EB51F2C30N-XX.XXXM - Ecliptek Corporation

MANUFACTURER CATEGORY

SERIES

PACKAGE

VOLTAGE

CLASS REV.DATE

EB51F2 Series

• Temperature Compensated

Crystal Oscillator (TCXO)

• HCMOS Output

• 5.0V Supply Voltage

• Stability to 1.5ppm

• External voltage

control option available

ECLIPTEK CORP. OSCILLATOR EB51F2 14-PIN DIP 5.0V OS1N 09/03

OSCILLATOR

EB51F2

H 8.3

L 20.3

W 13.0

NOTES

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

ELECTRICAL SPECIFICATIONS

800-ECLIPTEK www.ecliptek.com for latest revision 88 Specifications subject to change without notice.

Frequency Range

Operating Temperature Range

Storage Temperature Range

Supply Voltage (VDD)

Input Current

Frequency Stability

Aging (at 25°C)

Output Voltage Logic High (VOH)

Output Voltage Logic Low (VOL)

Rise Time / Fall Time

Duty Cycle

Load Drive Capability

Control Voltage Range

Control Voltage (External)

Frequency Deviation

Linearity

Input Impedance

Typical Phase Noise

< 20.000MHz, at Steady State at 25°C

> 20.000MHz, at Steady State at 25°C

vs. Initial Frequency Tolerance

vs. Operating Temperature Range

vs. Input Voltage (VDD ±5%)

vs. Load (±10%)

20% to 80% of Waveform

at 50% of Waveform

Referenced to FO at VC = 2.5VDC; VDD = 5.0VDC

at 10Hz Offset

at 100Hz Offset

at 1kHz Offset

at 10kHz Offset

at 100kHz Offset

1.544MHz to 44.736MHz

See Table 1

-55°C to 125°C

5.0VDC ±5%

15mA Maximum

30mA Maximum

±1ppm (at Nominal VDD and VC)

See Table 1

±0.3ppm Maximum

±0.2ppm Maximum

±1ppm / year Maximum

VDD - 0.5VDC Minimum

0.5VDC Maximum

6 nSeconds Maximum

50 ±5(%)

30pF HCMOS Load Maximum

0.0VDC to VDD

2.5VDC ±2.0VDC , Positive Transfer Characteristic

±7ppm Minimum, ±20ppm Maximum

±10% Maximum

10kOhms Typical

-60dBc/Hz

-90dBc/Hz

-125dBc/Hz

-135dBc/Hz

-140dBc/Hz

ECLIPTEK CORP. OSCILLATOR EB51F2 14 pin DIP 5.0V OS1N 09/03

MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE

PART NUMBERING GUIDE

Line 1: ECLIPTEK

Line 2: XX.XXX M

M=MHz

Frequency (5 Digits Maximum + Decimal)

Line 3: XX Y ZZ

Week of Year

Last Digit of Year

Ecliptek Manufacturing Identifier

Note: Pin 1 shall be designated with a dot

NOTES

MECHANICAL DIMENSIONS

ALL DIMENSIONS IN MILLIMETERS

MARKING SPECIFICATIONS

ENVIRONMENTAL/MECHANICAL SPECIFICATIONS

800-ECLIPTEK www.ecliptek.com for latest revision 89 Specifications subject to change without notice.

Characteristic Specification

Fine Leak Test MIL-STD-883, Method 1014, Condition A

Gross Leak Test MIL-STD-883, Method 1014, Condition C

Mechanical Shock MIL-STD-202, Method 213, Condition C

Vibration MIL-STD-883, Method 2007, Condition A

Lead Integrity MIL-STD-883, Method 2004

Solderability MIL-STD-883, Method 2002

Temperature Cycling MIL-STD-883, Method 1010

Resistance to Soldering Heat MIL-STD-883, Method 210

Resistance to Solvents MIL-STD-883, Method 215

EB51F2 A 15 V - 12.800M

OPERATING TEMP. RANGE

One Letter Code Per Table 1

FREQUENCY STABILITY

Two Digit Code Per Table 1

FREQUENCY

EXTERNAL TRIM

N=None (No Connection on Pin 1)

V=Voltage Control on Pin 1

Pin 1: Voltage Control or No Connect

Pin 7: Case Ground

Pin 8: Output

Pin 14: Supply Voltage