MC78LC00 Series Micropower Voltage Regulator 5 Low Quiescent Current of 1.1 mA Typical Excellent Line and Load Regulation Maximum Operating Voltage of 12 V Low Output Voltage Option High Accuracy Output Voltage of 2.5% Industrial Temperature Range of -40C to 85C Two Surface Mount Packages (SOT-89, 3 Pin, or SOT-23, 5 Pin) These are Pb-Free Devices Typical Applications 2 GND 1 Vin 2 Vout 3 1 SOT-89 H SUFFIX CASE 1213 TAB 1 * Battery Powered Instruments * Hand-Held Instruments * Camcorders and Cameras Vin TSOP-5 NTR SUFFIX CASE 483 5 N/C 4 N/C (Top View) GND 1 Vin 2 Vout 3 XXAYW G G * * * * * * * * MARKING DIAGRAMS AND PIN CONNECTIONS G Features http://onsemi.com XXX AYW G The MC78LC00 series of fixed output low dropout linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent current. The MC78LC00 series features an ultra-low quiescent current of 1.1 mA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, and resistors for setting output voltage. The MC78LC00 has been designed to be used with low cost ceramic capacitors and requires a minimum output capacitor of 0.1 mF. The device is housed in the micro-miniature Thin SOT23-5 surface mount package and SOT-89, 3 pin. Standard voltage versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.3, 4.0, and 5.0 V. Other voltages are available in 100 mV steps. Tab (Top View) (Tab is connected to Pin 2) 3 VO XXX= Specific Device Code A = Assembly Location Y = Year W = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 10 of this data sheet. Vref 1 GND This device contains 8 active transistors. Figure 1. Representative Block Diagram (c) Semiconductor Components Industries, LLC, 2009 January, 2009 - Rev. 10 1 Publication Order Number: MC78LC00/D MC78LC00 Series AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAA AAAAAA AAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA PIN FUNCTION DESCRIPTION Pin No. Pin Name 1 GND Description 2 Vin Positive power supply input voltage 3 Vout Regulated Output 4 N/C No Internal Connection 5 N/C No Internal Connection Power supply ground MAXIMUM RATINGS AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA Symbol Value Unit Input Voltage Rating Vin 12 V Output Voltage Vout -0.3 to Vin +0.3 V Power Dissipation and Thermal Characteristics Case 483-01 (Thin SOT23-5) NTR Suffix Power Dissipation @ TA = 85C Thermal Resistance, Junction-to-Ambient Case 1213 (SOT-89) H Suffix Power Dissipation @ TA = 25C Thermal Resistance, Junction-to-Ambient PD RqJA 140 280 mW C/W PD RqJA 900 111 mW C/W Operating Junction Temperature TJ +125 C Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -55 to +150 C Tsolder 10 sec AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA Lead Soldering Temperature @ 260C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. http://onsemi.com 2 MC78LC00 Series ELECTRICAL CHARACTERISTICS (Vin = Vout(nom.) + 1.0 V, Cin = 1.0 mF, Cout = 1.0 mF, TJ = 25C, unless otherwise noted.) (Note 5) NTR SUFFIX Symbol Characteristic Output Voltage (TA = 25C, Iout = 1.0 mA) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 4.0 V 5.0 V Vout Output Voltage (TA = -40C to 85C) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 4.0 V 5.0 V Vout Min Typ Max 1.455 1.746 2.425 2.646 2.744 2.94 3.234 3.9 4.90 1.5 1.8 2.5 2.7 2.8 3.0 3.3 4.0 5.0 1.545 1.854 2.575 2.754 2.856 3.06 3.366 4.1 5.10 1.455 1.746 2.425 2.619 2.716 2.910 3.201 3.9 4.90 1.5 1.8 2.5 2.7 2.8 3.0 3.3 4.0 5.0 1.545 1.854 2.575 2.781 2.884 3.09 3.399 4.1 5.10 Unit V V Line Regulation (Vin = VO(nom.) + 1.0 V to 12 V, Iout = 1.0 mA) Regline - 0.05 0.2 %/V Load Regulation (Iout = 1.0 mA to 10 mA) Regload - 40 60 mV Output Current (Note 6) 1.5 V, 1.8 V (Vin = 4.0 V) 2.5 V, 2.7 V, 2.8 V, 3.0 V (Vin = 5.0 V) 3.3 V (Vin = 6.0 V) 4.0 V (Vin = 7.0 V) 5.0 V (Vin = 8.0 V) Iout 35 50 50 80 80 50 80 80 80 100 - - - - - - - - - 35 30 30 30 70 60 53 38 Dropout Voltage (Iout = 1.0 mA, Measured at Vout -3.0%) 1.5 V 1.6 V-3.2 V 3.3 V-3.9 V 4.0 V-5.0 V Vin-Vout mA mV Quiescent Current (Iout = 1.0 mA to IO(nom.)) IQ - 1.1 3.6 mA Output Voltage Temperature Coefficient Tc - "100 - ppm/C Output Noise Voltage (f = 1.0 kHz to 100 kHz) Vn - 89 - mVrms 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL-STD-883, Method 3015 Machine Model Method 200 V 2. Latch up capability (85C) "100 mA 3. Maximum package power dissipation limits must be observed. TJ(max) * TA PD + RqJA 4. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible. 5. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. 6. Output Current is measured when Vout = VO1 - 3% where VO1 = Vout at Iout = 0 mA. http://onsemi.com 3 MC78LC00 Series ELECTRICAL CHARACTERISTICS (Vin = Vout(nom.) + 1.0 V, Cin = 1.0 mF, Cout = 1.0 mF, TJ = 25C, unless otherwise noted.) (Note 11) HT SUFFIX Symbol Characteristic Output Voltage 30HT1 Suffix (Vin = 5.0 V) 33HT1 Suffix (Vin = 5.0 V) 40HT1 Suffix (Vin = 6.0 V) 50HT1 Suffix (Vin = 7.0 V) Min Typ Max 2.950 3.218 3.900 4.875 3.0 3.3 4.0 5.0 3.075 3.382 4.100 5.125 - 0.05 0.2 - - - - 40 40 50 60 60 60 70 90 35 35 45 55 50 50 65 80 - - - - - - - - 40 35 25 25 60 53 38 38 - - - - 1.1 1.1 1.2 1.3 3.3 3.3 3.6 3.9 - 100 - Unit V AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAA AAAA AAAA AAAAA AAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAA AAAAAAAA AAAAAAAAA AAAAAAAAA AAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA Line Regulation Vin = [VO + 1.0] V to 10 V, IO = 1.0 mA Regline Load Regulation (IO = 1.0 to 10 mA) 30HT1 Suffix (Vin = 5.0 V) 33HT1 Suffix (Vin = 6.0 V) 40HT1 Suffix (Vin = 7.0 V) 50HT1 Suffix (Vin = 8.0 V) Regload Output Current (Note 12) 30HT1 Suffix (Vin = 5.0 V) 33HT1 Suffix (Vin = 6.0 V) 40HT1 Suffix (Vin = 7.0 V) 50HT1 Suffix (Vin = 8.0 V) IO Dropout Voltage 30HT1 Suffix (IO = 1.0 mA) 33HT1 Suffix (IO = 1.0 mA) 40HT1 Suffix (IO = 1.0 mA) 50HT1 Suffix (IO = 1.0 mA) Vin - VO Quiescent Current 30HT1 Suffix (Vin = 5.0 V) 33HT1 Suffix (Vin = 5.0 V) 40HT1 Suffix (Vin = 6.0 V) 50HT1 Suffix (Vin = 7.0 V) ICC Output Voltage Temperature Coefficient TC %/V mV mA mV mA ppm/C 7. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL-STD-883, Method 3015 Machine Model Method 200 V 8. Latch up capability (85C) "100 mA 9. Maximum package power dissipation limits must be observed. TJ(max) * TA PD + RqJA 10. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible. 11. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. 12. Output Current is measured when Vout = VO1 - 3% where VO1 = Vout at Iout = 0 mA. DEFINITIONS Load Regulation difference between the input current (measured through the LDO input pin) and the output current. The change in output voltage for a change in output current at a constant temperature. Line Regulation Dropout Voltage The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse technique such that the average chip temperature is not significantly affected. The input/output differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 3% below its nominal. The junction temperature, load current, and minimum input supply requirements affect the dropout level. Line Transient Response Typical over and undershoot response when input voltage is excited with a given slope. Maximum Power Dissipation The maximum total dissipation for which the regulator will operate within its specifications. Maximum Package Power Dissipation The maximum power package dissipation is the power dissipation level at which the junction temperature reaches its maximum operating value, i.e. 125C. Depending on the ambient power dissipation and thus the maximum available output current. Quiescent Current The quiescent current is the current which flows through the ground when the LDO operates without a load on its output: internal IC operation, bias, etc. When the LDO becomes loaded, this term is called the Ground current. It is actually the http://onsemi.com 4 MC78LC00 Series 3.2 3.2 VO, OUTPUT VOLTAGE (V) VO, OUTPUT VOLTAGE (V) 3.1 3 IO = 1 mA 2.9 IO = 10 mA 2.8 2.7 2.6 IO = 5 mA 2.5 2.4 2.2 2.5 2.7 2.9 3.1 3.3 2.4 MC78LC30HT1 IO = 10 mA 2.9 3.1 Vin, Input Voltage (V) Figure 2. Output Voltage versus Input Voltage Figure 3. Output Voltage versus Input Voltage 2.7 3.3 3.5 3.2 NTR Series VO, OUTPUT VOLTAGE (V) -40C 2.95 80C 2.9 2.85 2.8 2.75 25C 2.7 2.65 0 20 40 60 80 100 3.1 TA = -30C 3.0 2.9 TA = 25C 2.8 MC78LC30HT1 2.7 0 0 120 20 TA = 80C 100 120 IO, Output Current (mA) 40 60 80 IO, Output Current (mA) Figure 4. Output Voltage versus Output Current Figure 5. Output Voltage versus Output Current 2 2.0 Vin -VO, DROPOUT VOLTAGE (V) Vin -VO, DROPOUT VOLTAGE (V) IO = 5.0 mA 2.6 Vin, Input Voltage (V) 3 VO, OUTPUT VOLTAGE (V) 2.8 2.2 2.5 3.5 3.05 MC78LC30NTR TA = 25C 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 IO = 1.0 mA 3.0 TA = 25C 2.3 2.6 TA = 25C NTR Series 0 10 20 30 40 1.6 1.2 0.8 0 0 50 MC78LC30HT1 TA = 25C 0.4 IO, Output Current (mA) 10 20 30 40 50 IO, Output Current (mA) Figure 6. Dropout Voltage versus Output Current Figure 7. Dropout Voltage versus Output Current http://onsemi.com 5 MC78LC00 Series 3.10 MC78LC30NTR Vin = 4.0 V IO = 10 mA 3.06 VO, OUTPUT VOLTAGE (V) VO, OUTPUT VOLTAGE (V) 3.1 3.02 2.98 2.94 2.9 -40 -20 0 20 40 60 3.06 3.02 2.98 MC78LC30HT1 2.94 2.90 -40 80 -20 20 40 60 80 TA, Ambient Temperature (C) Figure 8. Output Voltage versus Temperature Figure 9. Output Voltage versus Temperature 1.4 1.3 IQ, QUIESCENT CURRENT (mA) MC78LC30NTR TA = 25C IO = 0 mA 1.2 1.1 1 0.9 0.8 3 4 5 6 7 8 9 10 11 TA = 25C 1.3 1.2 1.1 1.0 MC78LC30HT1 0.9 0.8 3.0 12 4.0 Vin, Input Voltage (V) 7.0 8.0 9.0 10 1.2 IQ, QUIESCENT CURRENT (mA) MC78LC30NTR Vin = 4.0 V IO = 0 mA 1.25 1 0.75 0.5 -20 6.0 Figure 11. Quiescent Current versus Input Voltage 1.75 1.5 5.0 Vin, Input Voltage (V) Figure 10. Quiescent Current versus Input Voltage IQ, QUIESCENT CURRENT (mA) 0 TA, Ambient Temperature (C) 1.4 IQ, QUIESCENT CURRENT (mA) Vin = 5.0 V IO = 10 mA 0 20 40 60 Vin = 5.0 V 1.1 1.0 0.9 0.8 MC78LC30HT1 0.7 0.6 -40 80 -20 0 20 40 60 80 TA, Ambient Temperature (C) TA, Ambient Temperature (C) Figure 12. Quiescent Current versus Temperature Figure 13. Quiescent Current versus Temperature http://onsemi.com 6 MC78LC00 Series 0.8 NTR Series 0.7 Vin - Vout, DROPOUT VOLTAGE (V) Vin - Vout, DROPOUT VOLTAGE (V) 0.8 HT1 Series 0.7 0.6 IO = 10 mA 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 IO = 1.0 mA 0.1 0.1 0 0.0 1.0 2.0 4.0 3.0 5.0 6.0 0 0 1.0 2.0 VO, Set Output Voltage (V) Output Voltage Deviation (mV) INPUT VOLTAGE/OUTPUT VOLTAGE (V) Input Voltage (V) 6.0 NTR Series 5.0 4.0 300 Vin = 4.5 V to 5.5 V Vout = 3.0 V RL = 3 k Cout = 0.1 mF 100 0 -100 -200 -300 0 0.5 1.0 1.5 2.0 2.5 6.0 8.0 7.5 Input Voltage 7.0 6.5 6.0 HT1 Series 5.5 Output Voltage 5.0 CO = 0.1 mF IO = 1.0 mA 4.5 4.0 0 2.0 4.0 6.0 t, Time (ms) Figure 16. Line Transient Figure 17. Line Transient Response 1.5 TA = 25C 3.0 NTR Series Ig GROUND CURRENT (mA) Vout, OUTPUT VOLTAGE (V) 5.0 Time (mS) 3.5 2.5 2.0 1.5 IO = 50 mA 1.0 100 mA 0.5 0 4.0 Figure 15. Dropout Voltage versus Set Output Voltage Figure 14. Dropout Voltage versus Set Output Voltage 200 3.0 VO, Set Output Voltage (V) TA = 25C IO = 0 mA 1.0 NTR Series 50 mA 0.8 200 mA 0.6 100 mA 50 mA 0.4 0.2 200 mA 200 mA 0 0.5 1.0 1.5 2.0 0 2.5 0 0.5 Vin, Input Voltage (V) 1.0 1.5 2.0 2.5 Vin, Input Voltage (V) Figure 18. Output Voltage versus Input Voltage Figure 19. Ground Current versus Input Voltage http://onsemi.com 7 MC78LC00 Series APPLICATIONS INFORMATION Thermal A typical application circuit for the MC78LC00 series is shown in Figure 20. As power across the MC78LC00 increases, it might become necessary to provide some thermal relief. The maximum power dissipation supported by the device is dependent upon board design and layout. Mounting pad configuration on the PCB, the board material, and also the ambient temperature effect the rate of temperature rise for the part. This is stating that when the MC78LC00 has good thermal conductivity through the PCB, the junction temperature will be relatively low with high power dissipation applications. The maximum dissipation the package can handle is given by: Input Decoupling (C1) A 0.1 mF capacitor either ceramic or tantalum is recommended and should be connected close to the MC78LC00 package. Higher values and lower ESR will improve the overall line transient response. Output Decoupling (C2) The MC78LC00 is a stable component and does not require any specific Equivalent Series Resistance (ESR) or a minimum output current. Capacitors exhibiting ESRs ranging from a few mW up to 3.0 W can thus safely be used. The minimum decoupling value is 0.1 mF and can be augmented to fulfill stringent load transient requirements. The regulator accepts ceramic chip capacitors as well as tantalum devices. Larger values improve noise rejection and load regulation transient response. PD + If junction temperature is not allowed above the maximum 125C, then the MC78LC00NTR can dissipate up to 357 mW @ 25C. The power dissipated by the MC78LC00NTR can be calculated from the following equation: Hints Please be sure the Vin and GND lines are sufficiently wide. When the impedance of these lines is high, there is a chance to pick up noise or cause the regulator to malfunction. Set external components, especially the output capacitor, as close as possible to the circuit, and make leads as short as possible. Battery or Unregulated Voltage TJ(max) * TA RqJA Ptot + Vin * Ignd (Iout) ) [Vin * Vout] * Iout or P ) Vout * Iout VinMAX + tot Ignd ) Iout If an 80 mA output current is needed then the ground current from the data sheet is 1.1 mA. For an MC78LC30NTR (3.0 V), the maximum input voltage will then be 7.4 V. + C1 Vout + C2 Figure 20. Basic Application Circuit for NTR Suffixes http://onsemi.com 8 MC78LC00 Series MJD32C 0.033 mF 2 100 Vin MC78LC00 3 VO MC78LC00 1 1 0.1 mF 2 Vin C1 0.1 mF 3 R1 ICC R2 Figure 21. Current Boost Circuit R2 Figure 22. Adjustable VO MJD32C Q1 Q2 Vin C2 GND GND GND VO 0.033 mF MMBT2907 ALT1 2 R1 MC78LC00 3 1 0.1 mF VO 0.1 mF GND GND Figure 23. Current Boost Circuit with Overcurrent Limit Circuit V O + V O(Reg) 1 ) R2 ) ICC R2 R1 I http://onsemi.com 9 O(short circuit) [ V BE2 ) R2 V BE1 ) V R1 BE2 MC78LC00 Series ORDERING INFORMATION Nominal Output Voltage Marking Package MC78LC15NTR 1.5 LAG Thin SOT23-5 MC78LC15NTRG 1.5 LAG Thin SOT23-5 (Pb-Free) MC78LC18NTR 1.8 LAH Thin SOT23-5 MC78LC18NTRG 1.8 LAH Thin SOT23-5 (Pb-Free) MC78LC25NTR 2.5 LAI Thin SOT23-5 MC78LC25NTRG 2.5 LAI Thin SOT23-5 (Pb-Free) MC78LC27NTR 2.7 LAJ Thin SOT23-5 MC78LC27NTRG 2.7 LAJ Thin SOT23-5 (Pb-Free) MC78LC28NTR 2.8 LAK Thin SOT23-5 MC78LC28NTRG 2.8 LAK Thin SOT23-5 (Pb-Free) MC78LC30NTR 3.0 LAL Thin SOT23-5 MC78LC30NTRG 3.0 LAL Thin SOT23-5 (Pb-Free) MC78LC33NTR 3.3 LAM Thin SOT23-5 MC78LC33NTRG 3.3 LAM Thin SOT23-5 (Pb-Free) MC78LC40NTR 4.0 LEC Thin SOT23-5 MC78LC40NTRG 4.0 LEC Thin SOT23-5 (Pb-Free) MC78LC50NTR 5.0 LAN Thin SOT23-5 MC78LC50NTRG 5.0 LAN Thin SOT23-5 (Pb-Free) MC78LC30HT1G 3.0 0C SOT-89 (Pb-Free) MC78LC33HT1G 3.3 3C SOT-89 (Pb-Free) MC78LC40HT1G 4.0 0D SOT-89 (Pb-Free) MC78LC50HT1G 5.0 0E SOT-89 (Pb-Free) Device Shipping 3000 Units/7 Tape & Reel 1000 Units Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Additional voltages in 100 mV steps are available upon request by contacting your ON Semiconductor representative. http://onsemi.com 10 MC78LC00 Series PACKAGE DIMENSIONS TSOP-5 (SOT23-5) NTR SUFFIX CASE 483-02 ISSUE H D 5X NOTE 5 2X 0.10 T 2X 0.20 T NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 5. OPTIONAL CONSTRUCTION: AN ADDITIONAL TRIMMED LEAD IS ALLOWED IN THIS LOCATION. TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2 FROM BODY. 0.20 C A B M 5 1 4 2 L 3 B S K DETAIL Z G A DIM A B C D G H J K L M S DETAIL Z J C 0.05 SEATING PLANE H T MILLIMETERS MIN MAX 3.00 BSC 1.50 BSC 0.90 1.10 0.25 0.50 0.95 BSC 0.01 0.10 0.10 0.26 0.20 0.60 1.25 1.55 0_ 10 _ 2.50 3.00 SOLDERING FOOTPRINT* 0.95 0.037 1.9 0.074 2.4 0.094 1.0 0.039 0.7 0.028 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 11 MC78LC00 Series PACKAGE DIMENSIONS SOT-89 H SUFFIX CASE 1213-02 ISSUE C -A- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. 1213-01 OBSOLETE, NEW STANDARD 1213-02. C J F -B- L K D 0.10 E G M T B S A S -T- SEATING PLANE 2 PL 0.10 M T B S A S DIM A B C D E F G H J K L MILLIMETERS MIN MAX 4.40 4.60 2.40 2.60 1.40 1.60 0.37 0.57 0.32 0.52 1.50 1.83 1.50 BSC 3.00 BSC 0.30 0.50 0.80 ----4.25 INCHES MIN MAX 0.173 0.181 0.094 0.102 0.055 0.063 0.015 0.022 0.013 0.020 0.059 0.072 0.059 BSC 0.118 BSC 0.012 0.020 0.031 ----0.167 H ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 12 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC78LC00/D