THE INFORMATION CONTAINED HEREIN IS CONSIDERED PRUPRIETARY TO BEL FUSE INC, AND SHALL NOT BE COPIED, REPRUDUCED UR DISCLOSED WITHOUT THE WRITTEN APPROVAL UF BEL FUSE INC, PRELIMINARY ROHS 2002/95/EC LED =| + | GREEN | ,, + | =| ORANGE \ FLECTRICAL CHARACTERISTICS @ 25C GREEN nae SCHEMATIC TURNS RATIO 12 RI40 TP1 ICT + 1CT +2% TP2 ICT + 1CT +2% - _ TP3 ICT : 107 +27 TRDI- 1 1 TRPit+ TP4 ICT : 1CT +2% as OCL @ 100kKHzZ/100mVRMS es fA ___] 8mA DC BIAS 350uH MIN, TRDI+ 2 3/2 TRPI1- INS, LOSS O.1MHz TO 1MHz -1,1 dB MAX TRDe- 3 13 TRPet+ 65MHz TO 100MHz -0.8 dB MAX a 100MHz TO 125MHz -1,2 oB MAX - TRPS RET. LOSS (MIND @ 1000HMS +157 TRDe+ 4 0,5MHz-40MHz -18 oB AQOMHz-100MHz -12+20LOG(f/80MHz> oB TRDS- = 4 TRPS3+ oy oetz oom tebe 100kHz - 100MHz -30 dB MIN CM TO) DM REJ TRD3+ 6 15 TRP3- 100kHz - 100MHz -35 oB MIN HIPUT (Isolation Voltage): TRD4- 7 17 TRP4+ RuI-8 TD SHIELD 1500 Vrns toy RJ1-8 TO PIN1-10 1500 Vrms tt amd PINI-10 TU SHIELD 800 VDC TRD4+ & | 8 TRP4- 10042 UF PRUDUCTION TESTED TO COMPLY WITH TEEE 802.3 ISULATION REQUIREMENTS, 4X /2 UHMS LED TRDCTIZ27374 9 VF CFURWARD VULTAGED IF =2e@0mA GREEN e.2V TYP, URANGE COV TYP, 10 1000pF 2kV AD CDUMINANT WAVELENGTH) IF=20mA GREEN S690nmM TYP. DRANGE 610nm TYP. SHINE PER PERT? UIPERATING TEMPERATURE: -40C TO 85C SHIELD ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. WANCHUNG CHOW 04-25-08 2X8 gigabit MagJack 08632X8RDA-F TOL. IN INCH bel DRAWN BY DATE (8 Cores, Ext, Temp FILE NAME a ee components, WEIDE LEE 04-25-08 YEOSCABR- DATE 08632X8RDA-F_PADWG FX + Pert ee ee DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLUSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. P R E E | M | \ A\ R Y ROHS 2002/95/EC 7 OJ <4 aD 2 IN = = = = A 2 iN A A A A A A +l +I fi ff f fh fp fe yn Oe 1.220 [30.991 _ a A a 4,530 [115.06] Ci = PORT 2 LED PORT 12 St aun PF ey UPPER PORT A = c ny LED = RI4 | ns -@ o5 86 5S LOWER PORT Sr mer ear rear rear A so 8 26 328s Ca Cu 7 Sa NOTE a mt am a a a a TOS Wont C pt 2 A5 1 Feietretnctrscretreticd 242 [6177 AQ UT tO PO OO Pd OW | ) PORT 1 0.425 [10.801 PURT 11 0.185 [4,70] 0,055+0,020 [1.40+0,511 TES: 4,300 [109.22] PLASTIC HUUSING: THERMUPLASTIC PBT F LAMMABILITY RATING UL 94V-0 CUNTACT PLATING: 30 MICRU-INCH HARD GULD PLATING WUTPUT PINS: TIN-CUATED CUPPER WIRE, DIA 0.018 INCH, METAL SHIELD: NICKEL PLATED UN CUPPER ALLUY, CALL GRUUND LEADS ARE SULDER DIPPED JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, PART 68 SUBPART F., ) ) MARK PART WITH MFG LOGO, FMG NAME, PART NUMBER AND DATE CODE. 0.990 113,96] cSALis UL RECOGNIZED - FILE #196366 AND 169987. TYPICAL 3, RoHS COMPLIANCE, PER EU DIRECTIVE 2002/95/EC. ORIGINATED BY DATE PART NO. / DRAWING NO. STANDARD DIM. ANTON LIAD 04-25-08 2X8 gigabit MagJack 08632X8RDA-F TOL. IN_INCH pel DRAWN BY DATE (8 Cores, Ext. Temp) FILE NAME xT Ascans + nya [ste aa COMPONENTS.) ne _ _ _~NA CONNECTED CHEN TING 04-25-06 weer pesaexerDa-r_pADWG |S Eaeop] -@)-S=g [ences 3 | DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC, AND SHALL NOT BE RoHS | COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, } le LE | | M I N A\ x Y PURT ASSIGNMENT LOWER \ UPPER (COMPONENT SIDE VIEW) DECK ll le 12/11 / 1J/e!'13/4/5/6/71819 /10]11 /12/138114115/16 CO) | 4.290 [108.971 | K- PIN-UUT INFURMATIUN y An CCOMPUNENT SIDE VIEW) GRN_ (+)/0RG ) AY, Y GRN (-)/ORG (+) Y 9 TTRCT1/2/3/4 8 ITRD 4+ a 0.145 [3.68] 2 {TRD 4 yo Oo SG 4590 [116.59] _6 [TRD 3+ s, 2 Ss TRD 3- Cu 4 - LF) See = Oo 86 THE SHADED AREA ON THE CUSTOMER BOARD ARE TRD 1+ 4a 8S 6 RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR TRD 1- COMPONENT PAD. ORIGINATED BY DATE PART NO. / DRAWING NO. STANDARD DIM. ANTON LIAQ 04-25-08 2X8 gigabit MagJack 08632X8RDA-F TOL. IN_INCH Del DRAWN BY DATE (8 Cores. Ext, Temp>d FILE NAME xX | SCALE - N/A SIZE - Ad componenTs<// 1863. 2X8R_DALE x YS 3 are CHEN TING 04-25-08 08632XERDA-F_PADWG |~Yo-tsona | = Odlpace a] DCO002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE RoHS COPIED, REPRODUCED OR DISCLOSED WITHOUT THE df WRITTEN APPROVAL OF BEL FUSE INC. 4,.COD [106.81] PRE| TMINARY 3,699 [92.84] 3,105 [78.87] Cid00DD 164.90) C,.005 [350,93] Q.000 [13,97] 1.455 [36.96] 0.905 [22,99] ~~ 0.270 [6.861 999 12.0c! 0.070 [1.78] 0.160 [4.06] - 0.050 [1.27] _ 0.010 [0.25] 0.015 [0.38] _ 160X 90,035 32X 90.045 [01.14] [00.897 AX 90,062 [91,571 + | | | | Po ; t cI cI Lo CC / wT D OO | te - CC O o O Oo -& 0 He 0 oO O O O O O O Oo Oo Oo Oo 5a O Oo Oo Oo Oo O Oo O O Oo Oo Oo | Oo O Oo O O O Oo O : CX M0128 L%3.2d] Noo _ R0.030 [R0.76] <> mJ =m ro SR HAR HS ce PLACES 0.110 [2,791 TON os Se 0.290 [7,37] ~ 2 PLACES {gegR28ss sou e2@etgc 110 [2.73] 2 PLACES 4,300 [109,221] Recommended PCB front edge Cutout, The bottom shield ground SUGGESTED FOOTPRINT Sn the top of the PCB. pe seated (COMPONENT SIDE VIEW) | ORIGINATED BY DATE PART NO. / DRAWING NO. STANDARD DIM. ANTON LIAD 04-25-08 2X8 gigabit MagJack 08632X8RDA-F TOL. IN INCH Del DRAWN BY DATE (8 Cores, Ext. Temp)d FILE NAME a ae SCALE: N/A comvoncarrs:2 0863-2X8R-DA-F XX | . : CONNECTED CHEN TING 04-25-08 UBESCXBRDA-F _PADWG [7 yyy T g0004_ | ~@--==+ |pace: 5 | DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN [S CONSIDERED PROPRIETARY TO BEL FUSE INC, AND SHALL NOT BE RoHS COPIED, REPRODUCED OR DISCLOSED WITHOUT THE SUGGESTED PANEL UPENING d WRITTEN APPROVAL OF BEL FUSE INC. PRE] [MINARY 4,960 [113.82] METAL PANEL (J ZIZI LL LLLLLLLL LLL LLEDZEL EG L coe0 12.08 J 0 Sb / LIL LLL! L020 [eo.91J LOSO [e6.c9) el eee 5 er IT LUAS SL SLL LLL LL LD | At 2. CUM eC NOTES: PCB THE DISTANCE UF PANEL INSIDE SURFACE RELATIVE TU FRUNT SURFACE UF PART IS UNLY A SUGGESTION. IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL UPENING DIMENSIUNS CHANGE ACCURDINGLY. PACKING INFORMATION PACKING TRAY : 0200-9999-Be CIUPD U200-9999-B3 CBUT TUM) PACKING QUANTITY +| 10 PCS FINISHED GUUDS PER TRAY 7 TRAYS 70 PCS FINISHED GUUDSD) PER CARTUN BUX NOTE + CARDBUARDS ARE PLACED BETWEEN LAYERS UF PACKING TRAY INSIDE CARTUN BUX CINCLUDE THE UPPERMUST AND LUWERMUST TRAY) ORIGINATED BY DATE PART NO. / DRAWING NO. STANDARD DIM. ANTON LIAO 04-25-08 2X8 gigabit MagJack 08632X8RDA-F TOL. IN_INCH Del DRAWN BY DATE C8 Cores, Ext, Temp) FILE NAME <j [scaz: n/a [sme at components, _ _ _ _ _ CONNECTED CHEN TING 04-25-08 O863-C2X8R-DA-F O8632X%8RDA-F _PA.DWG xx | 20004 | @--}+ PAGE: 6 PLANET" DC002(2)032305 This document is electronically generated. This is a controlled copy if used internally