14.2 mm (0.56 inch) Seven Segment Displays HDSP-K40x Series HDSP-550x Series HDSP-552x Series HDSP-560x Series HDSP-562x Series HDSP-570x Series HDSP-572x Series HDSP-H15x Series HDSP-H40x Series Technical Data Features * Industry Standard Size * Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers * Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green, Orange * Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast 50 Viewing Angle * Design Flexibility Common Anode or Common Cathode Single and Dual Digits Right Hand Decimal Point 1. Overflow Character * Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display * High Light Output * High Peak Current * Excellent for Long Digit String Multiplexing * Intensity and Color Selection Option See Intensity and Color Selected Displays Data Sheet * Sunlight Viewable AlGaAs Description The 14.2 mm (0.56 inch) LED seven segment displays are designed for viewing distances up to 7 metres (23 feet). These devices use an industry standard size package and pinout. Both the numeric and 1 overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. Devices Orange AlGaAs Red HER HDSP- HDSP-[1] HDSP-[1] Yellow HDSP- Green HDSP- Description Package Drawing H401 H151 5501 5701 5601 Common Anode Right Hand Decimal A H403 H153 5503 5703 5603 Common Cathode Right Hand Decimal B H157 5507 5707 5607 Common Anode 1. Overflow C H158 5508 5708 5608 Common Cathode 1. Overflow D K401 5521 5721 5621 Two Digit Common Anode Right Hand Decimal E K403 5523 5723 5623 Two Digit Common Cathode Right Hand Decimal F Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation. 2 These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal for portable applications. For additional information see the Low Current Seven Segment Displays data sheet. Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 Package Dimensions PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A CATHODE e CATHODE d ANODE[3] CATHODE c CATHODE DP CATHODE b CATHODE a ANODE[3] CATHODE f CATHODE g B ANODE e ANODE d CATHODE[4] ANODE c ANODE DP ANODE b ANODE a CATHODE[4] ANODE f ANODE g C CATHODE c ANODE c, d CATHODE b ANODE a, b, DP CATHOPDE DP CATHODE a ANODE a, b, DP ANODE c, d CATHODE d NO PIN FUNCTION D ANODE c CATHODE c, d ANODE b CATHODE a, b, DP ANODE DE ANODE a CATHODE a, b, DP CATHODE c, d ANODE d NO PIN NOTES: 1. ALL DIMENSIONS IN MILLIMETRES (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. E E CATHODE NO. 1 D CATHODE NO. 1 C CATHODE NO. 1 DP CATHODE NO. 1 E CATHODE NO. 1 D CATHODE NO. 2 G CATHODE NO. 2 C CATHODE NO. 2 DP CATHODE NO. 2 B CATHODE NO. 2 A CATHODE NO. 2 F CATHODE NO. 2 DIGIT NO. 2 ANODE DIGIT NO. 1 ANODE B CATHODE NO. 1 A CATHODE NO. 1 G CATHODE NO. 1 F CATHODE NO. 1 F E ANODE NO. 1 D ANODE NO. 1 C ANODE NO. 1 DP ANODE NO. 1 E ANODE NO. 2 D ANODE NO. 2 G ANODE NO. 2 C ANODE NO. 2 DP ANODE NO. 2 B ANODE NO. 2 A ANODE NO. 2 F ANODE NO. 2 DIGIT NO. 2 CATHODE DIGIT NO. 1 CATHODE B ANODE NO. 1 A ANODE NO. 1 G ANODE NO. 1 F ANODE NO. 1 3. REDUNDANT ANODES. 4. REDUNDANT CATHODES. 5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY. 4 Internal Circuit Diagram Absolute Maximum Ratings AlGaAs Red HDSP-H150 Series HER/Orange HDSP-5500 HDSP-H40x HDSP-K40x Series Yellow HDSP-5700 Series Green HDSP-5600 Series Units 96 105 80 105 mW Peak Forward Current per Segment or DP 160[1] 90[3] 60[5] 90[7] mA DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 3018] mA Description Average Power per Segment or DP Operating Temperature Range -20 to +100[9] -40 to +100 C -55 to +100 C Reverse Voltage per Segment or DP 3.0 V Lead Solder Temperature for 3 Seconds (1.60 mm [0.063 in.] below seating plane) 260 C Storage Temperature Range Notes: 1. See Figure 2 to establish pulsed conditions. 2. Derate above 46C at 0.54 mA/C. 3. See Figure 7 to establish pulsed conditions. 4. Derate above 53C at 0.45 mA/C. 5. See Figure 8 to establish pulsed conditions. 6. Derate above 81C at 0.52 mA/C. 7. See Figure 9 to establish pulsed conditions. 8. Derate above 39C at 0.37 mA/C. 9. For operation below -20C, contact your local Agilent components sales office or an authorized distributor. 5 Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series HDSP- Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2,5] (Digit Average) IV 9.1 16.0 Forward Voltage/Segment or DP VF Max. Units mcd Test Conditions IF = 20 mA IF = 20 mA 1.8 V 2.0 3.0 IF = 100 mA H15X Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] PEAK 645 nm d 637 nm 15 V VR 3.0 Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin R J-Pin 400 C/W/ Seg IR = 100 A High Efficiency Red Device Series HDSP- Parameter Symbol Min. Typ. 900 2800 Max. Units cd Luminous Intensity/Segment[1,2,6] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 PEAK 635 nm d 626 nm 30 V 55XX Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] 3700 VR 3.0 Test Conditions IF = 10 mA IF = 60 mA Peak: 1 of 6 df 2.5 V Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin R J-Pin 345 C/W/ Seg IF = 20 mA IR = 100 A 6 Yellow Device Series HDSP- Parameter Symbol Min. Typ. 600 1800 Max. Units cd Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 PEAK 583 2750 Test Conditions IF = 10 mA IF = 60 mA Peak: 1 of 6 df 2.5 V IF = 20 mA 57XX Peak Wavelength nm Dominant Wavelength[3,7] d 581.5 586 Reverse Voltage/Segment or DP[4] VR 3.0 40 V 592.5 nm Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin R J-Pin 345 C/W/ Seg IR = 100 A Orange Device Series HDSP- Parameter Symbol K40x Typ. Max. Units Test Conditions Luminous Intensity/Segment (Segment Average)[1,2] IV 2.37 Forward Voltage/Segment or DP VF 2.1 PEAK 600 nm d 603 nm IF = 10 mA 30 V IR = 100 A Peak Wavelength H40x Min. Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] VR 3.0 2.5 mcd IF = 10 mA V IF = 20 mA Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin R J-Pin 345 C/W/ Seg 7 High Performance Green Device Series HDSP- Parameter Symbol Min. Typ. 900 2500 Max. Units cd Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 PEAK 566 Dominant Wavelength[3,7] d 571 Reverse Voltage/Segment or DP[4] VR 3100 Test Conditions IF = 10 mA IF = 60 mA Peak: 1 of 6 df 2.5 V IF = 10 mA 56XX Peak Wavelength 3.0 nm 577 nm 50 V Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin R J-Pin 345 C/W/ Seg IR = 100 A Notes: 1. Device case temperature is 25C prior to the intensity measurement. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series. 6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series. 7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. AlGaAs Red Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration - Red. Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration - AlGaAs Red. 50 IF - FORWARD CURRENT PER SEGMENT - mA IDC MAX. - MAXIMUM DC CURRENT PER SEGMENT - mA 8 RJ-A = 770C/W 45 AlGaAs RED 40 35 30 25 20 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 140 120 AlGaAs RED 100 80 60 40 20 0 0 1.75 1.50 1.25 1.00 AlGaAs RED 0.75 0.50 0.25 0 5 10 15 20 25 30 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Figure 4. Forward Current vs. Forward Voltage. PEAK - NORMALIZED RELATIVE EFFICIENCY 2.00 0 0.5 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C Figure 3. Maximum Allowable DC Current vs. Ambient Temperature. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 160 35 40 IF - FORWARD CURRENT PER SEGMENT - mA Figure 5. Relative Luminous Intensity vs. DC Forward Current. 1.4 1.2 1.0 AlGaAs RED 0.8 0.6 0.5 5.0 50.0 150.0 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. HER, Yellow, Green, Orange Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration - HER, Orange. Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration - Yellow. 9 50 R J-A = 770C/W IDC MAX - MAXIMUM DC CURRENT PER SEGMENT - mA 45 40 35 30 HER, ORANGE 25 GREEN 20 YELLOW 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 T A - AMBIENT TEMPERATURE - C Figure 10. Maximum Allowable DC Current vs. Ambient Temperature. 90 V - RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA PER SEGMENT) 4.0 GREEN SERIES 80 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10 mA) IF - FORWARD CURRENT PER SEGMENT - mA Figure 9. Maximum Tolerable Peak Current vs. Pulse Duration - Green. 70 60 YELLOW SERIES 50 HER SERIES, ORANGE SERIES 40 30 20 10 0 1 2 3 4 5 VF - FORWARD VOLTAGE - V Figure 11. Forward Current vs. Forward Voltage. 3.5 3.0 2.5 2.0 HER, YELLOW, GREEN, ORANGE 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 IF - DC FORWARD CURRENT - mA Figure 12. Relative Luminous Intensity vs. DC Forward Current. Electrical/Optical For more information on electrical/optical characteristics, please see Application Note 1005. Contrast Enhancement For information on contrast enhancement please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro- ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. 1.6 YELLOW SERIES 1.5 HER SERIES, ORANGE SERIES 1.4 1.3 GREEN SERIES 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0 10 20 30 40 50 60 70 80 90 100 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 10 Orange Intensity Bin Limits (mcd) AlGaAs Red HDSP-H15x IV Bin Category Min. K 9.20 L 13.80 M 20.70 N 31.10 O 46.60 Max. 16.90 25.30 38.00 56.90 85.40 HDSP-H40x/K40x IV Bin Category Min. B 0.77 C 0.95 D 1.19 E 1.49 F 1.85 G 2.32 H 2.90 Max. 1.17 1.45 1.82 2.27 2.89 3.54 4.43 HER HDSP-550x/552x IV Bin Category Min. E 0.91 F 1.37 G 2.05 H 3.08 I 4.62 J 6.93 K 10.39 Max. 1.67 2.51 3.76 5.64 8.64 12.70 19.04 Color Categories Color Yellow Yellow HDSP-570x/572x IV Bin Category Min. D 0.61 E 0.91 F 1.37 G 2.05 H 3.08 I 4.62 J 6.93 K 10.39 Green Max. 1.11 1.67 2.51 3.76 5.64 8.64 12.70 19.04 Green IV Bin Category E F G H I HDSP-560x/562x Min. 0.91 1.37 2.05 3.08 4.61 Max. 1.67 2.51 3.76 5.64 8.46 Bin 1 3 2 4 2 3 4 5 Dominant Wavelength (nm) Min. Max. 581.50 585.00 584.00 587.50 586.50 590.00 589.00 592.50 573.00 577.00 570.00 574.00 567.00 571.00 564.00 568.00 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-0383EN January 17, 2002 5988-4273EN