MASW-007588-000SMB - M/A-Com Technology Solutions

GaAs Broadband SPDT Switch

DC - 6.0 GHz

Rev. V1

MASW-007588

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 UNII, Hiperlan, and 802.11a+b/g Applications

 Broadband Performance: DC-6 GHz

 Low Insertion Loss: 0.9 dB at 6 GHz

 High Isolation: 28 dB Typical

 Fast Switching Speed: 0.5 µm GaAs PHEMT

 High Power: 36 dBm P1dB

 Fast Settling for Low Gate Lag Requirements

 Lead-Free 3 mm 12-lead PQFN Package

 100% Matte Tin Plating over Copper

 Halogen-Free “Green” Mold Compound

 RoHS* Compliant and 260°C Reflow Compatible

Description

M/A-COM’s MASW-007588 is a broadband GaAs

PHEMT MMIC SPDT switch in a low cost, lead-free

3 mm 12-lead PQFN package. The MASW-007588

is ideally suited for applications where very small

size and low cost are required.

The MASW-007588, with its small size and low

height, is ideal for 802.11a and 802.11b/g PC card

and access point applications.

The MASW-007588 delivers high isolation, low

insertion loss and high linearity up to 6 GHz.

The MASW-007588 is fabricated using a 0.5 micron

gate length GaAs PHEMT process. The process

features full passivation for performance and

reliability.

Ordering Information1

Part Number Package

MASW-007588-TR3000 3000 piece reel

MASW-007588-000SMB Sample Test Board

(Includes 5 Samples)

1. Reference Application Note M513 for reel size information.

PIN No. PIN Name Description

1 VC1 Control 1

2 RF1 RF Port 1

3 GND Ground

4 GND Ground

5 GND Ground

6 GND Ground

7 GND Ground

8 RF2 RF Port 2

9 VC2 Control 2

10 GND Ground

11 RFC RF Input

12 GND Ground

13 Paddle 2 RF and DC Ground

Pin Configuration

2. The exposed pad centered on the package bottom must be

connected to RF and DC ground.

Functional Schematic

Absolute Maximum Ratings 3,4

Parameter Absolute Maximum

Input Power @ 3 V Control +37 dBm

Input Power @ 5 V Control +39 dBm

Operating Voltage +8.5 volts

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

GND RFC GND

GND

GNDGNDGND

GND

VC2

RF2RF1

VC1

* Restrictions on Hazardous Substances, European Union Directive 002/95/EC.

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.

GaAs Broadband SPDT Switch

DC - 6.0 GHz

Rev. V1

MASW-007588

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Electrical Specifications5: TA = 25°C, Z0 = 50, Vc = 0 V/3 V, Pin = 0 dBm

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss

2.4 GHz

5.3 GHz

5.8 GHz

—

0.70

0.85

1.05

1.2

Isolation

2.4 GHz

5.3 GHz

5.8 GHz

—

Return Loss DC - 6 GHz dB — 20 —

IP2

Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz

2.4 GHz, Vc = 3.0 V

5.8 GHz, Vc = 3.0 V

2.4 GHz, Vc = 5.0 V

5.8 GHz, Vc = 5.0 V

dBm

—

107

—

IIP3

Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz

2.4 GHz, Vc = 3.0 V

5.8 GHz, Vc = 3.0 V

2.4 GHz, Vc = 5.0 V

5.8 GHz, Vc = 5.0 V

dBm

—

Input P-1dB

2.4 GHz

5.3 GHz

5.8 GHz

dBm

—

2nd Harmonic 2.4 GHz, Pin = +20 dBm

5.8 GHz, Pin = +20 dBm

dBm

—

-72

-69

—

3rd Harmonic 2.4 GHz, Pin = +20 dBm

5.8 GHz, Pin = +20 dBm

dBm

—

-85

-75

—

T-rise, T-fall 10% to 90% RF and 90% to 10% RF nS — 55 —

Ton, Toff 50% control to 90% RF, and 50% control to 10% RF nS — 80 —

Transients — mV — 14 —

Control Current |Vc| = 3 V µA — 15 25

Control

V2 RFC– RF1 RFC—RF2

1 0 On Off

0 1 Off On

Truth Table 5,6,7

5. For positive voltage control, external DC blocking capacitors

are required on all RF ports.

6. Differential voltage, V(state 1) - V(state 0), must be

+2.7 V minimum and must not exceed +5 V.

7. 0 = 0 ± 0.2 V, 1 = +2.9 V to +5 V.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

GaAs Broadband SPDT Switch

DC - 6.0 GHz

Rev. V1

MASW-007588

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves

Insertion Loss

Return Loss

Isolation

Application Schematic

GND RFC GND

GND

GNDGNDGND

GND

VC2

RF2RF1

VC1

C1 C2

C1, C2, C3 = 8 pF

0.4

0.6

0.8

1.0

1.2

1.4

1 2 3 4 5 6

+25°C

+85°C

-30°C

Frequency (GHz)

123456

+25°C

+85°C

-30°C

Frequency (GHz)

-40

-35

-30

-25

-20

-15

-10

-5

123456

+25°C

+85°C

-30°C

Frequency (GHz)

Lead-Free 3 mm 12-lead PQFN†

† Reference Application Note M538 for lead-free solder reflow recommendations.

GaAs Broadband SPDT Switch

DC - 6.0 GHz

Rev. V1

MASW-007588

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.