132
Series 95 12.1 mm 15.2 mm 18.4 mm IP40 50 mA 48 VDC
Choose one component from each of the coloured sections to assemble a complete switch.
For other options or further information please contact your local sales office.
PUSHBUTTON
Product Profile
The Series 95 is a high quality switch range
containing illuminated and non-illuminated
pushbuttons. The switching elements are
equiped with goldplated, self cleaning and
momentary contact elements.
Technical data see page 135
IP40 Protection •
Switch Rating, 50 mA, 48 VDC •
Suitable for mounting on PCB’s with •
thickness of 1.5 to 2.5 mm
Switch held during the soldering •
process by the spring clip contacts
Illumination using SMD LED’s with PLCC •
housing (height 2.1 mm) and a radiation
angle of approx. 120°
Lenses available matt translucent or clear •
transparent in flat, concave or convex
Available sizes are: 12.1 mm, 15.2 mm •
and 18.4 mm square
Greater than 5 million switch cycles•
Independent illumination allows for flexibility•
Silent operation as required in some audio/•
video applications and light and stage
technology
Illuminated pushbutton
Illuminated pushbutton, front measurement 12.1 x 12.1 mm,
plastic lens colourless trans parent, PCP measurement
12.7 x 12.7 mm, 1 NO, IP40
Part No. Finish Shape
95-313.720 Matt Flush
95-313.750 Clear Flush
Illuminated pushbutton
Illuminated pushbutton, front measurement 18.4 x 18.4 mm,
plastic lens colourless trans parent, PCP measurement
19.05 x 19.05 mm, 1 NO, IP40
Part No. Finish Shape
95-414.740 Matt Concave
95-414.720 Matt Concave
95-414.770 Clear Concave
95-414.750 Clear Flush
Accessories
Diffuser, 12.1 mm x 12.1 mm (small)
Part No.
Red 95-803.220
Yellow 95-803.420
Orange 95-803.320
Green 95-803.520
Blue 95-803.620
White 95-803.920 standard
Illuminated pushbutton, front measurement 15.2 x 15.2 mm,
plastic lens colourless trans parent, PCP measurement
15.88 x 15.88 mm, 1 NO, IP40
Part No. Finish Shape
95-515.740 Matt Concave
95-515.720 Matt Flush
95-515.770 Clear Concave
95-515.750 Clear Flush
133
Series 95
12.1 mm 15.2 mm 18.4 mm IP40 50 mA 48 VDC
ELEMENT LED ACCESSORIES
Choose one component from each of the coloured sections to assemble a complete switch.
For other options or further information please contact your local sales office.
Front measurements, 18.4 mm x 18.4 mm (medium)
PCP measurements 19.05 mm x 19.05 mm
Part No.
95-414.000
Diffuser, 15.2 mm x 15.2 mm (medium)
Part No.
Red 95-805.220
Yellow 95-805.420
Orange 95-805.320
Green 95-805.520
Blue 95-805.620
White 95-805.920 standard
Accessories
Diffuser, 18.4 mm x 18.4 mm (large)
Part No.
Red 95-804.220
Yellow 95-804.420
Orange 95-804.320
Green 95-804.520
Blue 95-804.620
White 95-804.920 standard
Switching element
Front measurements, 12.1 mm x 12.1 mm (small)
PCP measurements 12.7 mm x 12.7 mm
Part No.
95-313.000
Front measurements, 15.2 mm x 15.2 mm (medium)
PCP measurements 15.88 mm x 15.88 mm
Part No.
95-515.000
Switching element LED
Please note that EAO does not offer LED's for this product.
The required specification is detailed below
SMD-LED type:
P-LCC package or similar, radiation angle approx. 120º
use of smaller SMD-LED is possible.
SMD-LED configurations:
max. 2 SMD-LED's (switch size 12.7 mm)
max. 3 SMD-LED's (switch size 15.88 mm or 19.05 mm)
single colour or multi colour
Height of SMD-LED:
max. 2.1 mm
134
1
2
Series 95 12.1 mm 15.2 mm 18.4 mm IP40 50 mA 48 VDC
Choose one component from each of the coloured sections to assemble a complete switch.
For other options or further information please contact your local sales office.
PUSHBUTTON
Accessories
Lens flat, matt translucent or clear transparent,
18.4 mm x 18.4 mm (large)
Colour Part No. Lens shape Lens material
Neutral 95-704.720 Flat Matt transparent
Neutral 95-704.750 Flat Clear transparent
Neutral 95-704.740 Concave Matt transparent
Neutral 95-704.770 Concave Clear transparent
Neutral 95-704.730 Convex Matt transparent
Neutral 95-704.760 Convex Clear transparent
Accessories
Lens flat, matt translucent or clear transparent,
12.1 mm x 12.1 mm (small)
Colour Part No. Lens shape Lens material
Neutral 95-703.720 Flat Matt transparent
Neutral 95-703.750 Flat Clear transparent
Lens flat, matt translucent or clear transparent,
15.2 mm x 15.2 mm (medium)
Colour Part No. Lens shape Lens material
Neutral 95-705.720 Flat Matt transparent
Neutral 95-705.750 Flat Clear transparent
Neutral 95-705.740 Concave Matt transparent
Neutral 95-705.770 Concave Clear transparent
Lens remover and mounting tool for use with all three switch
sizes
Image Part No. Product description
1 95-900.009 Mounting tool
2 95-900.005 Lens remover
135
Technical Data Series 95
Pushbutton- and Illuminated pushbutton
Switching system
Gold plated momentary contact, 1 normally open, self-cleaning
Material
Plastic items
PC, as per UL 94 HB, Cd-free
Material of contacts
CuSn, contact gold-plated, soldering terminal tinned
Mechanical characteristics
Actuating travel
4.5 mm
Actuating force
3 N to end position
Switching point
at 2.3 ±0.8 mm operation
Life time
>5 million operations, as per IEC 60512-5-9a
Electrical characteristics
Illumination
recommended SMD-LED types:
P-LCC package or similar, radiation angle approx. 120°; use of smaller
SMD-LED is possible
SMD-LED configurations size:
max. 2 SMD-LEDs for switch size 12.70 mm
max. 3 SMD-LEDs for switch size 15.88 mm and 19.05 mm, single
colour or multi-colour
Height of SMD-LED:
max. 2.1 mm
Switch rating
min. 1 mVDC, 100 µA
max. 48 VDC, 50 mA
Electric strength
≤50 mΩ, as per IEC 60512-2-2b at new state
Isolation resistance
>1 TΩ, as per IEC 60512-2-3a between contacts
Electric strength
2.5 kVAC, as per IEC 60512-2-11
Environmental characteristics
Front protection
IP40 before front plate for complete switch
Operating temperature
−25 °C ... +70 °C
Storage temperature
−40 °C ... +80 °C
Vibration resistance
10 g, at 10 – 2000 Hz, 0.75 mm, as per IEC 60512-4-4
Shock resistance
50 g, 11 ms, as per IEC 60512-4-3
136
Series 95 Technical Drawings
Small Medium
Large
95 Pushbutton 95 Pushbutton
95 Pushbutton
137
Technical Drawings Series 95
Small Medium
95 PCB Layout 95 PCB Layout
Large
95 PCB Layout
