XACB881 - Schneider Electric

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Nov 14, 2014

Product data sheet

Characteristics

XACB881

pendant control station XAC-B - 8 pushbuttons

Main

Range of product Harmony XAC

Product or component

type

Pendant control station

Control station name XACB

Control station type Double insulated

Enclosure material Glass reinforced polyester

Electrical circuit type Control circuit

Enclosure type Complete ready for use

Control station applica-

tion

Control of single speed hoist motor

Control station compo-

sition

8 pushbuttons

Control button type Third pushbutton right, slow

Sixth pushbutton reverse, slow

Seventh pushbutton I

Second pushbutton lower, slow

Fourth pushbutton left, slow

First pushbutton raise, slow

Fifth pushbutton forward slow

Eighth pusbutton O

Contact block name XESB2011 for reversing operation

Mechanical interlocking Without mechanical interlock

Complementary

Control station colour Yellow

Connections - terminals Screw clamp terminals, connection capacity: 2 x 1.5 mm² with or without cable

end

Screw clamp terminals, connection capacity: 1 x 2.5 mm² with or without cable

end

Mechanical durability 1000000 cycles

Cable entry Rubber sleeve with stepped entry, cable outer diameter: 10...22 mm

Contact code designation Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A

A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A

[Ithe] conventional enclosed thermal current 10 A

[Ui] rated insulation voltage 500 V (degree of pollution: 3) conforming to IEC 60947-1

[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-1

Contacts operation Snap action

Resistance across terminals <= 25 MOhm

Operating force 7 N for pushbutton

Short circuit protection 10 A fuse protection by cartridge fuse type gG

Rated operational power in VA 750 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 230 V 50/60 Hz,

load factor = 0.5 (inductive load)

50 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V 50/60 Hz,

load factor = 0.5 (inductive load)

450 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 127 V 50/60 Hz,

load factor = 0.5 (inductive load)

100 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V 50/60 Hz,

load factor = 0.5 (inductive load)

Rated operational power in W 95 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 120 V, load factor

= 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C

140 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V, load factor

= 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C

140 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V, load factor

= 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C

Terminals description ISO n°1 (1-2-3-4)OC