Flush Silhouette Switches LW Series Switches & Pilot Lights Flush Silhouette Switches (Selection Guide) Flush Silhouette Switches LW Series Function Category Metal Bezel Round Round Flush Extended Illuminated Pushbuttons Black Plastic Bezel Round Round Flush Round Flush Square Flush Extended with Guard Momentary/Maintained Square Flush with Guard Shape Part No. Page LW6ML-1 6 LW6ML-2 6 LW6L-1 7 LW6L-2 7 Function Category LW6GL-1 7 LW7L-1 8 LW7GL-1 8 Pilot Lights Metal Bezel Round Flush Round Extended Black Plastic Bezel Round Flush Round Extended Square Flush Momentary/Maintained Square Extended Shape Part No. Page LW6MP-1 11 LW6MP-2 11 LW6P-1 11 Function Category LW6P-2 11 LW7P-1 11 LW7P-2 11 Pushbuttons Metal Bezel Round Round Flush Extended Round Flush Black Plastic Bezel Round Round Flush Square Flush Extended with Guard Momentary/Maintained Square Flush with Guard Shape Part No. Page LW6MB-1 13 LW6MB-*2 13 LW6B-*1 14 Function LW6B-*2 14 LW6GB-*1 14 LW7B-*1 15 LW7GB-*1 15 Selector Switches Metal Bezel Black Plastic Bezel Round Category Square Knob Lever Knob Lever Knob Lever LW6MS 18 LW6MS-*L 18 LW6S 19 LW6S-*L 19 LW7S 20 LW7S-*L 20 Shape Part No. Page 2 Flush Silhouette Switches (Selection Guide) Flush Silhouette Switches LW Series Function Metal Bezel Category Illuminated Selector Switches Black Plastic Bezel Round Square Knob Key Selector Switches Metal Bezel Black Plastic Metal Round -- Shape Part No. Page Function Category LW6MF 22 LW6F 22 LW7F 23 LW6MK 25 LW6K 27 Ring-illuminated Key Selector Switches Metal Bezel Black Bezel Round Round Shape Part No. Page LW6MJ 30 LW6J 33 3 Flush Silhouette Switches LW Series Flush bezel projects only 2 mm from front of panel o28 round and 28-mm square black plastic bezels. Round metal bezels are also available. * o25.3-mm round panel cut-out, 24.5-mm square panel cut-out. * Collective mounting is possible. * Pushbuttons, pilot lights, illuminated pushbuttons, selector switches, key selector switches, and illuminated selector switches are available. Square pushbuttons also available with switchguards. * Key selector switches with high-security lock mechanism. Over 60 different key variations available to choose from. * Removable contact block with a locking lever enable easy installation even when mounted collectively. * Gold (gold-clad silver) or silver contacts. * Degree of protection: IP65 (IEC 60529) * UL recognized and CSA certified. EN compliant. Applicable Standards Mark File No. or Organization UL508 UL recognized File No. E55996 CSA C22.2 No.14 CSA File No. LR 21451 TUV Rheinland EN60947-5-1 EU Low Voltage Directive LW7\LW7G: 2013010305613905 LW6/LW6M/LW6G: 2013010305613904 GB14048.5 Specifications Operating Temperature Contact Ratings Storage Temperature Operating Humidity Contact Resistance Gold Contacts (switch base: blue) Insulation Resistance Maximum Voltage 250V AC/DC Thermal Current 3A Operating Voltage 125V AC 30V DC Operating Current 0.1A 0.1A (resistive load) Contact Material Gold-clad silver Minimum applicable load (reference value): 5V AC/DC, 1 mA (Applicable range is subject to the operating conditions and load.) Silver Contacts (switch base: gray) Operating Voltage AC Operating 50/60Hz Current DC Resistive Load Inductive Load Resistive Load Inductive Load Thermal Current Contact Material AC inductive load: PF = 0.6 to 0.7 DC inductive load: L/R = 7 ms max. 30V - - 2A 1A 5A Silver 125V 3A 2A 0.4A 0.2A 250V 2A 1.5A - - Mechanical Life (minimum operations) Weight (approx.) 30g (LW6S-3LC3) 36g (LW6MF-2C34) 33g (LW6F-2C34) 58g (LW6MK-3C3A) 55g (LW6K-3C3A) 60g (LW6MJ-2C34) 58g (LW6J-2C34) 50 mW maximum (initial value) 100 MW minimum (500V DC megger) Overvoltage Category II (Note 3) (illumination unit) Impulse Withstand Voltage 0.5kV (illumination unit) Pollution Degree 2 (Note 3) Between live part and ground: 2,500V AC, 1 minute Between terminals of different poles: Switch Unit 2,500V AC, 1 minute Dielectric Between terminals of the same poles: Strength 1,000V AC, 1 minute Illumination Between live part and ground: Unit (Note 4) 2,500V AC, 1 minute Damage limits: 30 Hz, 1.5 mm Vibration Resistance Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Damage limits:1,000 m/s2 (100G) Shock Resistance Operating extremes: 100 m/s2 (10G) Weight (Examples) 25g (LW6MB-M1C3) 22g (LW6B-M1C3) 20g (LW6MP-14) 18g (LW6P-14) 29g (LW6ML-M1C34) 26g (LW6L-M1C34) 33g (LW6MS-3LC3) -25 to +60C (no freezing) Illuminated units: -25 to +50C -40 to +80C 45 to 85% RH (no condensation) Electrical Life (minimum operations) Momentary: 1,000,000 Maintained: 500,000 Selector switches: 250,000 Illuminated selector switches: 250,000 Key selector switches: 100,000 Ring-illuminated key selector switches: 100,000 (Note 2) Momentary: 100,000 (Note 1) Maintained: 100,000 (Note 2) Selector switches: 100,000 (Note 2) Illuminated selector switches: 100,000 (Note 2) Key selector switches: 100,000 (Note 2) Ring-illuminated key selector switches: 100,000 (Note 2) Degree of Protection Terminal Style Bezel Material IP65 (IEC 60529) Solder/tab terminal #110 PC board terminal Screw terminal Metal bezel: diecast aluminum Black plastic bezel: polyamide Note 1: Switching frequency 1,800 operations/h Note 2: Switching frequency 900 operations/h Note 3: Ring-illuminated key selector switches only Note 4: Except ring-illuminated key selector switches 4 Flush Silhouette Switches LW Series LED Lamp Ratings (LSTD) Part No. Lamp Base Rated Voltage LSTD-1 LSTD-2 LSTD-6 BA9S/13 6V AC/DC 12V AC/DC 24V AC/DC 6V AC/DC 10% 12V AC/DC 10% 24V AC/DC 10% 8 mA 11 mA 11 mA A, R, W: 7 mA 10 mA 10 mA G, PW, S: 5.5 mA A (amber), G (green), PW (pure white), R (red), S (blue), W (white) Use PW lamp for yellow (Y) illumination. Same as illumination color (pure white lamp base color is gray) Die stamped on the base Approx. 50,000 hours (The luminance is reduced to 50% the initial intensity when used on complete DC at 25C.) Voltage Range AC Current Draw DC Color Code Lamp Base Color Voltage Marking Life (reference value) X1 LED Chip Protection Diode Internal Circuit Zener Diode Resistor X2 * Use a pure white (PW) LED lamp for yellow (Y) lens. Illumination Ratings (Ring-illuminated Key Selector Switches) Current Rated Voltage Operating Voltage 24V DC 24V DC 10% Full Illumination 18 mA Two-way Split Illumination 9 mA * The illumination part is UL-recognized and CSA-certified subject to use within in Class 2 circuit. * The LED lamp cannot be replaced. Mounting Hole Layout Round Square +0.2 +0.2 -0.1 24.5 -0.1 28 min. 28 min. o25.3 28 min. 28 min. Note: Determine mounting centers to ensure easy operation. * Pushbutton with switch guard: Vertical 56.5 mm, Horizontal 28 mm minimum * Lever operator type selector switches: Vertical 31 mm, Horizontal 28 mm minimum * Ring-illuminated key selector switches: Vertical 28 mm, Horizontal 33 mm minimum * Screw terminal: Vertical 40 mm, Horizontal 28 mm minimum Ordering Information Standard Units * Specify a button or lens color code in the Part No. * All illuminated units are supplied with an LED lamp. * All standard units are UL recognized, CSA certified, and EN compliant (TUV Rheinland). * Collective mounting and PC board mount. 5 Flush Silhouette Switches LW Series Illuminated Pushbuttons Round Illuminated Pushbuttons with Metal Bezel Package Quantity: 1 Shape Lamp Round Flush with Metal Bezel LW6ML-M1 LW6ML-A1 Operation Contact Material Gold Momentary Silver LED Gold Maintained Silver Round Extended with Metal Bezel LW6ML-M2 LW6ML-A2 Gold Momentary Silver LED Gold Maintained Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Solder/Tab Terminal LW6ML-M1C1 LW6ML-M1C2 LW6ML-M1C3 LW6ML-M1C5 LW6ML-M1C6 LW6ML-M1C7 LW6ML-A1C1 LW6ML-A1C2 LW6ML-A1C3 LW6ML-A1C5 LW6ML-A1C6 LW6ML-A1C7 LW6ML-M2C1 LW6ML-M2C2 LW6ML-M2C3 LW6ML-M2C5 LW6ML-M2C6 LW6ML-M2C7 LW6ML-A2C1 LW6ML-A2C2 LW6ML-A2C3 LW6ML-A2C5 LW6ML-A2C6 LW6ML-A2C7 Part No. PC Board Terminal LW6ML-M1C1V LW6ML-M1C2V LW6ML-M1C3V - - - LW6ML-A1C1V LW6ML-A1C2V LW6ML-A1C3V - - - LW6ML-M2C1V LW6ML-M2C2V LW6ML-M2C3V - - - LW6ML-A2C1V LW6ML-A2C2V LW6ML-A2C3V - - - Screw Terminal - LW6ML-M1C2M - - LW6ML-M1C6M - - LW6ML-A1C2M - - LW6ML-A1C6M - - LW6ML-M2C2M - - LW6ML-M2C6M - - LW6ML-A2C2M - - LW6ML-A2C6M - Color Code and Voltage Code Lens/LED Color Code Specify a Lens/LED color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue W: white Y: yellow Operating Voltage Code Specify an operating voltage code in place of in the Part No. 2: 6V AC/DC 3: 12V AC/DC 4: 24V AC/DC * Every illuminated pushbutton contains an LED lamp (LSTD) of the specified color and voltage. A pure white LED lamp is used for yellow illumination. * For replacement LED lamps, see page 38. * When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. (without CCC marking) Example: LW6ML-M1C24W 6 Flush Silhouette Switches LW Series Illuminated Pushbuttons Round Illuminated Pushbuttons with Black Plastic Bezel Package Quantity: 1 Shape Lamp Round Flush with Black Plastic Bezel LW6L-M1 LW6L-A1 Operation Contact Material Gold Momentary Silver LED Gold Maintained Silver Round Extended with Black Plastic Bezel LW6L-M2 LW6L-A2 Gold Momentary Silver LED Gold Maintained Silver Round Flush Guard Type with Black Plastic Bezel LW6GL-M1 LW6GL-A1 Gold Momentary Silver LED Gold Maintained Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Solder/Tab Terminal LW6L-M1C1 LW6L-M1C2 LW6L-M1C3 LW6L-M1C5 LW6L-M1C6 LW6L-M1C7 LW6L-A1C1 LW6L-A1C2 LW6L-A1C3 LW6L-A1C5 LW6L-A1C6 LW6L-A1C7 LW6L-M2C1 LW6L-M2C2 LW6L-M2C3 LW6L-M2C5 LW6L-M2C6 LW6L-M2C7 LW6L-A2C1 LW6L-A2C2 LW6L-A2C3 LW6L-A2C5 LW6L-A2C6 LW6L-A2C7 LW6GL-M1C1 LW6GL-M1C2 LW6GL-M1C3 LW6GL-M1C5 LW6GL-M1C6 LW6GL-M1C7 LW6GL-A1C1 LW6GL-A1C2 LW6GL-A1C3 LW6GL-A1C5 LW6GL-A1C6 LW6GL-A1C7 Part No. PC Board Terminal LW6L-M1C1V LW6L-M1C2V LW6L-M1C3V - - - LW6L-A1C1V LW6L-A1C2V LW6L-A1C3V - - Screw Terminal - LW6L-M1C2M - - LW6L-M1C6M - - LW6L-A1C2M - - LW6L-A1C6M - LW6L-M2C1V LW6L-M2C2V LW6L-M2C3V - - - LW6L-A2C1V LW6L-A2C2V LW6L-A2C3V - - - LW6GL-M1C1V LW6GL-M1C2V LW6GL-M1C3V - - - LW6GL-A1C1V LW6GL-A1C2V LW6GL-A1C3V - - - - - LW6L-M2C2M - - LW6L-M2C6M - - LW6L-A2C2M - - LW6L-A2C6M - - LW6GL-M1C2M - - LW6GL-M1C6M - - LW6GL-A1C2M - - LW6GL-A1C6M - Color Code and Voltage Code Lens/LED Color Code Specify a Lens/LED color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue W: white Y: yellow Operating Voltage Code Specify an operating voltage code in place of in the Part No. 2: 6V AC/DC 3: 12V AC/DC 4: 24V AC/DC * Every illuminated pushbutton contains an LED lamp (LSTD) of the specified color and voltage. A pure white LED lamp is used for yellow illumination. * For replacement LED lamps, see page 38. * When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. (without CCC marking) Example: LW6ML-M1C24W 7 Flush Silhouette Switches LW Series Illuminated Pushbuttons Square Illuminated Pushbuttons with Black Plastic Bezel Package Quantity: 1 Shape Lamp Square Flush with Black Plastic Bezel LW7L-M1 LW7L-A1 Operation Contact Material Gold Momentary Silver LED Gold Maintained Silver Square Flush Guard with Black Plastic Bezel LW7GL-M1 LW7GL-A1 Gold Momentary Silver LED Gold Maintained Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Solder/Tab Terminal LW7L-M1C1 LW7L-M1C2 LW7L-M1C3 LW7L-M1C5 LW7L-M1C6 LW7L-M1C7 LW7L-A1C1 LW7L-A1C2 LW7L-A1C3 LW7L-A1C5 LW7L-A1C6 LW7L-A1C7 LW7GL-M1C1 LW7GL-M1C2 LW7GL-M1C3 LW7GL-M1C5 LW7GL-M1C6 LW7GL-M1C7 LW7GL-A1C1 LW7GL-A1C2 LW7GL-A1C3 LW7GL-A1C5 LW7GL-A1C6 LW7GL-A1C7 Part No. PC Board Terminal LW7L-M1C1V LW7L-M1C2V LW7L-M1C3V - - - LW7L-A1C1V LW7L-A1C2V LW7L-A1C3V - - - LW7GL-M1C1V LW7GL-M1C2V LW7GL-M1C3V - - - LW7GL-A1C1V LW7GL-A1C2V LW7GL-A1C3V - - - Screw Terminal - LW7L-M1C2M - - LW7L-M1C6M - - LW7L-A1C2M - - LW7L-A1C6M - - LW7GL-M1C2M - - LW7GL-M1C6M - - LW7GL-A1C2M - - LW7GL-A1C6M - Color Code and Voltage Code Lens/LED Color Code Specify a Lens/LED color code in place of in the Part No. A: amber G: green PW: pure white S: blue W: white Y: yellow Operating Voltage Code Specify an operating voltage code in place of in the Part No. 2: 6V AC/DC 3: 12V AC/DC 4: 24V AC/DC * Every illuminated pushbutton contains an LED lamp (LSTD) of the specified color and voltage. A pure white LED lamp is used for yellow illumination. * For replacement LED lamps, see page 38. * When using white lens unit (clear lens + white marking plate) with color codes A, G, R, or S, specify "W" before in the Part No. (without CCC marking) Example: LW6L-M1C24W 8 Flush Silhouette Switches LW Series Illuminated Pushbuttons Dimensions Round/Square Terminal Cover LW-VL2 1.2 6.8 6.2 Gasket 54 Tab Terminal 2.8W x 0.5t Round Square 1.2 1.2 PC Board Terminal 0.8W x 0.5t Flush 5 6 6 5 2-R0.6 Solder/Tab Terminal 6.8 4.85 4.85 6.8 8.2 2.0 2.6 LOCK TOP 61.9 1.0 Mounting Bracket Locking Ring 6.8 6.5 Terminal Cover LW-VL2M Panel Thickness 0.8 to 3.2 6.5 M3 Terminal Screw Screw Terminal 5.4 PC Board Terminal 8.5 9 18.7 43 28 8 43 o2 60.5 2 Solder/Tab Terminal Extended 2.0 5.6 Round with Switch Guard Terminal Cover LW-VL2 M3 Terminal Screw 6.8 6.2 6.8 6.5 6.5 Terminal Cover LW-VL2M Panel Thickness 0.8 to 3.2 Mounting Bracket Locking Ring 6.8 4.85 4.85 6.8 8.2 2.0 TOP 61.9 Gasket 54 5.4 31.4 5 14 6 6 15 1.2 40.8 Tab Terminal 2.8W x 0.5t 1.2 5 PC Board Terminal 0.8W x 0.5t 2 60.5 5.5 Screw Terminal 43 PC Board Terminal Terminal Cover LW-VL2 M3 Terminal Screw 6.8 6.5 6.5 6.8 6.2 28 6.8 4.85 4.85 6.8 LOCK 8.2 2.0 2 4.9 Panel Thickness 0.8 to 3.2 Mounting Bracket Locking Ring TOP 61.9 18.7 Solder/Tab Terminal Square with Switch Guard Terminal Cover LW-VL2M 8.5 43 9 54 Gasket 5.4 31 15 1.2 40.3 Tab Terminal 2.8W x 0.5t 5 14 6 6 1.2 5 PC Board Terminal 0.8W x 0.5t 2 60.5 Screw Terminal 5.5 43 PC Board Terminal * 9 8.5 43 18.7 2 4.9 28 Solder/Tab Terminal 9 Flush Silhouette Switches LW Series Illuminated Pushbuttons R18 16.2 18.2 NC NO C C X1 NC X2 NO X2 16.2 23.2 K C 25 25.4 Screw Terminal LO K C K C LO LO R18 R18 Bottom View 25 26.5 PC Board Terminal Solder/Tab Terminal Terminal Arrangement (Bottom View) NO C NC NC NO C NO C X1 NO C X2 NO C Lamp Terminal X2 Lamp Terminal NC TOP 1 NC 2 X2 Lamp Terminal (interconnected) X1 Lamp Terminal 3 Screw Terminal NC Solder/Tab Terminal TOP Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Lamp terminals do not have any polarity. PC Board Drilling Layout (Bottom View) 6.80.05 Switch Switch Terminal Terminal 2C 1C Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. 10 2.8 2.4 (0.8) (0.8) Lamp Switch Terminal Terminal 3C NC Terminal NO Terminal COM Terminal 2.8 Lamp Terminal X1 Lamp Terminal X2 Lamp Terminal X2 2.8 0 5 (0.5) .2 +0.1 5 (0.5) -o1 2.4 12 1.6 (PC Board) 6.80.05 (0.5) 4.85 (0.8) 6.50.05 (0.5) Soldered Side Mounting Side All dimensions in mm. Flush Silhouette Switches LW Series Pilot Lights Round / Square Pilot Lights with Metal Bezel and Black Plastic Bezel Package Quantity: 1 Shape Lamp Round Flush with Metal Bezel LW6MP-1 LED Round Extended with Metal Bezel LW6MP-2 LED Round Flush with Black Plastic Bezel LW6P-1 LED Round Extended with Black Plastic Bezel LW6P-2 LED Square Flush with Black Plastic Bezel LW7P-1 LED Square Extended with Black Plastic Bezel LW7P-2 LED Input Type Solder/Tab Terminal (Unibody) Part No. PC Board Terminal (w/Removable Contact Block) Screw Terminal (Unibody) 6V AC/DC 10% LW6MP-12 LW6MP-1C02V LW6MP-12M 12V AC/DC 10% LW6MP-13 LW6MP-1C03V LW6MP-13M 24V AC/DC 10% LW6MP-14 LW6MP-1C04V LW6MP-14M 6V AC/DC 10% LW6MP-22 LW6MP-2C02V LW6MP-22M 12V AC/DC 10% LW6MP-23 LW6MP-2C03V LW6MP-23M 24V AC/DC 10% LW6MP-24 LW6MP-2C04V LW6MP-24M 6V AC/DC 10% LW6P-12 LW6P-1C02V LW6P-12M 12V AC/DC 10% LW6P-13 LW6P-1C03V LW6P-13M 24V AC/DC 10% LW6P-14 LW6P-1C04V LW6P-14M 6V AC/DC 10% LW6P-22 LW6P-2C02V LW6P-22M 12V AC/DC 10% LW6P-23 LW6P-2C03V LW6P-23M 24V AC/DC 10% LW6P-24 LW6P-2C04V LW6P-24M 6V AC/DC 10% LW7P-12 LW7P-1C02V LW7P-12M 12V AC/DC 10% LW7P-13 LW7P-1C03V LW7P-13M 24V AC/DC 10% LW7P-14 LW7P-1C04V LW7P-14M 6V AC/DC 10% LW7P-22 LW7P-2C02V LW7P-22M 12V AC/DC 10% LW7P-23 LW7P-2C03V LW7P-23M 24V AC/DC 10% LW7P-24 LW7P-2C04V LW7P-24M Illumination Color Code Specify a illumination color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue W: white Y: yellow * Every pilot light contains an LED lamp (LSTD) of the specified color and voltage. A pure white LED lamp is used for yellow illumination. * For replacement LED lamps, see page 38. 11 Flush Silhouette Switches LW Series Pilot Lights Dimensions Unibody w/Removable Contact Block Gasket Mounting Bracket Mounting Bracket Panel Thickness 0.8 to 3.2 Locking Ring M3 Terminal Screw Locking Ring Panel Thickness 0.8 to 3.2 Terminal Cover Terminal Cover LW-PVLM 2.6 1.0 1.2 11.35 LOCK TOP 5.95 LW-PVL 43 41.8 Tab Terminal 2.8W x 0.5t PC Board Terminal 0.8W x 0.5t 1.2 6.0 6.75 7.2 2-R0.6 *Solder/Tab Terminal Gasket Flush 2 26 33.3 7.5 34 Solder/Tab Terminal Screw Terminal 8.5 43 5.5 2 18.7 2 4 2 PC Board Terminal o2 7.7 8. 0 4.5 5 5 Flush Round (Extended) 1.5 3.5 Square (Extended) Round 28 Square Terminal Arrangement (Bottom View) Unibody w/Removable Contact Block Screw Terminal Solder/Tab Terminal Lamp Terminal TOP Lamp Terminal Lamp Terminal X2 PC Board Terminal TOP TOP Lamp Terminal X1 Lamp Terminal (interconnected) X1 X2 X1 X2 X2 Lamp Terminal (interconnected) Lamp terminals do not have any polarity. X2 Lamp terminals do not have any polarity. PC Board Drilling Layout (Bottom View) Lamp Terminal (0.8) (0.8) Lamp Terminal X2 2.8 2.4 5 Lamp Terminal X2 2.8 5 Lamp Terminal X1 2.8 (0.8) 0 2.4 1.6 (PC Board) (0.5) 3-o 1.2 +0.1 Soldered Side Mounting Side Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. All dimensions in mm. 12 Flush Silhouette Switches LW Series Pushbuttons Round Pushbuttons with Metal Bezel Package Quantity: 1 Shape Operation Round Flush with Metal Bezel LW6MB-M1 LW6MB-A1 Contact Material Contact SPDT Solder/Tab Terminal LW6MB-M1C1 Gold DPDT LW6MB-M1C2 3PDT SPDT LW6MB-M1C3 LW6MB-M1C5 DPDT LW6MB-M1C6 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT LW6MB-M1C7 LW6MB-A1C1 LW6MB-A1C2 LW6MB-A1C3 LW6MB-A1C5 LW6MB-A1C6 LW6MB-A1C7 LW6MB-M2C1 DPDT LW6MB-M2C2 3PDT SPDT LW6MB-M2C3 LW6MB-M2C5 DPDT LW6MB-M2C6 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT LW6MB-M2C7 LW6MB-A2C1 LW6MB-A2C2 LW6MB-A2C3 LW6MB-A2C5 LW6MB-A2C6 Momentary Silver Gold Maintained Silver Round Extended with Metal Bezel LW6MB-M2 LW6MB-A2 Gold Momentary Silver Gold Maintained Silver LW6MB-A2C7 Part No. PC Board Terminal LW6MB-M1C1V Screw Terminal - LW6MBLW6MB-M1C2V M1C2M - LW6MB-M1C3V - - LW6MB- M1C6M - - - LW6MB-A1C1V LW6MB-A1C2V LW6MB-A1C2M - LW6MB-A1C3V - - - LW6MB-A1C6M - - - LW6MB-M2C1V LW6MBLW6MB-M2C2V M2C2M - LW6MB-M2C3V - - LW6MB- M2C6M - - LW6MB-A2C1V - LW6MB-A2C2V LW6MB-A2C2M LW6MB-A2C3V - - - - LW6MB-A2C6M - - Button Color Code Specify a button color code in place of in the Part No. LA: amber LB: black LG: green LR: red LS: blue LW: white LY: yellow Specify a button color code in place of in the Part No. LA: amber LB: black LG: green LR: red LS: blue LW: white LY: yellow * Lens style buttons are used for illuminated pushbuttons. * For details on marking plate and film, see page 39. 13 Flush Silhouette Switches LW Series Pushbuttons Round Pushbuttons with Black Plastic Bezel Package Quantity: 1 Shape Round Flush with Black Plastic Bezel LW6B-M1 LW6B-A1 Operation Contact Material Gold Momentary Silver Gold Maintained Silver Round Extended with Black Plastic Bezel LW6B-M2 LW6B-A2 Gold Momentary Silver Gold Maintained Silver Round Flush Guard Type with Black Plastic Bezel LW6GB-M1 LW6GB-A1 Gold Momentary Silver Gold Maintained Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT Solder/Tab Terminal LW6B-M1C1 LW6B-M1C2 LW6B-M1C3 LW6B-M1C5 LW6B-M1C6 LW6B-M1C7 LW6B-A1C1 LW6B-A1C2 LW6B-A1C3 LW6B-A1C5 LW6B-A1C6 LW6B-A1C7 LW6B-M2C1 LW6B-M2C2 LW6B-M2C3 LW6B-M2C5 LW6B-M2C6 LW6B-M2C7 LW6B-A2C1 LW6B-A2C2 LW6B-A2C3 LW6B-A2C5 LW6B-A2C6 LW6B-A2C7 LW6GB-M1C1 DPDT LW6GB-M1C2 3PDT SPDT LW6GB-M1C3 LW6GB-M1C5 DPDT LW6GB-M1C6 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT LW6GB-M1C7 LW6GB-A1C1 LW6GB-A1C2 LW6GB-A1C3 LW6GB-A1C5 LW6GB-A1C6 LW6GB-A1C7 * Lens style buttons are used for illuminated pushbuttons. * For details on marking plate and film, see page 39. 14 Part No. PC Board Terminal LW6B-M1C1V LW6B-M1C2V LW6B-M1C3V - - - LW6B-A1C1V LW6B-A1C2V LW6B-A1C3V - - - LW6B-M2C1V LW6B-M2C2V LW6B-M2C3V - - - LW6B-A2C1V LW6B-A2C2V LW6B-A2C3V - - - LW6GB-M1C1V Screw Terminal - LW6B-M1C2M - - LW6B-M1C6M - - LW6B-A1C2M - - LW6B-A1C6M - - LW6B-M2C2M - - LW6B-M2C6M - - LW6B-A2C2M - - LW6B-A2C6M - - LW6GBLW6GB-M1C2V M1C2M LW6GB-M1C3V - - - LW6GB- M1C6M - - LW6GB-A1C1V - LW6GB-A1C2V LW6GB-A1C2M LW6GB-A1C3V - - - - LW6GB-A1C6M - - Button Color Code Specify a button color code in place of in the Part No. LA: amber LB: black LG: green LR: red LS: blue LW: white LY: yellow Flush Silhouette Switches LW Series Pushbuttons Square Pushbuttons with Black Plastic Bezel Package Quantity: 1 Shape Square Flush with Black Plastic Bezel LW7B-M1 LW7B-A1 Operation Contact Material Gold Momentary Silver Gold Maintained Silver Square Flush Guard Type with Black Plastic Bezel LW7GB-M1 LW7GB-A1 Gold Momentary Silver Gold Maintained Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT Solder/Tab Terminal LW7B-M1C1 LW7B-M1C2 LW7B-M1C3 LW7B-M1C5 LW7B-M1C6 LW7B-M1C7 LW7B-A1C1 LW7B-A1C2 LW7B-A1C3 LW7B-A1C5 LW7B-A1C6 LW7B-A1C7 LW7GB-M1C1 DPDT LW7GB-M1C2 3PDT SPDT LW7GB-M1C3 LW7GB-M1C5 DPDT LW7GB-M1C6 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT LW7GB-M1C7 LW7GB-A1C1 LW7GB-A1C2 LW7GB-A1C3 LW7GB-A1C5 LW7GB-A1C6 LW7GB-A1C7 Part No. PC Board Terminal LW7B-M1C1V LW7B-M1C2V LW7B-M1C3V - - - LW7B-A1C1V LW7B-A1C2V LW7B-A1C3V - - - LW7GB-M1C1V Screw Terminal - LW7B-M1C2M - - LW7B-M1C6M - - LW7B-A1C2M - - LW7B-A1C6M - - LW7GBLW7GB-M1C2V M1C2M LW7GB-M1C3V - - - LW7GB- M1C6M - - LW7GB-A1C1V - LW7GB-A1C2V LW7GB-A1C2M LW7GB-A1C3V - - - - LW7GB-A1C6M - - Button Color Code Specify a button color code in place of in the Part No. LA: amber LB: black LG: green LR: red LS: blue LW: white LY: yellow * Lenses for illuminated pushbuttons are used for flush silhouette pushbuttons. * For details on marking plate and film, see page 39. 15 Flush Silhouette Switches LW Series Pushbuttons Dimensions Panel Thickness 0.8 to 3.2 Terminal Cover LW-VL2 Mounting Bracket Locking Ring 6.8 6.8 8.2 LOCK TOP 2.0 1.0 2.6 1.2 6.2 6.8 Terminal Cover LW-VL2M 4.85 Round/Square 6.8 4.85 M3 Terminal Screw Solder/Tab Terminal Gasket 61.9 2-R0.6 54 Round Tab Terminal 2.8W x 0.5t Square 1.2 1.2 Flush 5 6 6 5 PC Board Terminal 0.8W x 0.5t Screw Terminal 43 8.5 9 PC Board Terminal 18.7 o2 8 5.4 60.5 43 28 2 Solder/Tab Terminal Extended Round Flush Guard 2.0 5.6 Panel Thickness 0.8 to 3.2 M3 Terminal Screw Terminal Cover Terminal Cover Mounting Bracket Locking Ring 6.8 6.8 8.2 2.0 LOCK TOP 61.9 54 5.4 31.4 Tab Terminal 2.8W x 0.5t 15 5 14 6 6 1.2 1.2 PC Board Terminal 0.8W x 0.5t 5 Gasket 40.8 6.8 6.2 4.85 LW-VL2M 6.8 4.85 LW-VL2 2 60.5 Screw Terminal * 5.5 8.5 43 9 43 PC Board Terminal 18.7 2 4.9 28 Solder/Tab Terminal Square Flush Guard Terminal Cover M3 Terminal Screw Mounting Bracket 6.8 4.85 Locking Ring 4.85 6.2 6.8 Terminal Cover LW-VL2M Panel Thickness 0.8 to 3.2 LW-VL2 6.8 6.8 8.2 2.0 LOCK TOP Gasket 54 61.9 5.4 31 15 1.2 5 14 6 6 1.2 5 40.3 Tab Terminal 2.8W x 0.5t PC Board Terminal 0.8W x 0.5t 2 60.5 Screw Terminal 16 5.5 43 PC Board Terminal * 9 8.5 43 18.7 2 4.9 Solder/Tab Terminal 28 All dimensions in mm. Flush Silhouette Switches LW Series Pushbuttons C 16.2 NC NO C 18.2 X1 NC X2 NO X2 16.2 23.2 K C K C K C LO LO LO R18 R18 R18 Bottom View 25 25 25.4 26.5 Solder/Tab Terminal Terminal Arrangement (Bottom View) PC Board Drilling Layout Solder/Tab Terminal (Bottom View) 1.6 (PC Board) 6.80.05 2.4 (0.5) NO NO NO NO NO NC Terminal NO Terminal Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal is only available in DPDT configuration. Switch Switch Switch Terminal Terminal Terminal 3C 2C 1C (0.8) (0.8) C C C C C COM Terminal Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. 5 4.85 (0.5) 5 0 2.4 9-o 1.2 +0.1 6.80.05 (0.5) (0.8) NC NC TOP 1 2.8 Screw Terminal NC NC 3 NC TOP 2 2.8 PC Board Terminal 2.8 Screw Terminal Soldered Side Mounting Side All dimensions in mm. Applicable Crimping Terminal o3.0 min. 6.0 max. 3 max. 4.0 min. 17 Flush Silhouette Switches LW Series Selector Switches Selector Switches with Round Metal Bezel Package Quantity: 1 Shape Round Metal Bezel LW6MS (Knob Operator) Operation 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Round Metal Bezel LW6MS-L (Lever Operator) 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Position Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R * For contact operation and dimensions, see page 21. 18 Contact Material Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Solder/Tab Terminal LW6MS-2C1 LW6MS-2C2 LW6MS-2C3 LW6MS-2C5 LW6MS-2C6 LW6MS-2C7 LW6MS-21C1 LW6MS-21C2 LW6MS-21C3 LW6MS-21C5 LW6MS-21C6 LW6MS-21C7 LW6MS-3C2 LW6MS-3C3 LW6MS-3C6 LW6MS-3C7 LW6MS-31C2 LW6MS-31C3 LW6MS-31C6 LW6MS-31C7 LW6MS-32C2 LW6MS-32C3 LW6MS-32C6 LW6MS-32C7 LW6MS-33C2 LW6MS-33C3 LW6MS-33C6 LW6MS-33C7 LW6MS-2LC1 LW6MS-2LC2 LW6MS-2LC3 LW6MS-2LC5 LW6MS-2LC6 LW6MS-2LC7 LW6MS-21LC1 LW6MS-21LC2 LW6MS-21LC3 LW6MS-21LC5 LW6MS-21LC6 LW6MS-21LC7 LW6MS-3LC2 LW6MS-3LC3 LW6MS-3LC6 LW6MS-3LC7 LW6MS-31LC2 LW6MS-31LC3 LW6MS-31LC6 LW6MS-31LC7 LW6MS-32LC2 LW6MS-32LC3 LW6MS-32LC6 LW6MS-32LC7 LW6MS-33LC2 LW6MS-33LC3 LW6MS-33LC6 LW6MS-33LC7 Part No. PC Board Terminal LW6MS-2C1V LW6MS-2C2V LW6MS-2C3V -- -- -- LW6MS-21C1V LW6MS-21C2V LW6MS-21C3V -- -- -- LW6MS-3C2V LW6MS-3C3V -- -- LW6MS-31C2V LW6MS-31C3V -- -- LW6MS-32C2V LW6MS-32C3V -- -- LW6MS-33C2V LW6MS-33C3V -- -- LW6MS-2LC1V LW6MS-2LC2V LW6MS-2LC3V -- -- -- LW6MS-21LC1V LW6MS-21LC2V LW6MS-21LC3V -- -- -- LW6MS-3LC2V LW6MS-3LC3V -- -- LW6MS-31LC2V LW6MS-31LC3V -- -- LW6MS-32LC2V LW6MS-32LC3V -- -- LW6MS-33LC2V LW6MS-33LC3V -- -- Screw Terminal -- LW6MS-2C2M -- -- LW6MS-2C6M -- -- LW6MS-21C2M -- -- LW6MS-21C6M -- LW6MS-3C2M -- LW6MS-3C6M -- LW6MS-31C2M -- LW6MS-31C6M -- LW6MS-32C2M -- LW6MS-32C6M -- LW6MS-33C2M -- LW6MS-33C6M -- -- LW6MS-2LC2M -- -- LW6MS-2LC6M -- -- LW6MS-21LC2M -- -- LW6MS-21LC6M -- LW6MS-3LC2M -- LW6MS-3LC6M -- LW6MS-31LC2M -- LW6MS-31LC6M -- LW6MS-32LC2M -- LW6MS-32LC6M -- LW6MS-33LC2M -- LW6MS-33LC6M -- Flush Silhouette Switches LW Series Selector Switches Selector Switches with Round Black Plastic Bezel Package Quantity: 1 Shape Round Black Plastic Bezel LW6S (Knob Operator) Operation 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Round Black Plastic Bezel LW6S-L (Lever Operator) 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Position Contact Material Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Solder/Tab Terminal LW6S-2C1 LW6S-2C2 LW6S-2C3 LW6S-2C5 LW6S-2C6 LW6S-2C7 LW6S-21C1 LW6S-21C2 LW6S-21C3 LW6S-21C5 LW6S-21C6 LW6S-21C7 LW6S-3C2 LW6S-3C3 LW6S-3C6 LW6S-3C7 LW6S-31C2 LW6S-31C3 LW6S-31C6 LW6S-31C7 LW6S-32C2 LW6S-32C3 LW6S-32C6 LW6S-32C7 LW6S-33C2 LW6S-33C3 LW6S-33C6 LW6S-33C7 LW6S-2LC1 LW6S-2LC2 LW6S-2LC3 LW6S-2LC5 LW6S-2LC6 LW6S-2LC7 LW6S-21LC1 LW6S-21LC2 LW6S-21LC3 LW6S-21LC5 LW6S-21LC6 LW6S-21LC7 LW6S-3LC2 LW6S-3LC3 LW6S-3LC6 LW6S-3LC7 LW6S-31LC2 LW6S-31LC3 LW6S-31LC6 LW6S-31LC7 LW6S-32LC2 LW6S-32LC3 LW6S-32LC6 LW6S-32LC7 LW6S-33LC2 LW6S-33LC3 LW6S-33LC6 LW6S-33LC7 Part No. PC Board Terminal LW6S-2C1V LW6S-2C2V LW6S-2C3V -- -- -- LW6S-21C1V LW6S-21C2V LW6S-21C3V -- -- -- LW6S-3C2V LW6S-3C3V -- -- LW6S-31C2V LW6S-31C3V -- -- LW6S-32C2V LW6S-32C3V -- -- LW6S-33C2V LW6S-33C3V -- -- LW6S-2LC1V LW6S-2LC2V LW6S-2LC3V -- -- -- LW6S-21LC1V LW6S-21LC2V LW6S-21LC3V -- -- -- LW6S-3LC2V LW6S-3LC3V -- -- LW6S-31LC2V LW6S-31LC3V -- -- LW6S-32LC2V LW6S-32LC3V -- -- LW6S-33LC2V LW6S-33LC3V -- -- Screw Terminal -- LW6S-2C2M -- -- LW6S-2C6M -- -- LW6S-21C2M -- -- LW6S-21C6M -- LW6S-3C2M -- LW6S-3C6M -- LW6S-31C2M -- LW6S-31C6M -- LW6S-32C2M -- LW6S-32C6M -- LW6S-33C2M -- LW6S-33C6M -- -- LW6S-2LC2M -- -- LW6S-2LC6M -- -- LW6S-21LC2M -- -- LW6S-21LC6M -- LW6S-3LC2M -- LW6S-3LC6M -- LW6S-31LC2M -- LW6S-31LC6M -- LW6S-32LC2M -- LW6S-32LC6M -- LW6S-33LC2M -- LW6S-33LC6M -- * For contact operation and dimensions, see page 21. 19 Flush Silhouette Switches LW Series Selector Switches Selector Switches with Square Black Plastic Bezel Package Quantity: 1 Shape Square Black Plastic Bezel LW7S (Knob Operator) Operation 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Square Black Plastic Bezel LW7S-L (Lever Operator) 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Position Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C * For contact operation and dimensions, see page 21. 20 Contact Material Gold R Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Solder/Tab Terminal LW7S-2C1 LW7S-2C2 LW7S-2C3 LW7S-2C5 LW7S-2C6 LW7S-2C7 LW7S-21C1 LW7S-21C2 LW7S-21C3 LW7S-21C5 LW7S-21C6 LW7S-21C7 LW7S-3C2 LW7S-3C3 LW7S-3C6 LW7S-3C7 LW7S-31C2 LW7S-31C3 LW7S-31C6 LW7S-31C7 LW7S-32C2 LW7S-32C3 LW7S-32C6 LW7S-32C7 LW7S-33C2 LW7S-33C3 LW7S-33C6 LW7S-33C7 LW7S-2LC1 LW7S-2LC2 LW7S-2LC3 LW7S-2LC5 LW7S-2LC6 LW7S-2LC7 LW7S-21LC1 LW7S-21LC2 LW7S-21LC3 LW7S-21LC5 LW7S-21LC6 LW7S-21LC7 LW7S-3LC2 LW7S-3LC3 LW7S-3LC6 LW7S-3LC7 LW7S-31LC2 LW7S-31LC3 LW7S-31LC6 LW7S-31LC7 LW7S-32LC2 LW7S-32LC3 LW7S-32LC6 LW7S-32LC7 LW7S-33LC2 LW7S-33LC3 LW7S-33LC6 LW7S-33LC7 Part No. PC Board Terminal LW7S-2C1V LW7S-2C2V LW7S-2C3V -- -- -- LW7S-21C1V LW7S-21C2V LW7S-21C3V -- -- -- LW7S-3C2V LW7S-3C3V -- -- LW7S-31C2V LW7S-31C3V -- -- LW7S-32C2V LW7S-32C3V -- -- LW7S-33C2V LW7S-33C3V -- -- LW7S-2LC1V LW7S-2LC2V LW7S-2LC3V -- -- -- LW7S-21LC1V LW7S-21LC2V LW7S-21LC3V -- -- -- LW7S-3LC2V LW7S-3LC3V -- -- LW7S-31LC2V LW7S-31LC3V -- -- LW7S-32LC2V LW7S-32LC3V -- -- LW7S-33LC2V LW7S-33LC3V -- -- Screw Terminal -- LW7S-2C2M -- -- LW7S-2C6M -- -- LW7S-21C2M -- -- LW7S-21C6M -- LW7S-3C2M -- LW7S-3C6M -- LW7S-31C2M -- LW7S-31C6M -- LW7S-32C2M -- LW7S-32C6M -- LW7S-33C2M -- LW7S-33C6M -- -- LW7S-2LC2M -- -- LW7S-2LC6M -- -- LW7S-21LC2M -- -- LW7S-21LC6M -- LW7S-3LC2M -- LW7S-3LC6M -- LW7S-31LC2M -- LW7S-31LC6M -- LW7S-32LC2M -- LW7S-32LC6M -- LW7S-33LC2M -- LW7S-33LC6M -- Flush Silhouette Switches LW Series Selector Switches Contact Operation Operation Operator Position and Contact Position (Top View) Left Right Contact Left Contact L NO NC NO NC SPDT DPDT R Left Contact NO NC NO NC C C C C C C C NO NC NO NC C C C Left Center Right Contact Contact Contact Right Contact NO NC NO NC C C C Left Center Right Contact Contact Contact Left Center Right Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC C C 3PDT 45 3-Position C Right Left Contact DPDT NO NC NO NC NO NC NO NC NO NC NO NC Right Contact R C 3PDT 90 2-Position C Left Center Right Contact Contact Contact Center Right Left Contact Contact Contact Left Contact Right Contact NO NC NO NC L C Contact Right Contact Left Contact Right Contact Operation Operator Position and Contact Position (Top View) Left Center C C C C C C C * SPDT has C, NO, and NC only in the center of the terminal. Dimensions Panel Thickness 0.8 to 3.2 M3 Terminal Screw Terminal Cover LW-VL2 2.6 2-R0.6 Solder/Tab Terminal 6.8 4.85 6.8 LOCK TOP 8.2 2.0 1.0 1.2 6.8 6.2 Mounting Bracket Locking Ring 6.8 4.85 Terminal Cover LW-VL2M Gasket 54 61.9 1.2 Square Bezel (Knob Operator) 5 6 6 1.2 5 Round Bezel (Knob Operator) Tab Terminal 2.8W x 0.5t PC Board Terminal 0.8W x 0.5t 5.5 Screw Terminal 8.5 43 9 PC Board Terminal 18.7 2 10 Solder/Tab Terminal Round Bezel (Lever Operator) 17.0 R18 R18 Solder/Tab Terminal (Bottom View) Switch Switch Switch Terminal Terminal Terminal 3C 2C 1C (0.8) (0.8) COM Terminal 5 2.8 2.8 NO Terminal 5 NC Terminal Soldered Side Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. NC NO C NC NO C NC Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal is only available in DPDT configuration. Applicable Crimping Terminal o3.0 min. 2.4 (0.5) (0.8) 4.85 (0.5) 2.4 6.80.05 (0.5) 2.8 1.6 (PC Board) 6.80.05 NO PC Board Drilling Layout C NC Solder/Tab Terminal NO PC Board Terminal C Screw Terminal NO 26.5 TOP 1 C 25 TOP 2 3 25 Screw Terminal NC 16.2 18.2 NC NO C X1 C NC X2 NO X2 16.2 K 23.2 C LO K Terminal Arrangement (Bottom View) 25.4 0 Square Bezel (Lever Operator) 2 18 C LO K C LO R18 Bottom View 9-o 1.2 +0.1 28 8 43 o2 2 60.5 Mounting Side 6.0 max. 3 max. 4.0 min. All dimensions in mm. 21 Flush Silhouette Switches LW Series Illuminated Selector Switches Illuminated Selector Switches with Round Metal / Black Plastic Bezel Package Quantity: 1 Shape Round Metal Bezel LW6MF (Knob Operator) Operation 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Round Black Plastic Bezel LW6F (Knob Operator) 90 2-position Maintained 90 2-position Spring Return from Right 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Position Contact Material Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver Gold L R Silver Gold L R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver L C Gold R Silver * For Color Code and Operating Voltage Code , see page 23. 22 Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Solder/Tab Terminal LW6MF-2C1 LW6MF-2C2 LW6MF-2C3 LW6MF-2C5 LW6MF-2C6 LW6MF-2C7 LW6MF-21C1 LW6MF-21C2 LW6MF-21C3 LW6MF-21C5 LW6MF-21C6 LW6MF-21C7 LW6MF-3C2 LW6MF-3C3 LW6MF-3C6 LW6MF-3C7 LW6MF-31C2 LW6MF-31C3 LW6MF-31C6 LW6MF-31C7 LW6MF-32C2 LW6MF-32C3 LW6MF-32C6 LW6MF-32C7 LW6MF-33C2 LW6MF-33C3 LW6MF-33C6 LW6MF-33C7 LW6F-2C1 LW6F-2C2 LW6F-2C3 LW6F-2C5 LW6F-2C6 LW6F-2C7 LW6F-21C1 LW6F-21C2 LW6F-21C3 LW6F-21C5 LW6F-21C6 LW6F-21C7 LW6F-3C2 LW6F-3C3 LW6F-3C6 LW6F-3C7 LW6F-31C2 LW6F-31C3 LW6F-31C6 LW6F-31C7 LW6F-32C2 LW6F-32C3 LW6F-32C6 LW6F-32C7 LW6F-33C2 LW6F-33C3 LW6F-33C6 LW6F-33C7 Part No. PC Board Terminal LW6MF-2C1V LW6MF-2C2V LW6MF-2C3V -- -- -- LW6MF-21C1V LW6MF-21C2V LW6MF-21C3V -- -- -- LW6MF-3C2V LW6MF-3C3V -- -- LW6MF-31C2V LW6MF-31C3V -- -- LW6MF-32C2V LW6MF-32C3V -- -- LW6MF-33C2V LW6MF-33C3V -- -- LW6F-2C1V LW6F-2C2V LW6F-2C3V -- -- -- LW6F-21C1V LW6F-21C2V LW6F-21C3V -- -- -- LW6F-3C2V LW6F-3C3V -- -- LW6F-31C2V LW6F-31C3V -- -- LW6F-32C2V LW6F-32C3V -- -- LW6F-33C2V LW6F-33C3V -- -- Screw Terminal -- LW6MF-2C2M -- -- LW6MF-2C6M -- -- LW6MF-21C2M -- -- LW6MF-21C6M -- LW6MF-3C2M -- LW6MF-3C6M -- LW6MF-31C2M -- LW6MF-31C6M -- LW6MF-32C2M -- LW6MF-32C6M -- LW6MF-33C2M -- LW6MF-33C6M -- -- LW6F-2C2M -- -- LW6F-2C6M -- -- LW6F-21C2M -- -- LW6F-21C6M -- LW6F-3C2M -- LW6F-3C6M -- LW6F-31C2M -- LW6F-31C6M -- LW6F-32C2M -- LW6F-32C6M -- LW6F-33C2M -- LW6F-33C6M -- Flush Silhouette Switches LW Series Illuminated Selector Switches Illuminated Selector Switches with Square Black Plastic Bezel Package Quantity: 1 Shape Operation Square Black Plastic Bezel LW7F (Knob Operator) Position Contact Material Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Gold 90 2-position Maintained L R Silver Gold 90 2-position Spring Return from Right L R Silver 45 3-position Maintained C L Gold R Silver 45 3-position Spring Return from Right C L Gold R Silver 45 3-position Spring Return from Left C L Gold R Silver 45 3-position Spring Return Two-way C L R Gold Silver Color Code and Operating Voltage Code Lens/LED Color Code Specify a Lens/LED color code in place of in the Part No. Part No. PC Board Terminal LW7F-2C1V LW7F-2C2V LW7F-2C3V -- -- -- LW7F-21C1V LW7F-21C2V LW7F-21C3V -- -- -- LW7F-3C2V LW7F-3C3V -- -- LW7F-31C2V LW7F-31C3V -- -- LW7F-32C2V LW7F-32C3V -- -- LW7F-33C2V LW7F-33C3V -- -- Solder/Tab Terminal LW7F-2C1 LW7F-2C2 LW7F-2C3 LW7F-2C5 LW7F-2C6 LW7F-2C7 LW7F-21C1 LW7F-21C2 LW7F-21C3 LW7F-21C5 LW7F-21C6 LW7F-21C7 LW7F-3C2 LW7F-3C3 LW7F-3C6 LW7F-3C7 LW7F-31C2 LW7F-31C3 LW7F-31C6 LW7F-31C7 LW7F-32C2 LW7F-32C3 LW7F-32C6 LW7F-32C7 LW7F-33C2 LW7F-33C3 LW7F-33C6 LW7F-33C7 Screw Terminal -- LW7F-2C2M -- -- LW7F-2C6M -- -- LW7F-21C2M -- -- LW7F-21C6M -- LW7F-3C2M -- LW7F-3C6M -- LW7F-31C2M -- LW7F-31C6M -- LW7F-32C2M -- LW7F-32C6M -- LW7F-33C2M -- LW7F-33C6M -- Operating Voltage Code Specify an operating voltage code in place of in the Part No. 2: 6V AC/DC 3: 12V AC/DC 4: 24V AC/DC A: amber G: green PW: pure white R: red S: blue W: white Y: yellow * Every illuminated selector switch contains an LED lamp (LSTD) of the specified color and voltage. A pure white LED lamp is used for yellow illumination. * For replacement LED lamps, see page 38. Contact Operation Operation Operator Position and Contact Position (Top View) Left Right Contact Left Contact L R SPDT DPDT Right Contact NO NC NO NC C Left Contact NO NC NO NC C C NO NC NO NC NO NC C C C C C Right Contact NO NC NO NC Right Left Contact Right Contact NO NC NO NC DPDT C C Left Contact R C C Left Center Right Contact Contact Contact NO NC NO NC NO NC C Right Contact NO NC NO NC Left Center Right Contact Contact Contact 3PDT C Contact Right Contact L Center Right Left Contact Contact Contact 90 2-Position Left Contact Operation Operator Position and Contact Position (Top View) Left Center NO NC NO NC NO NC 45 3-Position C C Left Center Right Contact Contact Contact C Left Center Right Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC C C 3PDT C C C C C C C 23 Flush Silhouette Switches LW Series Illuminated Selector Switches Dimensions Panel Thickness 0.8 to 3.2 Terminal Cover LW-VL2 M3 Terminal Screw Mounting Bracket 2.6 6.8 4.85 4.85 6.8 1.2 6.8 6.8 6.2 2.0 LOCK TOP 8.2 1.0 Locking Ring 6.5 Terminal Cover LW-VL2M 2-R0.6 Solder/Tab Terminal Gasket 54 61.9 1.2 1.2 5 6 6 5 Square Bezel Round Bezel Tab Terminal 2.8W x 0.5t PC Board Terminal 0.8W x 0.5t 5.5 Screw Terminal 43 8.5 43 9 PC Board Terminal 18.7 2 10 28 o2 8 2 60.5 Solder/Tab Terminal R18 C 16.2 18.2 NC NO C C X1 NC X2 NO X2 16.2 K 23.2 LO K K C C LO LO R18 R18 Bottom View 25 25.4 Screw Terminal 25 26.5 PC Board Terminal Solder/Tab Terminal Terminal Arrangement (Bottom View) Solder/Tab Terminal (0.8) (0.8) 2.8 3 max. NC NO 4.0 min. 2.8 2.8 2.4 6.0 max. 2.4 5 5 NC Terminal NO Terminal COM Terminal Switch Switch Terminal Terminal 2C 1C C NC NO NO C (0.8) 0 Lamp Terminal X1 Lamp Terminal X2 Lamp Terminal X2 Soldered Side Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. 24 C NO C (0.5) .2 +0.1 Lamp Switch Terminal Terminal 3C X1 NO C 6.80.05 (0.5) 4.85 (0.5) -o1 o3.0 min. 1.6 (PC Board) 6.80.05 12 X2 Applicable Crimping Terminal (Bottom View) 6.50.05 (0.5) Lamp Terminal X2 PC Board Drilling Layout Lamp Terminal Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Lamp terminals do not have any polarity. NC NC TOP 1 X2 X1 Lamp Terminal Lamp Terminal (interconnected) 2 NC TOP 3 Screw Terminal Mounting Side All dimensions in mm. Flush Silhouette Switches LW Series Key Selector Switches Key Selector Switches with Round Metal Bezel (2-Position and 3-Position) Shape Operation Key retained at Round Metal Bezel LW6MK Contact Material Gold A L R Silver 90 2-position Maintained Gold B L R Silver Gold C L R Silver 90 2-position Spring Return from Right Gold L R B Silver A L C Gold R Silver B L C Gold R Silver C L C Gold R Silver 45 3-position Maintained D L C Gold R Silver E L C Gold R Silver G L C Gold R Silver H L C Gold R Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT Solder/Tab Terminal LW6MK-2C1A LW6MK-2C2A LW6MK-2C3A LW6MK-2C5A LW6MK-2C6A LW6MK-2C7A LW6MK-2C1B LW6MK-2C2B LW6MK-2C3B LW6MK-2C5B LW6MK-2C6B LW6MK-2C7B LW6MK-2C1C LW6MK-2C2C LW6MK-2C3C LW6MK-2C5C LW6MK-2C6C LW6MK-2C7C LW6MK-21C1B DPDT LW6MK-21C2B 3PDT SPDT LW6MK-21C3B LW6MK-21C5B DPDT LW6MK-21C6B 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT LW6MK-21C7B LW6MK-3C2A LW6MK-3C3A LW6MK-3C6A LW6MK-3C7A LW6MK-3C2B LW6MK-3C3B LW6MK-3C6B LW6MK-3C7B LW6MK-3C2C LW6MK-3C3C LW6MK-3C6C LW6MK-3C7C LW6MK-3C2D LW6MK-3C3D LW6MK-3C6D LW6MK-3C7D LW6MK-3C2E LW6MK-3C3E LW6MK-3C6E LW6MK-3C7E LW6MK-3C2G LW6MK-3C3G LW6MK-3C6G LW6MK-3C7G LW6MK-3C2H LW6MK-3C3H LW6MK-3C6H LW6MK-3C7H Package Quantity: 1 Part No. PC Board Screw Terminal Terminal LW6MK-2C1VA -- LW6MK-2C2VA LW6MK-2C2MA LW6MK-2C3VA -- -- -- -- LW6MK-2C6MA -- -- LW6MK-2C1VB -- LW6MK-2C2VB LW6MK-2C2MB LW6MK-2C3VB -- -- -- -- LW6MK-2C6MB -- -- LW6MK-2C1VC -- LW6MK-2C2VC LW6MK-2C2MC LW6MK-2C3VC -- -- -- -- LW6MK-2C6MC -- -- LW6MK-21C1VB -- LW6MKLW6MK-21C2VB 21C2MB LW6MK-21C3VB -- -- -- LW6MK-- 21C6MB -- -- LW6MK-3C2VA LW6MK-3C2MA LW6MK-3C3VA -- -- LW6MK-3C6MA -- -- LW6MK-3C2VB LW6MK-3C2MB LW6MK-3C3VB -- -- LW6MK-3C6MB -- -- LW6MK-3C2VC LW6MK-3C2MC LW6MK-3C3VC -- -- LW6MK-3C6MC -- -- LW6MK-3C2VD LW6MK-3C2MD LW6MK-3C3VD -- -- LW6MK-3C6MD -- -- LW6MK-3C2VE LW6MK-3C2ME LW6MK-3C3VE -- -- LW6MK-3C6ME -- -- LW6MK-3C2VG LW6MK-3C2MG LW6MK-3C3VG -- -- LW6MK-3C6MG -- -- LW6MK-3C2VH LW6MK-3C2MH LW6MK-3C3VH -- -- LW6MK-3C6MH -- -- 25 Flush Silhouette Switches LW Series Key Selector Switches Shape Contact Material Key retained at Operation Round Metal Bezel LW6MK B C L Gold R Silver 45 3-position Spring Return from Right D C L Gold R Silver G C L Gold R Silver C C L Gold R Silver 45 3-position Spring Return from Left D C L Gold R Silver H C L Gold R Silver C L 45 3-position Spring Return Two-way DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT Solder/Tab Terminal LW6MK-31C2B LW6MK-31C3B LW6MK-31C6B LW6MK-31C7B LW6MK-31C2D LW6MK-31C3D LW6MK-31C6D LW6MK-31C7D LW6MK-31C2G LW6MK-31C3G LW6MK-31C6G LW6MK-31C7G LW6MK-32C2C LW6MK-32C3C LW6MK-32C6C LW6MK-32C7C LW6MK-32C2D LW6MK-32C3D LW6MK-32C6D LW6MK-32C7D LW6MK-32C2H LW6MK-32C3H LW6MK-32C6H LW6MK-32C7H LW6MK-33C2D LW6MK-33C3D LW6MK-33C6D Part No. PC Board Terminal LW6MK-31C2VB LW6MK-31C3VB -- -- LW6MK-31C2VD LW6MK-31C3VD -- -- LW6MK-31C2VG LW6MK-31C3VG -- -- LW6MK-32C2VC LW6MK-32C3VC -- -- LW6MK-32C2VD LW6MK-32C3VD -- -- LW6MK-32C2VH LW6MK-32C3VH -- -- LW6MK-33C2VD LW6MK-33C3VD -- LW6MK-31C2MB -- LW6MK-31C6MB -- LW6MK-31C2MD -- LW6MK-31C6MD -- LW6MK-31C2MG -- LW6MK-31C6MG -- LW6MK-32C2MC -- LW6MK-32C6MC -- LW6MK-32C2MD -- LW6MK-32C6MD -- LW6MK-32C2MH -- LW6MK-32C6MH -- LW6MK-33C2MD -- LW6MK-33C6MD 3PDT LW6MK-33C7D -- -- Contact Gold R Screw Terminal D Silver * Key is retained in position and removable in position. * Two keys are supplied. * Key cylinder face material: Metal * To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied the default key. Example: LW6MK-2C1A-501 500 (default key) to 515 Other than the above 16 numbers, 44 additional key numbers are available upon request. Contact Operation Operation Operator Position and Contact Position (Top View) Left Right Contact Left Contact L R SPDT DPDT Right Contact NO NC NO NC C 26 Left Contact NO NC NO NC C C NO NC NO NC NO NC C C C C C Right Contact NO NC NO NC Right Left Contact Right Contact NO NC NO NC DPDT C C Left Contact R C C Left Center Right Contact Contact Contact NO NC NO NC NO NC C Right Contact NO NC NO NC Left Center Right Contact Contact Contact 3PDT C Contact Right Contact L Center Right Left Contact Contact Contact 90 2-Position Left Contact Operation Operator Position and Contact Position (Top View) Left Center NO NC NO NC NO NC 45 3-Position C C Left Center Right Contact Contact Contact C Left Center Right Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC C C 3PDT C C C C C C C Flush Silhouette Switches LW Series Key Selector Switches Key Selector Switches with Black Plastic Bezel (2-Position and 3-Position) Package Quantity: 1 Shape Operation Key retained at Round Black Plastic Bezel LW6K Contact Material Gold A L R Silver 90 2-position Maintained Gold B L R Silver Gold C L R Silver 90 2-position Spring Return from Right Gold B L R Silver A L C Gold R Silver B L C Gold R Silver C L C Gold R Silver 45 3-position Maintained D L C Gold R Silver E L C Gold R Silver G L C Gold R Silver H L C Gold R Silver Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT Solder/Tab Terminal LW6K-2C1A LW6K-2C2A LW6K-2C3A LW6K-2C5A LW6K-2C6A LW6K-2C7A LW6K-2C1B LW6K-2C2B LW6K-2C3B LW6K-2C5B LW6K-2C6B LW6K-2C7B LW6K-2C1C LW6K-2C2C LW6K-2C3C LW6K-2C5C LW6K-2C6C LW6K-2C7C LW6K-21C1B LW6K-21C2B LW6K-21C3B LW6K-21C5B LW6K-21C6B LW6K-21C7B LW6K-3C2A LW6K-3C3A LW6K-3C6A LW6K-3C7A LW6K-3C2B LW6K-3C3B LW6K-3C6B LW6K-3C7B LW6K-3C2C LW6K-3C3C LW6K-3C6C LW6K-3C7C LW6K-3C2D LW6K-3C3D LW6K-3C6D LW6K-3C7D LW6K-3C2E LW6K-3C3E LW6K-3C6E LW6K-3C7E LW6K-3C2G LW6K-3C3G LW6K-3C6G LW6K-3C7G LW6K-3C2H LW6K-3C3H LW6K-3C6H LW6K-3C7H Part No. PC Board Terminal LW6K-2C1VA LW6K-2C2VA LW6K-2C3VA -- -- -- LW6K-2C1VB LW6K-2C2VB LW6K-2C3VB -- -- -- LW6K-2C1VC LW6K-2C2VC LW6K-2C3VC -- -- -- LW6K-21C1VB LW6K-21C2VB LW6K-21C3VB -- -- -- LW6K-3C2VA LW6K-3C3VA -- -- LW6K-3C2VB LW6K-3C3VB -- -- LW6K-3C2VC LW6K-3C3VC -- -- LW6K-3C2VD LW6K-3C3VD -- -- LW6K-3C2VE LW6K-3C3VE -- -- LW6K-3C2VG LW6K-3C3VG -- -- LW6K-3C2VH LW6K-3C3VH -- -- Screw Terminal -- LW6K-2C2MA -- -- LW6K-2C6MA -- -- LW6K-2C2MB -- -- LW6K-2C6MB -- -- LW6K-2C2MC -- -- LW6K-2C6MC -- -- LW6K-21C2MB -- -- LW6K-21C6MB -- LW6K-3C2MA -- LW6K-3C6MA -- LW6K-3C2MB -- LW6K-3C6MB -- LW6K-3C2MC -- LW6K-3C6MC -- LW6K-3C2MD -- LW6K-3C6MD -- LW6K-3C2ME -- LW6K-3C6ME -- LW6K-3C2MG -- LW6K-3C6MG -- LW6K-3C2MH -- LW6K-3C6MH -- 27 Flush Silhouette Switches LW Series Key Selector Switches Shape Contact Material Key retained at Operation Round Black Plastic Bezel LW6K C L B Gold R Silver 45 3-position Spring Return from Right C L D Gold R Silver C L G Gold R Silver C L C Gold R Silver 45 3-position Spring Return from Left C L D Gold R Silver C L H Gold R Silver 45 3-position Spring Return Two-way C L D Gold R DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT 3PDT DPDT Solder/Tab Terminal LW6K-31C2B LW6K-31C3B LW6K-31C6B LW6K-31C7B LW6K-31C2D LW6K-31C3D LW6K-31C6D LW6K-31C7D LW6K-31C2G LW6K-31C3G LW6K-31C6G LW6K-31C7G LW6K-32C2C Part No. PC Board Terminal LW6K-31C2VB LW6K-31C3VB -- -- LW6K-31C2VD LW6K-31C3VD -- -- LW6K-31C2VG LW6K-31C3VG -- -- LW6K-32C2VC LW6K-32C3VC Contact Silver 3PDT LW6K-32C3C DPDT LW6K-32C6C 3PDT LW6K-32C7C DPDT LW6K-32C2D LW6K-32C2VD 3PDT LW6K-32C3D LW6K-32C3VD DPDT LW6K-32C6D Screw Terminal LW6K-31C2MB -- LW6K-31C6MB -- LW6K-31C2MD -- LW6K-31C6MD -- LW6K-31C2MG -- LW6K-31C6MG -- LW6K-32C2MC -- -- LW6K-32C6MC -- -- LW6K-32C2MD -- -- LW6K-32C6MD 3PDT LW6K-32C7D DPDT LW6K-32C2H LW6K-32C2VH -- -- 3PDT LW6K-32C3H LW6K-32C3VH DPDT LW6K-32C6H LW6K-32C2MH -- -- LW6K-32C6MH 3PDT LW6K-32C7H DPDT LW6K-33C2D LW6K-33C2VD -- LW6K-33C3VD 3PDT LW6K-33C3D DPDT LW6K-33C6D -- 3PDT LW6K-33C7D -- -- LW6K-33C2MD -- LW6K-33C6MD -- * Key is retained in position and removable in position. * Two keys are supplied. * Key cylinder face material: Metal * To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied the default key. Example: LW6MK-2C1A-501 500 (default key) to 515 Other than the above 16 numbers, 44 additional key numbers are available upon request. Contact Operation Operation Operator Position and Contact Position (Top View) Left Right Contact Left Contact L R SPDT DPDT Right Contact NO NC NO NC C Center Right Left Contact Contact Contact NO NC NO NC NO NC 28 NO NC NO NC C C C C C C Left Contact Right Contact NO NC NO NC Right Left Contact Right Contact NO NC NO NC R 3PDT NO NC NO NC NO NC C Right Contact NO NC NO NC Left Center Right Contact Contact Contact C Left Contact C 3PDT C Operator Position and Contact Position (Top View) Left Center Contact DPDT Right Contact L C 90 2-Position Left Contact Operation C C Left Center Right Contact Contact Contact NO NC NO NC NO NC 45 3-Position C C C C C Left Center Right Contact Contact Contact C Left Center Right Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC C C C C C C Flush Silhouette Switches LW Series Key Selector Switches Dimensions Mounting Bracket Locking Ring LW-VL2 2-R0.6 Solder/Tab Terminal Gasket 54 61.9 3.4 Tab Terminal 2.8W x 0.5t 2 60.5 5.5 Screw Terminal 43 8.5 43 9 PC Board Terminal 18.7 o2 8 5 6 6 1.2 1.2 PC Board Terminal 0.8W x 0.5t 5 2.6 1.2 6.8 6.8 8.2 LOCK TOP 2.0 1.0 6.8 4.85 4.85 6.8 Terminal Cover LW-VL2M 6.2 Panel Thickness 0.8 to 3.2 Terminal Cover M3 Terminal Screw 2 26.4 Solder/Tab Terminal C 16.2 NC NO C 18.2 X1 NC X2 NO X2 16.2 23.2 K K C C LO LO K C LO R18 R18 R18 Bottom View 25 25 25.4 26.5 Screw Terminal PC Board Terminal Solder/Tab Terminal Terminal Arrangement (Bottom View) Solder/Tab Terminal NC NO C NO C PC Board Drilling Layout NO NO C NC Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal is only available in DPDT configuration. NC NC NO C NC TOP 1 C TOP 2 3 Screw Terminal Applicable Crimping Terminal (Bottom View) o3.0 min. 6.80.05 NO Terminal 6.0 max. 4.0 min. 2.8 3 max. 2.8 NC Terminal 2.8 2.4 (0.5) 5 (0.5) 5 0 1.6 (PC Board) 6.80.05 (0.5) 4.85 (0.8) 9-o 1.2 +0.1 (0.8) (0.8) 2.4 COM Terminal Switch Switch Switch Terminal Terminal Terminal 3C 2C 1C Soldered Side Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. Mounting Side All dimensions in mm. 29 Flush Silhouette Switches LW Series Ring-illuminated Key Selector Switches Ring-illuminated Key Selector Switches with Round Metal Bezel (2- and 3-position) Package Quantity: 1 Shape Key retained Contact Contact Material at Operation Round Metal Bezel LW6MJ SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Gold L A R Silver Gold 90 2-position Maintained L B R Silver Gold L C R Silver 90 2-position Spring Return from Right Gold L B R Silver Solder/Tab Terminal LW6MJ-2C14A LW6MJ-2C24A LW6MJ-2C34A LW6MJ-2C54A LW6MJ-2C64A LW6MJ-2C74A LW6MJ-2C14B LW6MJ-2C24B LW6MJ-2C34B LW6MJ-2C54B LW6MJ-2C64B LW6MJ-2C74B LW6MJ-2C14C LW6MJ-2C24C LW6MJ-2C34C LW6MJ-2C54C LW6MJ-2C64C LW6MJ-2C74C LW6MJ-21C14B LW6MJ-21C24B LW6MJ-21C34B LW6MJ-21C54B LW6MJ-21C64B LW6MJ-21C74B Part No. PC Board Terminal LW6MJ-2C14VA LW6MJ-2C24VA LW6MJ-2C34VA -- -- -- LW6MJ-2C14VB LW6MJ-2C24VB LW6MJ-2C34VB -- -- -- LW6MJ-2C14VC LW6MJ-2C24VC LW6MJ-2C34VC -- -- -- Ring Illumination Color Code Screw Terminal -- LW6MJ-2C24MA -- -- LW6MJ-2C64MA -- -- LW6MJ-2C24MB -- -- LW6MJ-2C64MB -- -- LW6MJ-2C24MC -- -- GG: green/green PWPW: pure white/ pure white RR: red/red LW6MJ-2C64MC -- -- LW6MJ-21C14VB LW6MJ-21C24VB LW6MJ-21C24MB -- LW6MJ-21C34VB -- -- -- LW6MJ-21C64MB -- -- * Specify a color code in place of in the Type No. SS (blue/blue) is also available. * For details on illumination, see page 34. * Two keys are supplied. * Key cylinder face material: Metal * To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied the default key. Example: LW6MJ-2C14RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. Contact Operation Operation Operator Position and Contact Position (Top View) Left Right Contact Left Contact L R SPDT DPDT Right Contact NO NC NO NC Left Contact C C C C C C C Right Contact NO NC NO NC Right Left Contact Right Contact NO NC NO NC DPDT C C Left Contact Center Right Contact Contact C C NO NC NO NC NO NC NO NC NO NC NO NC C Left Contact R Center Right Contact Contact 3PDT Right Contact NO NC NO NC C C Center Right Contact Contact NO NC NO NC NO NC 30 Left Contact NO NC NO NC C C Contact Right Contact L Left Contact 90 2-Position Left Contact Operation Operator Position and Contact Position (Top View) Left Center 45 3-Position C C Left Contact Center Right Contact Contact C C NO NC NO NC NO NC C Left Contact Center Right Contact Contact C C NO NC NO NC NO NC 3PDT C C C Flush Silhouette Switches LW Series Ring-illuminated Key Selector Switches Shape Round Metal Bezel LW6MJ Key retained Contact Contact Material at Solder/Tab Terminal DPDT LW6MJ-3C24A Gold C 3PDT LW6MJ-3C34A L R A DPDT LW6MJ-3C64A Silver 3PDT LW6MJ-3C74A DPDT LW6MJ-3C24B Gold C 3PDT LW6MJ-3C34B L R B DPDT LW6MJ-3C64B Silver 3PDT LW6MJ-3C74B DPDT LW6MJ-3C24C Gold C 3PDT LW6MJ-3C34C L R C DPDT LW6MJ-3C64C Silver 3PDT LW6MJ-3C74C DPDT LW6MJ-3C24D Gold 45 C 3PDT LW6MJ-3C34D L R D 3-position DPDT LW6MJ-3C64D Maintained Silver 3PDT LW6MJ-3C74D DPDT LW6MJ-3C24E Gold C 3PDT LW6MJ-3C34E L R E DPDT LW6MJ-3C64E Silver 3PDT LW6MJ-3C74E DPDT LW6MJ-3C24G Gold C 3PDT LW6MJ-3C34G L R G DPDT LW6MJ-3C64G Silver 3PDT LW6MJ-3C74G DPDT LW6MJ-3C24H Gold C 3PDT LW6MJ-3C34H L R H DPDT LW6MJ-3C64H Silver 3PDT LW6MJ-3C74H DPDT LW6MJ-31C24B Gold C 3PDT LW6MJ-31C34B L R B DPDT LW6MJ-31C64B Silver 3PDT LW6MJ-31C74B 45 DPDT LW6MJ-31C24D Gold 3-position C 3PDT LW6MJ-31C34D L R Spring D DPDT LW6MJ-31C64D Return Silver 3PDT LW6MJ-31C74D from Right DPDT LW6MJ-31C24G Gold C 3PDT LW6MJ-31C34G L R G DPDT LW6MJ-31C64G Silver 3PDT LW6MJ-31C74G DPDT LW6MJ-32C24C Gold C 3PDT LW6MJ-32C34C L R C DPDT LW6MJ-32C64C Silver 3PDT LW6MJ-32C74C 45 DPDT LW6MJ-32C24D Gold 3-position C 3PDT LW6MJ-32C34D L R Spring D DPDT LW6MJ-32C64D Return Silver 3PDT LW6MJ-32C74D from Left DPDT LW6MJ-32C24H Gold C 3PDT LW6MJ-32C34H L R H DPDT LW6MJ-32C64H Silver 3PDT LW6MJ-32C74H DPDT LW6MJ-33C24D 45 Gold C 3PDT LW6MJ-33C34D 3-position L R D Spring Return DPDT LW6MJ-33C64D Silver Two-way 3PDT LW6MJ-33C74D Operation Part No. PC Board Terminal LW6MJ-3C24VA LW6MJ-3C34VA -- -- LW6MJ-3C24VB LW6MJ-3C34VB -- -- LW6MJ-3C24VC LW6MJ-3C34VC -- -- LW6MJ-3C24VD LW6MJ-3C34VD -- -- LW6MJ-3C24VE LW6MJ-3C34VE -- -- LW6MJ-3C24VG LW6MJ-3C34VG -- -- LW6MJ-3C24VH LW6MJ-3C34VH -- -- LW6MJ-31C24VB LW6MJ-31C34VB -- -- LW6MJ-31C24VD LW6MJ-31C34VD -- -- LW6MJ-31C24VG LW6MJ-31C34VG -- -- LW6MJ-32C24VC LW6MJ-32C34VC -- -- LW6MJ-32C24VD LW6MJ-32C34VD -- -- Screw Terminal LW6MJ-3C24MA -- LW6MJ-3C64MA -- LW6MJ-3C24MB -- LW6MJ-3C64MB -- LW6MJ-3C24MC -- LW6MJ-3C64MC -- LW6MJ-3C24MD -- LW6MJ-3C64MD -- LW6MJ-3C24ME -- LW6MJ-3C64ME -- LW6MJ-3C24MG -- LW6MJ-3C64MG -- LW6MJ-3C24MH -- LW6MJ-3C64MH -- LW6MJ-31C24MB -- LW6MJ-31C64MB -- LW6MJ-31C24MD -- LW6MJ-31C64MD -- LW6MJ-31C24MG -- LW6MJ-31C64MG -- LW6MJ-32C24MC -- LW6MJ-32C64MC -- LW6MJ-32C24MD -- LW6MJ-32C64MD -- LW6MJ-32C24VH LW6MJ-32C24MH -- LW6MJ-32C34VH -- LW6MJ-32C64MH -- -- LW6MJ-33C24VD LW6MJ-33C24MD -- LW6MJ-33C34VD -- LW6MJ-33C64MD -- -- Ring Illumination Color Code GG: green/green PWPW: pure white/ pure white RG: red/green RR:red/red * Specify a color code in place of in the Part No. GR (green/red), SS (blue/blue) are also available. * For details on illumination, see page 34. * Two keys are supplied. * Key cylinder face material: Metal * To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied the default key. Example: LW6MJ-3C24RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. * See page 30 for contact operation. 31 Flush Silhouette Switches LW Series Ring-illuminated Key Selector Switches Ring-illuminated Key Selector Switches with Round Plastic Bezel (2- and 3-position) Package Quantity: 1 Shape Key retained at Operation Round Black Plastic Bezel LW6J Contact Contact Material SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Gold L A R Silver Gold 90 2-position Maintained L B R Silver Gold L C R Silver 90 2-position Spring Return from Right Gold L B R Silver Solder/Tab Terminal LW6J-2C14A LW6J-2C24A LW6J-2C34A LW6J-2C54A LW6J-2C64A LW6J-2C74A LW6J-2C14B LW6J-2C24B LW6J-2C34B LW6J-2C54B LW6J-2C64B LW6J-2C74B LW6J-2C14C LW6J-2C24C LW6J-2C34C LW6J-2C54C LW6J-2C64C LW6J-2C74C LW6J-21C14B LW6J-21C24B LW6J-21C34B LW6J-21C54B LW6J-21C64B LW6J-21C74B Part No. PC Board Terminal LW6J-2C14VA LW6J-2C24VA LW6J-2C34VA -- -- -- LW6J-2C14VB LW6J-2C24VB LW6J-2C34VB -- -- -- LW6J-2C14VC LW6J-2C24VC LW6J-2C34VC -- -- -- LW6J-21C14VB LW6J-21C24VB LW6J-21C34VB -- -- -- Ring Illumination Color Code Screw Terminal -- LW6J-2C24MA -- -- LW6J-2C64MA -- -- LW6J-2C24MB -- -- LW6J-2C64MB -- -- LW6J-2C24MC -- -- LW6J-2C64MC -- -- LW6J-21C24MB -- -- LW6J-21C64MB -- GG: green/green PWPW: pure white/ pure white RR: red/red * Specify a color code in place of in the Part No. SS (blue/blue) is also available. * For details on illumination, see page 34. * Two keys are supplied. * Key cylinder face material: Metal * To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied the default key. Example: LW6J-2C14RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. Contact Operation Operation Operator Position and Contact Position (Top View) Left Right Contact Left Contact L R SPDT DPDT Right Contact NO NC NO NC Left Contact C C C C C C C Right Contact NO NC NO NC Right Left Contact Right Contact NO NC NO NC DPDT C C Left Contact Center Right Contact Contact C C NO NC NO NC NO NC NO NC NO NC NO NC C Left Contact R Center Right Contact Contact 3PDT Right Contact NO NC NO NC C C Center Right Contact Contact NO NC NO NC NO NC 32 Left Contact NO NC NO NC C C Contact Right Contact L Left Contact 90 2-Position Left Contact Operation Operator Position and Contact Position (Top View) Left Center 45 3-Position C C Left Contact Center Right Contact Contact C C NO NC NO NC NO NC C Left Contact Center Right Contact Contact C C NO NC NO NC NO NC 3PDT C C C Flush Silhouette Switches LW Series Ring-illuminated Key Selector Switches Shape Operation Round Black Plastic Bezel LW6J 45 3-position Maintained 45 3-position Spring Return from Right 45 3-position Spring Return from Left 45 3-position Spring Return Two-way Key retained Contact Contact Material at Solder/Tab Terminal DPDT LW6J-3C24A Gold C 3PDT LW6J-3C34A L R A DPDT LW6J-3C64A Silver 3PDT LW6J-3C74A DPDT LW6J-3C24B Gold C 3PDT LW6J-3C34B L R B DPDT LW6J-3C64B Silver 3PDT LW6J-3C74B DPDT LW6J-3C24C Gold C 3PDT LW6J-3C34C L R C DPDT LW6J-3C64C Silver 3PDT LW6J-3C74C DPDT LW6J-3C24D Gold C 3PDT LW6J-3C34D L R D DPDT LW6J-3C64D Silver 3PDT LW6J-3C74D DPDT LW6J-3C24E Gold C 3PDT LW6J-3C34E L R E DPDT LW6J-3C64E Silver 3PDT LW6J-3C74E DPDT LW6J-3C24G Gold C 3PDT LW6J-3C34G L R G DPDT LW6J-3C64G Silver 3PDT LW6J-3C74G DPDT LW6J-3C24H Gold C 3PDT LW6J-3C34H L R H DPDT LW6J-3C64H Silver 3PDT LW6J-3C74H DPDT LW6J-31C24B Gold C 3PDT LW6J-31C34B L R B DPDT LW6J-31C64B Silver 3PDT LW6J-31C74B DPDT LW6J-31C24D Gold C 3PDT LW6J-31C34D L R D DPDT LW6J-31C64D Silver 3PDT LW6J-31C74D DPDT LW6J-31C24G Gold C 3PDT LW6J-31C34G L R G DPDT LW6J-31C64G Silver 3PDT LW6J-31C74G DPDT LW6J-32C24C Gold C 3PDT LW6J-32C34C L R C DPDT LW6J-32C64C Silver 3PDT LW6J-32C74C DPDT LW6J-32C24D Gold C 3PDT LW6J-32C34D L R D DPDT LW6J-32C64D Silver 3PDT LW6J-32C74D DPDT LW6J-32C24H Gold C 3PDT LW6J-32C34H L R H DPDT LW6J-32C64H Silver 3PDT LW6J-32C74H DPDT LW6J-33C24D Gold C 3PDT LW6J-33C34D L R D DPDT LW6J-33C64D Silver 3PDT LW6J-33C74D Part No. PC Board Terminal LW6J-3C24VA LW6J-3C34VA -- -- LW6J-3C24VB LW6J-3C34VB -- -- LW6J-3C24VC LW6J-3C34VC -- -- LW6J-3C24VD LW6J-3C34VD -- -- LW6J-3C24VE LW6J-3C34VE -- -- LW6J-3C24VG LW6J-3C34VG -- -- LW6J-3C24VH LW6J-3C34VH -- -- LW6J-31C24VB LW6J-31C34VB -- -- LW6J-31C24VD LW6J-31C34VD -- -- LW6J-31C24VG LW6J-31C34VG -- -- LW6J-32C24VC LW6J-32C34VC -- -- LW6J-32C24VD LW6J-32C34VD -- -- LW6J-32C24VH LW6J-32C34VH -- -- LW6J-33C24VD LW6J-33C34VD -- -- Screw Terminal LW6J-3C24MA -- LW6J-3C64MA -- LW6J-3C24MB -- LW6J-3C64MB -- LW6J-3C24MC -- LW6J-3C64MC -- LW6J-3C24MD -- LW6J-3C64MD -- LW6J-3C24ME -- LW6J-3C64ME -- LW6J-3C24MG -- LW6J-3C64MG -- LW6J-3C24MH -- LW6J-3C64MH -- LW6J-31C24MB -- LW6J-31C64MB -- LW6J-31C24MD -- LW6J-31C64MD -- LW6J-31C24MG -- LW6J-31C64MG -- LW6J-32C24MC -- LW6J-32C64MC -- LW6J-32C24MD -- LW6J-32C64MD -- LW6J-32C24MH -- LW6J-32C64MH -- LW6J-33C24MD -- LW6J-33C64MD -- Ring Illumination Color Code GG: green/green PWPW: pure white/ pure white RG: red/green RR: red/red * Specify a color code in place of in the Part No. GR (green/red), SS (blue/blue) are also available. * For details on illumination, see page 34. * Two keys are supplied. * Key cylinder face material: Metal * To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied the default key. Example: LW6J-3C24RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. * See page 32 for contact operation. 33 Flush Silhouette Switches LW Series Ring-illuminated Key Selector Switches 6.8 1.2 Round 8 Solder/Tab Terminal Width 2.8 x 0.5t R18 X1 NC NC X2 NO NO X2 C C 16.2 NC NO C 18.2 X1 NC X2 NO X2 C Mounting Hole Layout 6 6 1.2 5 PC Board Terminal Width 0.8 x 0.5t 2- R 0.6 300 25 26.2 Screw Terminal PC Board Terminal Solder/Tab Terminal 54 o2 61.9 25 25.4 6.8 2.0 16.2 TOP 8.2 23.2 Locking Ring 6.8 4.85 4.85 6.8 6.2 Rubber Gasket Mounting Bracket K C LO Panel Thickness 0.8 to 3.2 K C LO Terminal Cover LW-VL2 K C LO Terminal Cover LW-VL2M M3 Screw Terminal R18 Bottom View R18 Dimensions 5.5 Screw Terminal 1.2 5 2 60.5 43 1 2.6 8.5 9 PC Board Terminal 18.7 43 3.4 18 26.4 Solder/Tab Terminal Mounting centers Vertical: 28 mm minimum Horizontal: 33 mm minimum Note: Determine the mounting centers to ensure ease of operation. Terminal Arrangement (Bottom View) Solder/Tab Terminal PC Board Terminal Screw Terminal TOP TOP Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal is only available in DPDT configuration. Illumination Internal Circuit Full Illumination Left Illumination /HIW,OOXPLQDWLRQ Right Illumination :LUHFRORU %URZQ :LUHFRORU %ODFN 5LJKW,OOXPLQDWLRQ 5HVLVWRU /('&KLS 3URWHFWLRQ'LRGH :LUHFRORU 5HG =HQHU'LRGH ,OOXPLQDWLRQ5DWHG9ROWDJH9'& PC Board Drilling Layout (Bottom View) Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. 5 NO Terminal 2.8 o3.0 min. 6.0 max. 3 max. 4.0 min. 2.8 5 NC Terminal 2.8 (0.5) 2.4 (0.5) 1.6 (PC Board) 2 6.80.05 (0.5) (0.8) 6.80.05 4.85 Applicable Crimping Terminal 9- 34 Switch Switch Switch Terminal Terminal Terminal 3C 2C 1C 2.4 2 . o1 (0.8) (0.8) COM Terminal .1 +0 0 Soldered Side 5.5 Mounting Side All dimensions in mm. Flush Silhouette Switches LW Series Accessories Accessories Material Part No. Package Quantity LW9Z-T1 1 * Used to tighten the locking ring when installing the control unit into a panel. * Tightening torque: 1.2 N*m Rubber (black) (Nytril) OR-55 1 * Used to install and remove LED lamps. 60 o11.6 Lamp Holder Tool .4 Metal (nickel-plated brass) 5 o2 Locking Ring Wrench Dimensions (mm) OR-55 14 Shape 59 Lens Removal Tool Rubber (Ring: metal) MT-S01 1 * Used to remove the lens. * Switch guard accessory comes with lens. * Cannot be used with maintained types (momentary buttons only). * Specify a lens color code in place of in the Part No. A: amber, C: clear, G: green, PW (pure white), R: red, S: blue, Y: yellow * Use a clear lens for white illumination or for white (LW) or black (LB) buttons. Switch Guard with Lens (for Square Flush Lens) Spring Return Guard LW9Z-KS7 Panel Thickness 0.8 to 3.2 1 Mounting Hole Layout 26.8 48 min. 31.7 Polyarylate (Guard: transparent) Lens 43 6 24.5 12.5 9 28 min. 25 Note: Determine mounting centers to ensure easy operation. LW9Z-BS7 1 1 8 0.8 to 3.2 26 o2 2 28 0.8 to 3.2 * Degree of protection: IP65 * Panel thickness: 0.8 to 3.2 mm * See page 5 for mounting hole layout. 26 2 28 32 12 22 18.2 14 NC 24 * For units with removable contact block only. 11 1 21 LW-VL2 34 Polyamide (translucent) X1 14.8 X2 Terminal Cover For Solder/Tab Terminal Plug: Polyamide (black) Gasket: Nitryl Mounting bracket: PBT LW9Z-BS6 * Degree of protection: IP65 * Panel thickness: 0.8 to 3.2 mm * See page 5 for mounting hole layout. NO 31 Square Mounting Hole Plug Plug: Polyamide (black) Gasket: Nitryl Mounting bracket: PBT X2 Round Mounting Hole Plug C 26.2 Polyamide (black) LW-VL2M 1 * For units with removable contact block only. 12.9 5.4 19.2 Polyamide (translucent) 7.5 LW-PVL 1 * For unibody pilot lights only. X1 o20.6 Terminal Cover For Solder/Tab Terminal 23.2 25.4 Terminal Cover For Screw Terminal Terminal Cover For Screw Terminal TOP X2 Polyamide (translucent) o20.6 X1 LW-PVLM 1 * For unibody pilot lights only. TOP X2 4 14 35 Flush Silhouette Switches LW Series Accessories Accessories Shape Material Part No. Package Quantity Dimensions (mm) Rubber Boot for Round Flush 0 o3 1 * Degree of protection: IP65 * Panel thickness: 0.8 to 3.2 mm 4 LW9Z-D61 0 o3 Rubber (transparent silicon rubber) LW9Z-D62 1 * Degree of protection: IP65 * Panel thickness: 0.8 to 3.2 mm LW9Z-D71 1 * Degree of protection: IP65 * Panel thickness: 0.8 to 3.2 mm 4 Rubber Boot for Square Flush 30 7.6 Rubber Boot for Round Extended 36 Flush Silhouette Switches LW Series Maintenance Parts Maintenance Parts Shape Material Part No. Ordering No. Package Quantity Color Code Lens (Round Flush) Polyarylate LW9Z-L1 LW9Z-L1PN05 5 Polyarylate LW9Z-L12 LW9Z-L12PN05 5 Lens (Round Extended) Lens (Square Flush) Polyarylate LW9Z-L2 LW9Z-L2PN05 5 Lens for Pilot Lights (Round Extended) Polyarylate LW9Z-L15 LW9Z-L15PN05 5 Polyarylate LW9Z-L25 LW9Z-L25PN05 5 Specify a lens color code in place of in the Part No. A: amber C: clear G: green R: red S: blue Y: yellow Note: Use a clear lens for white illumination or for white (LW), PW (pure white), or black (LB) buttons. Lens for Pilot Lights (Square Extended) Specify a lens color code in place of Illuminated Selector Knob Operator in the Part No. AS Plastic Marking Plate (Round) White LW9Z-FD6 LW9Z-FD6 LW9Z-P1W LW9Z-P1WPN05 Acrylic Marking Plate (Square) Black (Note) LW9Z-P1B LW9Z-P1BPN05 White LW9Z-P2W LW9Z-P2WPN05 Acrylic Marking Plate (Round Extended) Black LW9Z-P2B LW9Z-P2BPN05 White LW9Z-P12W LW9Z-P12WPN05 Black LW9Z-P12B LW9Z-P12BPN05 LW9Z-LN LW9Z-LNPN05 LW9ZSK-500 LW9Z-SK-500PN2 Acrylic 1 * A: amber, G: green, R: red, S: blue, W: white, Y: yellow Use W (white) handle for PW (pure white) illumination. 5 * For round flush pushbuttons, round flush illuminated pushbuttons, and round extended pilot lights. Note: Used for black (LB) button only. 5 * For square flush pushbuttons, square flush illuminated pushbuttons, and square extended pilot lights. Note: Used for black (LB) button only. 5 * For round extended pushbuttons and round extended illuminated pushbuttons. Note: Used for black (LB) button only. 5 * Black Locking Ring Plastic Spare Key Metal (nickel-plated brass) * Standard - default key 2 LW9Z-SK- LW9Z-SK-PN02 * Specify a key number 501 to 515 in place of in the Part No. 37 Flush Silhouette Switches LW Series Maintenance Parts LED Lamps Dimensions (20.8) 18.4 2.4 Voltage Base (x2) BA9S/13 Grommet (x1) Current Draw AC DC Operating Voltage Part No. 7 mA (A, R, W) 5.5 mA (G, PW, S) LSTD-6 11 mA 10 mA LSTD-1 11 mA 10 mA 6V AC/ DC10% 8 mA 12V AC/ DC10% 24V AC/ DC10% Illumination Color Code Ordering No. Package Quantity 1 LSTD-6 LSTD-2 Base Specify a color code in place of in the Ordering No. LSTD-6PN10 A: amber G: green LSTD-1 PW: pure white R: red LSTD-1PN10 S: blue W: white LSTD-2 Use a pure white (PW) LED lamp with yellow (Y) lens. LSTD-2PN10 10 1 BA9S/13 10 1 10 Din Rail Mount Transformer Shape Secondary Voltage Primary Voltage For 6V Part No. 100/110V AC TWR516 115/120V AC TWR5126 200/220V AC TWR526 230/240V AC 5.5V AC, 1W Applicable Load LSTD-6 LED lamp (6V AC/DC) or LS-6 incandescent lamp (6V AC/DC, 1W) TWR5246 380V AC TWR5386 400/440V AC TWR546 480V AC TWR5486 Dimensions Shock Resistance Dielectric Strength Terminal Screw Applicable Wire 100 M minimum (500V DC megger) -30 to +60C (no freezing) 35 to 85% RH (no condensation) Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Damage limits: 1,000 m/s2 2,500V AC, 1 minute M3.5 2 mm2 maximum, 2 wires maximum 2-o3.3 Mounting Hole 2 22 30 JAPAN PRI. Secondary Side Primary Side 40 48 52 Terminal Cover 40 41 45.5 Vibration Resistance 600V M3.5 Terminal Screw 1 Current Draw Rated Insulation Voltage Insulation Resistance Operating Temperature Operating Humidity 100/110V AC, 115/120V AC, 200/220V AC, 230/240V AC, 380V AC, 400/440V AC, 480V AC (50/60Hz) 2.4 VA 3 Operating Voltage SEC. 4 Specifications BAA1000 Accessories DIN Rail Part No. BAA1000 BAP1000 Ordering No. BAA1000PN10 BAP1000PN10 Length 1000 mm 1000 mm Weight (approx.) 200g 320g Material Aluminum Steel Package Quantity 10 10 End Clip BNL6 Ordering No. BNL6PN10 Applicable DIN Rail BAA1000 BAP1000 Weight (approx.) 15g Material Steel (Zinc-plated) Package Quantity Dimensions (24) Part No. 10 45 **Use plastic end clip BC9Z-E/NS35N when using 400/440V AC primary voltage transformers. 38 9 Flush Silhouette Switches LW Series Instructions Safety Precautions * Turn off the power to the flush silhouette LW series control units before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or fire hazard. * To avoid burning your hand, use the lamp holder tool when replacing lamps. * For wiring, use wires of a proper size to meet voltage and current requirements. Solder correctly according to the instructions in "Wiring" and "Notes on Terminal Cover." Tighten the M3.5 terminal screws to a torque of 0.6 to 1.0 N*m. Failure to tighten terminal screws may cause over heating and fire. Instructions Locking lever TOP marking [Removing the Lens Unit] 2. Remove the marking plate by push ing the lens from the rear to disen gage the latches between the lens and the lens holder, using a screw driver as shown below. For LW series illuminated pushbuttons and pilot lights, legends and symbols can be engraved on marking plates, or printed film can be inserted under the lens for labelling purposes. Marking Plate and Marking Film Size Lens Round Lens Square Lens Engraving Area Engraving Area 17.5 o17.8 0.6 TOP side Removal 1. To remove the lens unit, press the suction cup of the optional lens removal tool (MT-S01) onto the lens and pull the lens unit out. Marking Plate and Film 0.85 Locking Ring Replacement of the Lens and Marking Plate 0.85 Removing the Contact Block Turn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact can be removed. Installing the Contact Block Insert the contact block, with the TOP markings on the contact block and the operator placed in the same direction. Then lock the units, turning the locking lever in the direction of the arrow. Built-in Marking Plate Panel Mounting * Engraving must be made on the engraving area within 0.5mm deep. * The marking plate is made of acrylic resin. Contact block Locked position Panel Mounting Remove the locking ring and mounting bracket from the operator. Insert the operator into the panel cut-out from the front. With the TOP marking of the operator in the correct direction, insert the mounting bracket from the back of the panel and tighten with a locking nut. Notes on Mounting Use the optional locking ring wrench (LW9Z-T1) to mount the operator into the panel. Tightening torque should not exceed 1.2 N*m. Do not use pliers. Excessive tightening will damage the locking ring. Collective Mounting As the locking lever can be turned easily from the rear of the units using a screwdriver, the contact blocks can be removed even when mounted collectively. Note: The translucent filter in the lens holder cannot be removed because the filter is sealed to make the unit waterproof and oiltight. Installing 1. For round lenses, place the marking plate on the lens holder with the anti-rotation projection engaged and press the lens into the lens holder to engage the latches. For square lenses, insert the marking plate into the lens, and press the lens into the holder to engage the latches. 2. Make sure of the correct orientation of the marking plate. Round Lens 19.8 19.8 Mounting Bracket Operator Applicable Marking Film [Removing the Lens] 17.7 * Two 0.1mm-thick films or one 0.2mm-thick film can be installed in the lens. * Marking film must be prepared separately. * Recommended marking film: Polyester Insertion Order of Marking Plate and Film * Round Lens TOP Marking Side Lens Film Marking Plate Lens Holder Housing Note: Film must be prepared separately. Square Lens TOP Marking Side Lens Marking Plate Lens Holder Lens * Square Lens Film Marking Plate Lens Holder Housing Note: Film must be prepared separately. Make sure of correct orientation of the marking plate. Lens Marking Plate Lens Holder 39 Flush Silhouette Switches LW Series Instructions Instructions Replacement of Lamps Lamps can be replaced using the lamp holder tool (OR-55) from the front of the panel, or by removing the contact block from the operator. soldering. Top end Removing the Lamp To remove, slip the lamp holder tool onto the lamp head. Then push slightly, and turn the lamp holder tool counterclockwise. Notes on Wiring When installing a terminal cover onto the solder/tab terminal contact block, solder the inside of lamp terminal (toward the switch terminals) and wire. Lowest rib Lamp Terminal Switch Terminals Inside Key Selector Switches * When turning the key, do not pull the key out, otherwise, it may cause damage to the switches. Lamp Holder Tool OR-55 Installing the Lamp 1. To install, insert the lamp head into the lamp holder tool, and hold the lamp as shown in the figure below. LED Lamp Lamp Holder Tool 2. Insert the pins on the lamp base into the grooves in the lamp socket. Insert the lamp and turn it clock wise. Lamp Socket in the Operator Unit Removing the Illuminated Selector Switch Knob Removing the Knob Insert a flat screwdriver and remove the knob from the operator. Installing the Knob Press the knob into the operator. Align the recess on top end of the knob with the lowest rib on the operator. Pushbuttons/Illuminated Pushbuttons with Guards/ Switch Guard with Lens Terminal Cover [Screw Terminal] Install the terminal cover on the con trol unit before wiring. * Do not apply load on the guard in the direction other than the opening/closing the guard. Otherwise the hinge part will be damaged. Note 1: After wiring, terminal covers can not be installed. Note 2: When terminal covers are installed, ring type crimping termi nals cannot be used. (For wiring, use fork terminals or lead wires directly.) Wiring Single Board Mounting 1. Solder the terminals within 20W/5 sec or 260C/3 sec without exert ing external force to the terminals. While soldering, do not touch the soldering iron to the housing. While wiring, prevent tension from being applied to the terminals. Do not bend or raise the terminals, nor exert excessive force to terminals. 2. Use non-corrosive liquid flux. 3. Positive-lock connector and easy lock connectors are applicable to tab terminals. 4. Tighten the terminal screw of the screw terminal to a torque of 0.6 to 1.0 N*m. Notes on Terminal Cover [Solder/Tab Terminal] Insert the terminal cover into the con tact block with the TOP markings on the contact block and the terminal cover in the same direction. Note: When wiring, insert the lead wires into the terminal cover holes before Mounting the control units on a single PC board offers the following features. 1. Reduced installation labor, easy wiring, space saving, and stan dardization. 2. Since the contact blocks on the PC board can be removed easily using a locking lever, control units are easy to maintain. 3. Because the control units require no studs for fastening the control units to a PC board, special preparation of the panel is not needed. 4. For details on single board mount ing, contact IDEC. Specifications and other descriptions in this catalog are subject to change without notice. 6-64, Nishi-Miyahara 2-Chome, Yodogawa-ku, Osaka 532-0004, Japan Tel: +81-6-6398-2527, Fax: +81-6-6398-2547 E-mail: marketing@idec.co.jp IDEC CORPORATION (USA) IDEC IZUMI (H.K.) CO., LTD. Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 E-mail: service@eu.idec.com Tel: +852-2803-8989, Fax: +852-2565-0171 E-mail: info@hk.idec.com IDEC (SHANGHAI) CORPORATION IDEC TAIWAN CORPORATION IDEC CANADA LIMITED Tel: +86-21-6135-1515 Fax: +86-21-6135-6225 / +86-21-6135-6226 E-mail: idec@cn.idec.com Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 E-mail: service@tw.idec.com IDEC (BEIJING) CORPORATION Tel: +65-6746-1155, Fax: +65-6844-5995 E-mail: info@sg.idec.com Tel: +1-905-890-8561, Toll Free: (888) 317-IDEC (4332) Fax: +1-905-890-8562 E-mail: sales@ca.idec.com IDEC AUSTRALIA PTY. LTD. Tel: +61-3-8523-5900, Toll Free: 1800-68-4332 Fax: +61-3-8523-5999 E-mail: sales@au.idec.com www.idec.com IDEC ELEKTROTECHNIK GmbH Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246 E-mail: opencontact@idec.com Tel: +86-10-6581-6131, Fax: +86-10-6581-5119 IDEC IZUMI ASIA PTE. LTD. IDEC (SHENZHEN) CORPORATION IDEC ASIA (THAILAND) CO.,LTD. Tel: +86-755-8356-2977, Fax: +86-755-8356-2944 Tel: +662-392-9765, Fax: +662-392-9768 E-mail: sales@th.idec.com Cat. No. EP1460-1 FEBRUARY 2016 PDF