HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile Actual Size Product Description Frequency Range: The 49S Series is a miniature, AT or BT cut strip resonator crystal, housed in low profile 3.5mm high packaging. The Series meets the standard 0.200" board spacing. * 3.2 to 29.999 MHz, AT Fundamental * 26.8 to 50.000 MHz, BT Fundamental * 30.0 to 80.000 MHz, AT 3rd OT Product Features * * * * Low profile 3.5mm high AT or BT cut performance Resistance weld seal Lead (Pb)-free RoHS Compliant Version Available Typical Applications * * * * * * * * Fibre Channel Ethernet Modems ADSL ISDN Microcontrollers Remote Control Devices Network Processors Temperature Range: * Operating: -20 to +70C Standard (see options below) * Storage: -55 to +125C Frequency Stability Tolerance: * 30ppm, -20 to +70C * 50ppm, -40 to +85C, or * 100ppm, -40 to +85C * 0 to -100ppm for BT * Others available Characteristics at 25C 2C: * Frequency Calibration Tolerance: 30ppm, 50ppm (others avail) * Load Capacitance: 12 to 32pF or Series Resonance * Effective Series Resistance: 30 to 200-ohm (frequency dependent) * Drive Level: 100W correlation, 500W Max operating * Shunt Capacitance: 7pF Max. Mechanical: * Shock: MIL-STD-883, Method 2002, Condition B * Solderability: MIL-STD-883, Method 2003 * Solderability (lead free): JESD22-B102-D Method 2 (Preconditioning E) * Terminal Strength: MIL-STD-202, Method 211, Conditions A and C * Vibration: MIL-STD-883, Method 2007, Condition A * Solvent Resistance: MIL-STD-202, Method 215 * Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition B * Resistance to Soldering Heat (lead free): JESD22-B106-C Environmental: * Gross Test Leak: MIL-STD-883, Method 1014, Condition C * Fine Test Leak: MIL-STD-883, Method 1014, Condition A * Thermal Shock: MIL-STD-883, Method 1011, Condition A * Moisture Resistance: MIL-STD-883, Method 1004 Pericom Semiconductor Corporation * 1-800-435-2336 * http://www.pericom.com/saronix 1 All specifications are subject to change without notice. DS-112 Rev E1 | 05/27/2005 HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile Packaging Information: 49S Package Marking Information Frequency, calibration, stability, temp: Line 1: S = SaRonix Designator xxx = Calib/Stability/Temp Code YYWWX = Date Code Line 2: Frequency (up to 7 digits, including decimal point) BT-cut = B or AT-cut Parallel = -(dash) or AT-cut Series = leave Blank xx = Load Capacitance (leave Blank if Series) SxxxYYWWX 24.5760-xx Ordering Information 49S XXX - XX Type Frequency (MHz) Frequency (in MHz) = 0x.xxxx, xx.xxxx (a zero is used in front of frequencies under 10 MHz) B = BT-cut, 26.8 to 50 MHz - (dash) = AT-cut Parallel Resonance Blank = AT-cut Series Resonance XXX X -E (dash E) = Lead (Pb)-free RoHS Compliant Version Blank = Standard version Calibration / Stability / Temp Range GGC = 30ppm / 30ppm / -20 to +70C GHE = 30ppm / 50ppm / -40 to +85C HJE = 50ppm / 100ppm / -40 to +85C * others available Load Capacitance xx = Parallel Resonance (specify load) Blank = Series Resonance Part Number Example: Spec: Freq 5.1234MHz, 30ppm calib, 30ppm stab, -20 to +70C, 16pF = 49S05.1234-16GGC = 49S05.1234-16GGC-E (for lead-free) Pericom Semiconductor Corporation * 1-800-435-2336 * http://www.pericom.com/saronix 2 All specifications are subject to change without notice. DS-112 Rev E1 | 05/27/2005 HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile THIS PAGE NOT RECOMMENDED FOR NEW DESIGNS, SEE PAGES 1-2 Packaging Information: 49S Package Marking Information TH FO IS R PA NE G W EN DE O SI T R GN E C S, OM SE M E E PA N GE DE S D 12 Products with custom frequency, calibration, stability, temp: Line 1: S = SaRonix Designator -(dash) = separator xxx = Calib/Stability/Temp Code YYWW = Date Code Line 2: Frequency (up to 7 digits, including decimal point) BT-cut = B or AT-cut Parallel = -(dash) or AT-cut Series = leave Blank xx = Load Capacitance (leave Blank if Series) S-xxxYYWW 24.5760-xx Products with common frequency and standard specifications: Line 1: S = SaRonix Designator YYWW = Date Code Line 2: Frequency (up to 7 digits, including decimal point) BT-cut = B or AT-cut Parallel = -(dash) or AT-cut Series = leave Blank xx = Load Capacitance (leave Blank if Series) SYYWW 24.5760-xx Ordering Information 49S XXX - Type Frequency (MHz) Common Frequency Code, select code from list on page 2 (applies only to 50ppm Calibration, 50ppm Stability, -20 to +70C). If code not listed on page 2: then Custom Frequency (in MHz) = 0x.xxxx, xx.xxxx (a zero is used in front of frequencies under 10 MHz) B = BT-cut, 26.8 to 50 MHz - (dash) = AT-cut Parallel Resonance Blank = AT-cut Series Resonance XX XXX Calibration / Stability / Temp Range EEA = 20ppm / 20ppm / 0 to +50C GGC = 30ppm / 30ppm / -20 to +70C GHC = 30ppm / 50ppm / -20 to +70C *Blank = 50ppm / 50ppm / -20 to +70C GHE = 30ppm / 50ppm / -40 to +90C HJE = 50ppm / 100ppm / -40 to +90C Load Capacitance xx = Parallel Resonance (specify load) Blank = Series Resonance Part Number Example: Spec: Freq 5.1234MHz, 30ppm calib, 30ppm stab, -20 to +70C, 16pF = 49S05.1234-16GGC *no code used, as these specs designate standard configuration for this series Part Number Examples: Common Freq 20MHz, 50ppm calib, 50ppm stability, -20 to +70C, 12pF = 49S200-12 Common Freq 20MHz, 50ppm calib, 50ppm stability, -20 to +70C, Series = 49S200 Spec: Custom Freq 5.1234MHz, 30ppm calib, 30ppm stab, -20 to +70C, 16pF = 49S05.1234-16GGC Pericom Semiconductor Corporation * 1-800-435-2336 * http://www.pericom.com/saronix 3 All specifications are subject to change without notice. DS-112 Rev E1 | 05/27/2005 HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile THIS PAGE NOT RECOMMENDED FOR NEW DESIGNS, SEE PAGES 1-2 Legacy Part Number Format Freq. MHz 035 037 040 049 051 060 073 080 100 111 120 122 143 150 160 180 184 196 200 240 245 250 268 280 294 300 320 322 330 333 338 352 360 400 403 409 420 425 450 460 480 500 524 564 600 666 Maximum ESR (Fundamental) 200 160 150 150 120 100 80 80 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Maximum ESR (3rd OT) TH FO IS R PA NE G W EN DE O SI T R GN E C S, OM SE M E E PA N GE DE S D 12 3.579545 3.686400 4.000000 4.915200 5.068800 6.000000 7.372800 8.000000 10.000000 11.059200 12.000000 12.288000 14.318180 15.000000 16.000000 18.000000 18.432000 19.660800 20.000000 24.000000 24.576000 25.000000 26.800000 28.000000 29.491200 30.000000 32.000000 32.256000 33.000000 33.333000 33.868000 35.251200 36.000000 40.000000 40.320000 40.960000 42.000000 42.500000 45.000000 46.000000 48.000000 50.000000 52.416000 56.448000 60.000000 66.666667 Freq. Code 30 30 30 30 80 80 80 80 80 80 80 80 80 80 80 80 80 30 80 80 80 80 Pericom Semiconductor Corporation * 1-800-435-2336 * http://www.pericom.com/saronix 4 All specifications are subject to change without notice. DS-112 Rev E1 | 05/27/2005