MGJ6T05150505MC-R13 - MURATA POWER SOLUTIONS

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 1 of 8

www.murata-ps.com

www.murata-ps.com/support

For full details go to

www.murata-ps.com/rohs

FEATURES

No opto feedback

Patents Pending

Optimised bipolar output voltages for IGBT/

SiC & Mosfet gate drives

3 outputs conﬁgurable for all gate drive

applications: +15V/-5V, +15V/-10V & +20V/-

5V outputs

Reinforced insulation to UL60950 pending

UL60601 (3rd Ed) recognition pending

Characterised dv/dt immunity 80kV/µs

Characterised partial discharge performance

5.2kVDC isolation test voltage ‘Hi Pot Test’

Ultra low coupling capacitance 15pF

SMD package

5V, 12V & 24V input voltages

PRODUCT OVERVIEW

Offering conﬁgurable triple output voltages of +15V,

+5V and +5V, the MGJ6 series of DC-DC converters

are ideal for powering ‘high side’ and ‘low side’ gate

drive circuits for IGBTs, Silicon Carbide and Mosfets

in bridge circuits.

A choice of asymmetric output voltages allows

optimum drive levels for best system efﬁciency

and EMI. The MGJ6 series is characterised for high

isolation and dv/dt requirements commonly seen in

bridge circuits used in motor drives and inverters.

A disable/frequency synchronisation pin, simpliﬁes

EMC ﬁlter design. The MGJ6 protection features

include short circuit protection, over temperature

protection and overload protection.

SELECTION GUIDE

Order Code

Output 1 Output 2 Output 3

Rated Output Voltage

Rated Output Current

Output Power

Rated Output Voltage

Rated Output Current

Output Power

Rated Output Voltage

Rated Output Current

Output Power

VmAW VmAW VmAW

MGJ6T05150505MC 15 240 3.6 5 240 1.2 5 240 1.2

MGJ6T12150505MC 15 240 3.6 5 240 1.2 5 240 1.2

MGJ6T24150505MC 15 240 3.6 5 240 1.2 5 240 1.2

SELECTION GUIDE (Continued)

Order Code

Output 1 Output 2 Output 3

Load Regulation (Typ)

Load Regulation (Max)

Ripple & Noise (Typ)2

Ripple & Noise (Max)2

Load Regulation (Typ)

Load Regulation (Max)

Ripple & Noise (Typ)2

Ripple & Noise (Max)2

Load Regulation (Typ)

Load Regulation (Max)

Ripple & Noise (Typ)2

Ripple & Noise (Max)2

% mVp-p % mVp-p % mVp-p

MGJ6T05150505MC 5 10 100 200 5 10 35 75 5 10 35 75

MGJ6T12150505MC 5 10 125 200 5 10 35 75 5 10 35 75

MGJ6T24150505MC 5 10 125 200 5 10 35 75 5 10 35 75

SELECTION GUIDE (Continued)

Order Code

Nominal Input

Voltage

Input Current

at Rated Load

Efﬁciency

(Min)

Efﬁciency

(Typ)

Isolation Capacitance

MTTF1

V mA % pF kHrs

MGJ6T05150505MC 5 1500 78 80 15

MGJ6T12150505MC 12 600 79 82 15

MGJ6T24150505MC 24 300 81 83 15

1. Calculated using MIL-HDBK-217 FN2 calculation model with nominal input voltage at full load.

2. See ripple & noise test method.

All speciﬁcations typical at TA=25°C, nominal input voltage and rated output current unless otherwise speciﬁed.

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 2 of 8

www.murata-ps.com/support

INPUT CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Voltage range

5V input types 4.5 5 9

12V input types 9 12 18

24V input types 18 24 36

Under voltage lock out

Turn on threshold MGJ6T05 4.1

Turn off threshold MGJ6T05 3.0

Turn on threshold MGJ6T12 8.1

Turn off threshold MGJ6T12 7.5

Turn on threshold MGJ6T24 16.7

Turn off threshold MGJ6T24 16.1

Input ripple current

5V input types 110

mA p-p

12V input types 115

24V input types 60

OUTPUT CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Minimal load to meet datasheet speciﬁcation 40 %

Voltage set point accuracy All output types ±4 %

Line regulation Low line to high line 2 %

Transient response

Peak deviation (50-100% & 100-50% swing) 4.3 %Vout

Settling time 0.1 ms

ISOLATION CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Isolation test voltage Flash tested for 1 second 5200 VDC

Resistance Viso = 1kVDC 100 GΩ

GENERAL CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Switching frequency 100 kHz

TEMPERATURE CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Operation -40 105

°C

Storage -50 125

Over temperature protection 180

Product temperature above ambient 100% Load, Nom VIN, Still Air 25

ABSOLUTE MAXIMUM RATINGS

Short-circuit protection (for SELV input voltages) Continuous

Input voltage, MGJ6 5V input types 12V

Input voltage, MGJ6 12V input types 20V

Input voltage, MGJ6 24V input types 40V

RoHS COMPLIANCE, MSL AND PSL INFORMATION

This series is compatible with RoHS soldering systems with a peak reﬂow solder temperature of 245ºC as per

J-STD-020D.1. The pin termination ﬁnish on this product series is Gold with Nickel Pre-plate. The series is backward

compatible with Sn/Pb soldering systems. The series has a Moisture Sensitivity Level (MSL) 1.

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 3 of 8

www.murata-ps.com/support

APPLICATION NOTES

Start-up times

Part No. Start-up times

MGJ6T05150505MC 15

MGJ6T12150505MC 15

MGJ6T24150505MC 15

Output Voltage Maximum output

capacitance

VµF

15 220

5 470

Disable/Frequency synchronisation

Min Typ Max Units

Disable/Synch

Pull Down Current 0.5 mA

Input High 2 5 V

Input Low 0 0.8 V

Synchronisation Frequency Range 90 100 110 kHz

Duty Cycle 25 75 %

Output conﬁgurations for power switches

Terminal IGBT SIC MOSFET

(P6)

15V Output

+15V

0.24A

+20V

0.24A

+15V

0.3A

(P5)

15V Return

5VA Output

0V No connection 0V

(P4)

5VA Return

5VB Output

No connection 0V -5V

0.3A

(P3)

5VB Return

-10V

0.24A

-5V

0.24A No connection

Typical start up times for this series, with no additional output capacitance are:

Output capacitance must not exceed:

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 4 of 8

www.murata-ps.com/support

TECHNICAL NOTES

ISOLATION VOLTAGE

‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test

voltage, applied for a speciﬁed time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.

Murata Power Solutions MGJ6 series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 5.2kVDC for 1 second.

A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”

The MGJ6 series is pending recognition by Underwiters Laboratory for various voltages, please see safety approval section below.

REPEATED HIGH-VOLTAGE ISOLATION TESTING

It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on

materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be

reduced by 20% from speciﬁed test voltage.

SAFETY APPROVAL

UL 60601

The MGJ6 series is pending recognition by Underwriters Laboratory (UL) to the 3rd edition of 60601 and provides 1 MOOP (means of operator protection) based upon a working

voltage of 250 Vrms max., between Primary and Secondary.

UL 60950

The MGJ6 series is pending recognition by Underwriters Laboratory (UL) to UL 60950 for reinforced insulation to a working voltage of 250Vrms.

CHARACTERISATION TEST METHODS

Ripple & Noise Characterisation Method

Ripple and noise measurements are performed with the following test conﬁguration.

C1 1µF X7R m ultilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter

C2 10µF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less

than 100m at 100 kHz

C3 100nF multilayer ceramic capacitor, general purpose

R1 450 resistor, carbon ﬁlm, ±1% tolerance

R2 50 BNC termination

T1 3T of the coax cable through a ferrite toroid

RLOAD Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires

Measured values are multiplied by 10 to obtain the speciﬁed values.

Differential Mode Noise Test Schematic

OSCILLOSCOPE

Y INPUT

SUPPLY

C1 C2 C3 R1 T1 R2

Input Output

DC/DC Converter

R LOAD

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 5 of 8

www.murata-ps.com/support

EFFICIENCY VS LOAD

MGJ6T05150505MC MGJ6T12150505MC

MGJ6T24150505MC

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 6 of 8

www.murata-ps.com/support

EMC FILTERING AND SPECTRA

FILTERING

MGJ6T05150505MC MGJ6T12150505MC

MGJ6T24150505MC

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 7 of 8

www.murata-ps.com/support

PACKAGE SPECIFICATIONS

MECHANICAL DIMENSIONS PIN CONNECTIONS

Pin Function

1 -Vin

2 Dis/Sync

5VB RTN

5VA RTN

5VB Out

15V RTN

5VA Out

6 15 Vout

7 +Vin

RECOMMENDED FOOTPRINT DETAILS

All dimensions in mm (inches), Controlling dimensions is mm.

Tolerance (unless otherwise stated) ±0.25 (0.010).

Weight: 12 g

x7 PLACES

3.30 [0.130]

x7 PLACES

2.54 [0.100]

5.08 [0.200]

27.94 [1.100]

6.35 [0.250]

12.70 [0.500]

19.05 [0.750]

RECOMMENDED

ISOLATION BARRIER

5.08 [0.200]10.16 [0.400]

31.24 [1.230]

22.61 [0.890]

1.65 [0.065]

1.78 [0.070]

SMA PICKUP POINT

SEATING PLANE

19.05 [0.750]

6.35 [0.250]

12.70 [0.500]

5.08 [0.200]

27.94 [1.100]

SMA PICKUP POINT

(TOP OF FERRITE CORE)

14.45

13.45

[

0.569

0.530

]

14.65

13.65

[

0.577

0.537

]

MGJ6 Series

5.2kVDC Isolated 6W SM DC/DC Converters

KDC_MGJ6C.A01 Page 8 of 8

www.murata-ps.com/support

Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other

technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply

the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speciﬁcations are subject to change without

Murata Power Solutions, Inc.

11 Cabot Boulevard, Mansﬁeld, MA 02048-1151 U.S.A.

ISO 9001 and 14001 REGISTERED

This product is subject to the following operating requirements

and the Life and Safety Critical Application Sales Policy:

Refer to: http://www.murata-ps.com/requirements/

TAPE & REEL SPECIFICATIONS

REEL OUTLINE DIMENSIONS TAPE OUTLINE DIMENSIONS

REEL PACKAGING DETAILS

Product Orientation

Pin 1, located nearest to

carrier drive sprocket.

Reel Quantity: 500