Product data sheet Characteristics XACB881 pendant control station XAC-B - 8 pushbuttons Range of product Harmony XAC Product or component type Pendant control station Control station name XACB Control station type Double insulated Enclosure material Glass reinforced polyester Electrical circuit type Control circuit Enclosure type Complete ready for use Control station application Control of single speed hoist motor Control station composition 8 pushbuttons Control button type Third pushbutton right, slow Sixth pushbutton reverse, slow Seventh pushbutton I Second pushbutton lower, slow Fourth pushbutton left, slow First pushbutton raise, slow Fifth pushbutton forward slow Eighth pusbutton O Contact block name XESB2011 for reversing operation Mechanical interlocking Without mechanical interlock Complementary Control station colour Yellow Connections - terminals Screw clamp terminals, connection capacity: 2 x 1.5 mm with or without cable end Screw clamp terminals, connection capacity: 1 x 2.5 mm with or without cable end Mechanical durability 1000000 cycles Cable entry Rubber sleeve with stepped entry, cable outer diameter: 10...22 mm Contact code designation Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current 10 A [Ui] rated insulation voltage 500 V (degree of pollution: 3) conforming to IEC 60947-1 [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-1 Contacts operation Snap action Resistance across terminals <= 25 MOhm Operating force 7 N for pushbutton Short circuit protection 10 A fuse protection by cartridge fuse type gG Rated operational power in VA 750 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 230 V 50/60 Hz, load factor = 0.5 (inductive load) 50 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V 50/60 Hz, load factor = 0.5 (inductive load) 450 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 127 V 50/60 Hz, load factor = 0.5 (inductive load) 100 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V 50/60 Hz, load factor = 0.5 (inductive load) Rated operational power in W 95 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 140 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 140 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C Terminals description ISO n1 (1-2-3-4)OC Nov 14, 2014 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Main Terminal identifier (11-12)NC (13-14)NO Product weight 1.55 kg Environment Standards EN/IEC 60204-32 EN/IEC 60947-5-1 UL 508 CSA C22.2 No 14 Product certifications CSA 300V type 4 Protective treatment TH Ambient air temperature for operation -25...70 C Ambient air temperature for storage -40...70 C Vibration resistance 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 Shock resistance 100 gn conforming to IEC 60068-2-27 Class of protection against electric shock Class II IP degree of protection IP65 conforming to IEC 60529 IK degree of protection IK08 conforming to EN 50102 2 XACB881 Product data sheet Dimensions Drawings Dimensions Below drawing shows a product with 6 cut-outs. Select the number of cut-outs according to the product characteristics in order to get b, b1 and c dimensions. (1) With mushroom head operator Dimensions in mm Number of cut-outs 2 4 6 8 12 b 409 499 589 679 679 b1 220 310 400 490 490 c 98 98 98 98 98 d 40 40 40 40 30 Dimensions in in. Number of cut-outs 2 4 6 8 12 b 16.10 19.64 23.19 26.73 26.73 b1 8.66 12.20 15.75 19.29 19.29 c 3.86 3.86 3.86 3.86 3.86 d 1.57 1.57 1.57 1.57 1.18 Protective cable sleeves (1) Internal o 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schneider Electric: XACB881