ScotchlokTM Terminals MU18-6R/FLAG thru MU14-10R/FLAG W Ring Tongue, Non Insulated, Butted Seam, Flag C L Data Sheet Wire Product Number Range (AWG) Stud Size W C L Thickness Barrel Length Barrel I.D. MU18-6R/FLAG 22-18 6 0.38 0.34 0.66 0.030 0.26 0.070 MU14-10R/FLAG 16-14 10 0.38 0.34 0.69 0.030 0.25 0.090 Installation Information WARNING LISTED 314R UNDERWRITERS LABORATORIES STANDARD NO. UL 486A 3M FILE NO. E23438 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0, 65 3M FILE NO. LR22190 UL Recognized and CSA Certified for use on stranded copper (AWG) wire only. Specifications Wire Size: Barrel Seam: Maximum Current: Terminal Material: Plating: Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. See Table Above Butted Same as Wire Brass Tin Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-450 (scissor style) hand tools. Barrel Crimp (Required) Engineering Specification Crimp-type terminals shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire, and have a flat tongue portion with a central opening for mounting around a screw or stud. The terminal line shall offer tongue variations in hole (stud) size (6, 8, 10) and configuration (ring, fork, block fork, flanged block fork, locking fork, etc..) and barrel variations in wire (AWG) range (22-18, 16-14, 12-10) and construction (non insulated brazed seam, vinyl insulated butted seam, nylon insulated with insulation grip, etc). The terminal line shall be marked with the wire range and a manufacturer's symbol.() The non-insulated butted seam ring tongue terminal shall be tin plated, annealed copper, with the tongue having a specified stud hole (6 and 10) and with a butted seam barrel having a beveled I.D. for ease of stranded wire entry and sized for a specified (AWG) wire range. Non-Insulated terminals shall be UL Listed and CSA Certified. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 http://www.3M.com/elpd Litho in USA. (c) 3M 2002 78-8125-9795-9-A