1-1393115-0 - TE CONNECTIVITY

General Purpose Relays

Industrial Relays

KUIP/KUGP Series Panel Plug-in Relay

08-2011, Rev. 0811

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Coil versions, DC coil

Coil Rated Operate Coil Rated coil

code voltage voltage resistance power

VDC VDC Ω±10% W

KUIP

5 5 3.75 21 1.2

6 6 4.5 32.1 1.125

12 12 9.0 120 1.2

24 24 18.0 472 1.25

48 48 36.0 1800 1.3

110 110 82.5 10000 1.25

KUGP

5 5 3.75 14 1.8

6 6 4.5 20 1.8

12 12 9.0 80 1.8

24 24 18.0 320 1.8

48 48 36.0 1250 1.85

110 110 82.5 6720 1.8

All ﬁgures are given for coil without preenergization, at ambient temperature +23°C.

Coil versions, AC coil

Coil Rated Operate Coil Rated coil

code voltage voltage resistance power

VAC VAC Ω±15% VA

KUIP 1 and 2 pole

6 6 5.1 6 2.0

12 12 10.2 24 2.0

24 24 20.4 85 2.0

120 120 102.0 2250 2.1

240 240 204.0 9110 2.1

KUIP 3 pole, KUGP

6 6 5.1 4.2 2.8

12 12 10.2 18 2.8

24 24 20.4 72 2.8

120 120 102.0 1700 2.9

240 240 204.0 7200 2.9

All ﬁgures are given for coil without preenergization, at ambient temperature +23°C.

Insulation Data KUIP KUGP

Initial dielectric strength

between open contacts 1200Vrms 3500Vrms

between contact and coil 2200Vrms 3750Vrms

between adjacent contacts 2200Vrms 3750Vrms

Initial insulation resistance

between insulated elements 100MΩ, 500VDC

n 10 amp rated relays

n 2 Form A (NO) and 1-3 Form C (CO) contact arrangement

n KUIP 8mm coil-to-contact spacing and KUGP 3mm contact gap

n Various mounting and socket styles

Typical applications

Voltage control units

Approvals

UL E22575; CSA LR15734

Technical data of approved types on request

Contact Data

Contact arrangement

KUGP: 2 form A (NO); 3 form A (NO)

KUIP:

1 form C (CO), 2 form A (NO), 2 form C (CO), 3 form C (CO)

Rated voltage 240VAC

Rated current 10A

Contact material Ag AgCdO

Min recommended contact load 100mA, 12VDC 300mA, 12VDC

Frequency of operation 360 ops./hour 360 ops./hour

Operate/releases time max. 20/15ms

Bounce time max. 20ms

Contact ratings

Type Load Cycles

UL 508

5A, 240VAC

5A, 28VDC

1/6HP, 120VAC

2.5A, 120VAC, tungsten

1/3HP, 240VAC

0.5A, 120VDC

5FLA, 15LRA, 250VAC

AgCdO

10A, 240VAC

10A, 32VDC

5FLA, 15LRA, 250VAC

1/3HP, 120VAC

5A, 120VAC, tungsten

1/2HP, 250VAC

0.5A, 125VDC

10FLA, 40LRA, 125VAC

3A, 600VAC

1/2HP, 480VAC

1/2HP, 600VAC

1HP, 480VAC, 3 phase

Mechanical endurance 10x106 ops.

Coil Data

Coil voltage range 6 to 110VDC

6 to 240VAC

Coil insulation system according UL Class B

General Purpose Relays

Industrial Relays

KUIP/KUGP Series Panel Plug-in Relay (Continued)

08-2011, Rev. 0811

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Accessories

For details see datasheet Sockets and Accessories, KUP Relays

Product Code Description

27E893 DIN socket (use 20C318 clip)

27E121 Track mount socket (use 20C314 clips)

27E043 Chassis mount/solder eyelet socket (use 20C254 clip)

27E046 Chassis mount/PCB socket (use 20C254 clip)

27E067 Chassis mount/quick connect socket (use 20C254 clip)

27E396 Snap-in/quick connect socket (use 20C254 clip)

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Ambient temperature

DC coil KUIP: -45ºC to 95ºC

KUGP: -45ºC to 75ºC (1 & 2 pole)

AC coil KUIP: -45ºC to 70ºC

KUGP: -45ºC to 70ºC (1 & 2 pole)

Category of environmental protection

IEC 61810 RTI - dust protected

Terminal type Quick connects (QC) .187

PCB-THT

Terminal retention, push force 25 lbs for 3s

Weight 85g

Packaging/unit tray/25 pcs., box/150pcs.

Dimensions

Plain case Bracket mount case

1.906 MAX.

(48.41)

1.531 MAX.

(38.89)

1 2 3

4 5 6

7 8 9

1.406 MAX.

(35.71)

1 2 3

4 5 6

7 8 9

A B

1.518 MAX.

(38.56)

1.373 ± .010

(34.87 ± .25)

1.713 ± .003

(43.51 ± .08)

1.989 ± .0 03

(50.52)

.178 TYP.

(4.52)

2.248 MAX.

(57.10)

.078 TYP.

(1.98)

1.906 MAX.

(48.41)

.75

(19.1)

2.90 MAX.

(73.7)

.078 R. TYP.

(1.98)

1.531 MAX.

(38.89)

.312

TYP.

(7.92)

.375

(9.53) .437

(11.10)

2.500

(63.50)

.625 TYP.

(15.88)

.06

(1.52)

1.406 MAX.

(35.71)

.07

(1.8)

X Is For Terminal Dimensions.

See Teminal Drawings.

Top ﬂange case PCB layout

Bottom view on solder pins

3 Form C shown

Omit unncessary holes for other contact forms

.626

(15.90)

.328

(8.33)

.437

(11.10)

.875

(22.23)

.076 DIA. TYP.

(1.93)

.206

(5.23)

General Purpose Relays

Industrial Relays

KUIP/KUGP Series Panel Plug-in Relay (Continued)

08-2011, Rev. 0811

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Terminal assignment

1 Form C 2 Form C 3 Form C

2 Form A (delete 1 & 3) 3 Form A (delete 1, 2 & 3)

Product code structure Typical product code KUIP -5 A 5 5 -120

Type

KUIP Enclosed relay with 8mm contact to coil spacing

KUGP Enclosed relay with 3mm open contact spacing and 8mm contact to coil spacing (form A only)

Contact arrangement and rating

5 1 form C (1 CO) 1) 7 2 form A (2 NO)

11 2 form C (2 CO) 1) 12 3 form A (3 NO)

14 3 form C (3 CO) 1)

1) not available on KUGP type

Coil Input

A AC, 50/60Hz D DC

Mounting and options

1 Socket mount (plain) case 5 Bracket mount case

T Top ﬂange case

Terminal and contact material

3 1.19mm (.047in) PCB, Ag 5 4.75mm (.187in) quick connect/solder; AgCdO

7 1.19mm (.047in) PCB, AgCdO

Coil voltage

Coil code: please refer to coil versions table

Product Code Arrangement Material Coil Terminals Mounting Part Number

KUGP-7D55-24 2 Form A, 2 NO AgCdO 24 VDC 4.75mm (.187in) QC Bracket mount case 2-1393114-4

KUIP-5A55-120 1 Form C; 1 CO 120 VAC 2-1393115-0

KUIP-11D55-12 2 Form C; 2 CO 12 VDC 1-1393115-0

KUIP-11D55-24 24 VDC 1-1393115-1

KUIP-14A15-120 3 Form C; 3 CO 120 VAC Socket mount, plain case 1-1393115-4

KUIP-14D15-12 12 VDC 1-1393115-6

KUIP-14D15-24 24 VDC 1-1393115-7

Terminal dimensions

4.75mm (.187) quick connect 1.19mm (.047) printed circuit

.156

(3.96)

.032

(.81)

THICKNESS

.093

(2.36)

HEADER

.237

(6.02)

.268 REF.

(6.81)

.047

(1.19)

.180

(4.57)

.156

(3.96)

.125

(3.18)

.078

(1.98)

.187±.002

(4.75±.05)

.250

(6.35)

281 REF.

(7.14)

THICKNESS

.020

(.51)

HEADER