MECHANICAL DIMENSIONS
TEL 949-366-8700 FAX 949-366-8707 WEB http://www.caliberelectronics.com
1.60±0.127
(X2)
3.00 ±0.127
(X2)
5.08
MAX
5.08
MAX
1.20 ±0.50
(X4)
9.40
±0.127
1 4
2 3
13.20
MAX
2.000±0.127
(X4)
5.08
MAX
4.30
MAX
1.20 ±0.50
(X4)
9.40
±0.127
1 4
2 3
12.80
MAX
“D” Series
EQUIVALENT SERIES RESISTANCE (ESR) MARKING GUIDE
Frequency (MHz) ESR (ohms) Frequency (MHz) ESR (ohms)
3.579545 to 3.999 200 10.000 to 12.999 60
4.000 to 4.999 150 13.000 to 19.999 35
5.000 to 6.999 120 20.000 to 30.000 25
7.000 to 8.999 80 30.000 to 70.000 100
“DT” Series
All Dimensions in mm.
DT Series are marked “Frequency/Date Code”.
D Series are marked “Frequency/Date Code”.
All Dimensions in mm.
Frequency Range 3.579545MHz to 70.000MHz
Frequency Tolerance/Stability
A, B, C, D See above for details!
Other Combinations Available. Contact Factory for Custom Specifications.
Operating Temperature Range
“C” Option, “E” Option, “F” Option
0°C to 70°C, -20°C to 70°C (D Series Only), -40°C to 85°C (D Series Only)
Storage Temperatur e Range -55°C to 125°C
Load Capacitance
“S” Option
“XX” Option
Series
8pF to 50pF
Insulation Resistance 500 Megaohms Minimum at 100Vdc
Drive Level 1mW Maximum, 100uW corr elation
ELECTRICAL SPECIFICATIONS Revision: 1994-B
Aging @ 25°C ±5ppm / year Maximum
Shunt Capacitance 7pF Maximum
PART NUMBERING GUIDE Environmental/Mechanical Specifications on page F5
DT A 32 C 1 - 30.000MHz
Package
DT=4 Pad Plastic SMD Mode of Operation
D=4 Pad Plastic SMD (MG3A Equivalent) 1=Fundamental
Tolerance/Stability 3=Third Overtone
A=±50/100 Operating Temperature Range
B=±50/50 C=0°C to 70°C
C=±30/50 E=-20°C to 70°C
D=±30/30 F=-40°C to 85°C
Load Capacitance
S=Series, XX=XXpF (Pico Farads)
D, DT Series
4 Pin Plastic SMD Microprocessor Crystals CALIBER
Electronics Inc.
Lead-Free
RoHS Compliant
Line 1: Caliber
Line 2: Part Number
Line 3: Frequency
Line 4: Date Code
