Coaxial High Isolation Switch 50 SPST, Absorptive Maximum Ratings Operating Temperature -55C to 100C Storage Temperature -55C to 150C RF Input Power see Table Control Current 500 A Typ. at Vc=-9 to -12V Permanent damage may occur if any of these limits are exceeded. Coaxial Connections RF IN RF OUT CONTROL 1 CONTROL 2 2 3 1 S DC to 2000 MHz Features * * * * wideband, DC to 2000 MHz low insertion loss, 1.3 dB typ. low video leakage 30 mVp-p typ. very fast switching Condition (MHz) Isolation (In to Out)2 VSWR - RF IN and RF OUT (ON STATE ) VSWR - RF IN (OFF STATE) VSWR - RF OUT (OFF STATE) Video Leakage3 Rise / Fall Time Switching Time - Turn On Switching Time - Turn Off Control Voltage (Vc) J --- K --- G H .125 1.000 3.18 25.40 L M N P .125 1.688 2.18 .75 3.18 42.88 55.37 19.05 Q wt .07 grams 1.78 75.0 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Electrical Specifications Parameter 1dB Compression1 E F .38 1.000 9.65 25.40 Qty. (1-9) (1+) +RoHS Compliant * PCN * cellular * antenna switching Outline Drawing A B C D 1.25 1.25 .75 .63 31.75 31.75 19.05 16.00 CASE STYLE: J17 Connectors Model Price SMA ZFSWHA-1-20+ $74.95 BRACKET (OPTION "B") $5.00 Applications Frequency Insertion Loss Outline Dimensions (inch mm ) ZFSWHA-1-20+ Control Current Max RF Input Power Steady State (not hot switching) Max RF Input Power Hot Switching (as modulator) DC to 100 MHz 100 to 1000 MHz 1000 to 2000 MHz DC to 100 MHz 100 to 1000 MHz 1000 to 2000 MHz DC to 100 MHz 100 to 1000 MHz 1000 to 2000 MHz DC to 200 MHz 200 to 2000 MHz DC to 200 MHz 200 to 2000 MHz DC to 200 MHz 200 to 2000 MHz 10 to 90% 50% Control to 90% RF 50% Control to 10% RF Low High 0 to -8V DC to 20 MHz 20 to 500 MHz 500 to 2000 MHz DC to 20 MHz 20 to 500 MHz 500 to 2000 MHz Min Typ. Max Units DC 60 58 58 - 0.8 1.3 1.3 19 19 26 75 65 65 30 3 7 2000 1.2 1.7 1.7 1.25 1.5 1.25 1.5 1.4 1.5 50 5 10 MHz dB - 3 10 -0.2 -8 - +23 +30 +33 +14.5 +20 +27 0 -5 200 - dBm dB :1 :1 :1 mV p-p nS nS nS V mA dBm dBm CAUTION - IMPORTANT: RF PORTS MUST BE DC BLOCKED or HELD to 0V DC 1. 1dB Compression is specified at Control Voltage (Vc)= -8V 2. Isolation is specified RF IN to RF OUT with Control Logic = Off 3. Video leakage or breakthrough is defined as leakage of switching control signal to RF output port Electrical Schematic CONTROL LOGIC Control Ports 1 2 -V 0 0 -V RF outputs Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits (R) www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com On Off REV. B M121747 ZFSWHA-1-20+ WP/CP/AM 130809 Page 1 of 2 ZFSWHA-1-20+ Typical Performance Data FREQ. (MHz) ON INSERTION LOSS (dB) (ctrl1 @ -8V, ctrl 2 @ 0V) IN-OUT 0.30 5.30 10.30 100.29 280.26 390.24 445.23 610.21 780.18 890.17 945.16 1000.15 1165.13 1335.10 1445.08 1500.08 1665.05 1835.03 1945.01 2000.00 IN OUT -- x -- x -- x 0.62 0.63 0.69 0.79 0.85 0.92 0.90 0.96 0.99 1.02 1.04 0.99 1.09 1.11 1.14 1.09 1.17 1.13 1.22 1.17 0.01 0.01 0.01 0.01 0.01 0.00 0.01 0.01 0.01 0.01 0.01 0.00 0.02 0.02 0.02 0.02 0.01 0.01 0.03 0.01 90.61 85.48 83.23 67.92 66.96 67.09 67.05 65.89 64.48 63.58 63.07 62.55 61.49 61.45 61.66 62.32 60.72 60.34 60.54 61.08 3.68 6.29 4.25 1.22 1.83 1.35 1.41 1.85 1.97 2.32 2.05 1.47 2.35 1.70 1.64 2.10 1.78 0.70 1.60 1.47 1.15 1.16 1.16 1.15 1.15 1.15 1.16 1.16 1.17 1.18 1.18 1.18 1.18 1.17 1.16 1.16 1.15 1.14 1.13 1.13 1.15 1.15 1.15 1.15 1.14 1.14 1.15 1.15 1.16 1.16 1.16 1.15 1.15 1.14 1.13 1.12 1.10 1.07 1.06 1.05 ZFSWHA-1-20+ INSERTION LOSS 100 1.6 1.2 0.8 0.4 at RF level of 10 dBm OFF -- x 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.12 1.13 1.14 1.17 1.20 1.22 1.23 ZFSWHA-1-20+ ISOLATION 90 80 70 60 50 0.0 0 1.5 VSWR ON -- x ISOLATION (dB) INSERTION LOSS (dB) 2.0 at RF level of 10 dBm OFF ISOLATION (dB) (ctrl 1 @ 0V, ctrl 2 @ -8V) IN-OUT 400 at RF level of 10 dBm INPUT 800 1200 FREQUENCY (MHz) 1600 2000 0 400 800 1200 FREQUENCY (MHz) 1600 2000 ZFSWHA-1-20+ VSWR OUT-ON OUT-OFF VSWR 1.4 1.3 1.2 1.1 1.0 0 400 800 1200 1600 2000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits (R) www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2