lo-band 1648 to 1788MHz(AGSM 2f0) (dB) 10.0 — —
Lo-band 2472 to 2682MHz(AGSM 3f0) (dB) 28.0 — —
Power capability (W)——3.0
Temperature range Operating (°C) –40 — +85
Storage (°C) –40 — +85
Conformity to RoHS Directive
0.95±0.1 1.25±0.15
0.3±0.2
0.2±0.2 0.35±0.2
2.0±0.15
Dimensions in mm
0.65±0.2
654
123
1 GND
2 ANT
3 GND
4 Lo-Band
5 GND
6 Hi-Band
Terminal functions
0.7
0.6
Land pattern
0.8
ø0.15 Through-hole(6)
Dimensions in mm
0.35 0.3
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(4/6)
001-02 / 20101204 / e741_multi_dpx03
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Hi-BAND PORT S21
COMMON PORT RETURN LOSS S11
Hi-BAND PORT RETURN LOSS S22
Lo-BAND PORT S31
ISOLATION S23
Lo-PORT RETURN LOSS S33
SMITH CHARTS
S11 S22 S33 S21 S31
Attenuation(dB)
Frequency(MHz)
1: 824.000MHz
–49.54dB
2: 894.000MHz
–31.59dB
3: 1850.000MHz
–0.38dB
6: 1990.000MHz
–0.27dB
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
300 1300 2300 3300 4300 5300
3 4
1
2
Frequency(MHz)
–35
300 1300 2300 3300 4300 5300
–15
–20
–5
–10
0
–30
–25
Return loss(dB)
1: 824.000MHz
–16.26dB
2: 894.000MHz
–16.50dB
3: 1850.000MHz
–17.86dB
4: 1990.000MHz
–22.99dB
123
4
Frequency(MHz)
300 1300 2300 3300 4300 5300
–15
–20
–5
–10
0
–35
–30
–25
Return loss(dB)
1: 824.000MHz
–0.36dB
2: 894.000MHz
–0.42dB
3: 1850.000MHz
–17.78dB
4: 1990.000MHz
–23.65dB
12
3
4
Attenuation(dB)
Frequency(MHz)
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
300 1300 2300 3300 4300 5300
1: 824.000MHz
–0.29dB
2: 894.000MHz
–0.33dB
3: 1648.000MHz
–17.91dB
4: 1788.000MHz
–33.29dB
5: 1850.000MHz
–31.70dB
6: 1990.000MHz
–28.81dB
7: 2472.000MHz
–33.28dB
8: 2882.000MHz
–38.15dB
12
3
45
6
7
8
Attenuation(dB)
Frequency(MHz)
1: 824.000MHz
–42.79dB
2: 894.000MHz
–30.66dB
3: 1850.000MHz
–33.76dB
4: 1990.000MHz
–29.05dB
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
300 1300 2300 3300 4300 5300
1
3
24
Frequency(MHz)
300 1300 2300 3300 4300 5300
–15
–20
–5
–10
0
–35
–30
–25
Return loss(dB)
1: 824.000MHz
–16.14dB
2: 894.000MHz
–16.28dB
3: 1850.000MHz
–0.80dB
4: 1990.000MHz
–0.55dB
12
34
(5/6)
001-02 / 20101204 / e741_multi_dpx03
• All specifications are subject to change without notice.
Multilayer Chip Diplexers
For AGSM/PCS Tx/Rx
DPX Series DPX201990DT-4014A2
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERNS
Line width be designed to match 50Ω characteristic impedance
depending on PCB material and thickness.
ELECTRICAL CHARACTERISTICS
Item Port Frequency range Minimum value Typical value Maximum value
Insertion loss
Lo-band [–40 to +85°C] 824 to 894MHz (dB) — — 0.5
Hi-band [–40 to +85°C] 1850 to 1990MHz (dB) — — 0.55
Lo-band [25°C] 824 to 894MHz (dB) — — 0.45
Hi-band [25°C] 1850 to 1990MHz (dB) — — 0.5
Return loss ANT 824 to 894, 1850 to 1990MHz (dB) 10.0 — —
Attenuation
Hi-band 824 to 894MHz (dB) 19.0 — —
Lo-band 1850 to 1990MHz (dB) 20.0 — —
Lo-band 1648 to 1788MHz(AGSM 2f0) (dB) 10.0 — —
Lo-band 2472 to 2682MHz(AGSM 3f0) (dB) 28.0 — —
Power capability (W)——3.0
Temperature range Operating (°C) –40 — +85
Storage (°C) –40 — +85
Conformity to RoHS Directive
0.95±0.1
1.25±0.15
0.3±0.2
0.2±0.2 0.35±0.2
2.0±0.15
Dimensions in mm
0.65±0.2
654
123
1 GND
2 ANT
3 GND
4 HIGH
5 GND
6 LOW
Terminal functions
0.7
0.6
Land pattern
0.8
ø0.15 Through-hole
Dimensions in mm
0.35 0.3
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(6/6)
001-02 / 20101204 / e741_multi_dpx03
• All specifications are subject to change without notice.
FREQUENCY CHARACTERISTICS
Lo-BAND PORT S21
COMMON PORT RETURN LOSS S11
Lo-BAND PORT RETURN LOSS S22
Hi-BAND PORT S31
ISOLATION S23
Hi-PORT RETURN LOSS S33
SMITH CHARTS
S11 S22 S33 S21 S31
Attenuation(dB)
Frequency(MHz)
1: 824.000MHz
–0.29dB
2: 894.000MHz
–0.32dB
3: 1648.000MHz
–14.38dB
4: 1788.000MHz
–29.87dB
5: 1850.000MHz
–32.30dB
6: 1990.000MHz
–28.26dB
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
3
4
5
1 2
6
300 1300 2300 3300 4300 5300
Frequency(MHz)
–35
300 1300 2300 3300 4300 5300
–15
–20
–5
–10
0
–30
–25
Return loss(dB)
1: 824.000MHz
–17.49dB
2: 894.000MHz
–17.89dB
3: 1850.000MHz
–25.85dB
4: 1990.000MHz
–40.51dB
12
3
Frequency(MHz)
300 1300 2300 3300 4300 5300
–15
–20
–5
–10
0
–35
–30
–25
Return loss(dB)
1: 824.000MHz
–17.31dB
2: 894.000MHz
–17.80dB
3: 1850.000MHz
–0.77dB
4: 1990.000MHz
–0.57dB
12
34
Attenuation(dB)
Frequency(MHz)
1: 824.000MHz
–38.76dB
2: 894.000MHz
–2.81dB
3: 1850.000MHz
–0.33dB
4: 1990.000MHz
–0.29dB
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
1
2
300 1300 2300 3300 4300 5300
34
Attenuation(dB)
Frequency(MHz)
1: 824.000MHz
–37.14dB
2: 894.000MHz
–27.80dB
3: 1850.000MHz
–37.54dB
4: 1788.000MHz
–29.13dB
–15
–20
–5
0
–10
–45
–50
–35
–40
–30
–25
13
24
300 1300 2300 3300 4300 5300
Frequency(MHz)
300 1300 2300 3300 4300 5300
–15
–20
–5
–10
0
–35
–30
–25
Return loss(dB)
1: 824.000MHz
–0.38dB
2: 894.000MHz
–0.44dB
3: 1850.000MHz
–20.77dB
4: 1990.000MHz
–23.40dB
12
34
