US
UK
Taiwan
China
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
Shielded Power Inductors
–
MSS6132
Document 641-1
Document 641-1 Revised 03/06/12
Designer’s Kit C364 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos
bronze (current production) or gold over nickel over phos bronze (prior
production). Other terminations available at additional cost.
Weight 0.33 – 0.38 g
Ambient temperature –40°C to +85°C with Irms current,
+85°C to +125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel, 1500/13″ reel; Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.1 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR SRF Isat (A)4 Irms (A)5
Inductance2 max typ3 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
MSS6132-472ML_ 4.7 0.043 65.0 2.18 2.60 2.84 2.30 3.10
MSS6132-562ML_ 5.6 0.048 60.0 2.10 2.50 2.74 2.20 2.95
MSS6132-682ML_ 6.8 0.052 47.0 1.80 2.12 2.30 2.10 2.80
MSS6132-822ML_ 8.2 0.055 45.0 1.78 2.06 2.22 2.00 2.65
MSS6132-103ML_ 10 0.070 39.0 1.36 1.64 1.84 1.90 2.50
MSS6132-123ML_ 12 0.079 33.0 1.30 1.54 1.70 1.75 2.35
MSS6132-153ML_ 15 0.106 27.0 1.16 1.42 1.56 1.65 2.20
MSS6132-183ML_ 18 0.118 24.0 1.04 1.22 1.36 1.55 2.05
MSS6132-223ML_ 22 0.158 21.0 0.97 1.12 1.22 1.45 1.90
MSS6132-273ML_ 27 0.180 19.0 0.91 1.08 1.18 1.30 1.75
MSS6132-333ML_ 33 0.250 18.0 0.81 0.96 1.10 1.20 1.60
MSS6132-393ML_ 39 0.275 17.0 0.79 0.92 0.99 1.10 1.45
MSS6132-473ML_ 47 0.300 16.0 0.72 0.86 0.93 0.95 1.30
MSS6132-563ML_ 56 0.380 14.0 0.61 0.72 0.79 0.85 1.15
MSS6132-683ML_ 68 0.410 12.0 0.55 0.63 0.69 0.73 1.00
MSS6132-823ML_ 82 0.510 10.0 0.53 0.62 0.67 0.60 0.85
MSS6132-104ML_ 100 0.660 9.0 0.45 0.54 0.59 0.50 0.69
• 6.1 × 6.1 mm footprint; 3.2 mm high shielded inductors
• Low DCR and excellent current handling
1. Please specify termination and packaging codes:
MSS6132-823MLC
Termination: L = RoHS compliant matte tin over
nickel over phos bronze (current
production) or gold over nickel over
phos bronze (prior production)
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) over gold over nickel
over phos bronze or
S = non-RoHS tin-lead (63/37) over
gold over nickel over phos bronze.
Packaging: C = 7″ machine-ready reel EIA-481
embossed plastic tape (500 per
full reel).
B = Less than full reel In tape, but
not machine-ready. To have a lead-
er and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 per
reel per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using
an Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current at which the inductance drops the speci-
fied amount from its value without current.
5. Current that causes the specified temperature rise
from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.