Infrared detector modules with preamp Thermoelectrically cooled type Easy-to-use detector modules with built-in preamps Infrared detector modules operate just by connecting to DC power supplies. The detector element is selectable from among InGaAs, PbS, PbSe, and InSb, which are all combined with a thermoelectric cooler. We welcome requests for custom devices that suit your application. Features Applications High S/N Infrared detection Compact size Accessories Easy to use Operates just by connecting to DC power supply Circuit design optimized for detector characteristics Cable (for DC power supply) A4372-02: 2 m (connector installed at one end) Built-in thermoelectric cooling control circuit (fixed control temperature) Instruction manual Structure / Absolute maximum ratings Type no. Detector element Window material Photosensitive area (mm) G6122 G6122-03 G6126 P4638 P4639 P4631-03 InGaAs (G12182-210K) Borosilicate glass InGaAs (G12183-210K) AR coated InGaAs (G8605-25) (1.55 m peak) Borosilicate glass PbS (P2682-01) PbSe (P9696-203) Sapphire glass InSb (P6606-310) Supply voltage Vcc (V) Vp (V) +2.5+1 -0.05 0.2 +4.5 0.25 0.25 100 67 1 1 5 4x5 3x3 1x1 15 0.5 Absolute maximum ratings Supply Operating Storage voltage temperature temperature Topr Tstg Vcc Vp (V) (V) (C) (C) Incident light level max. (W) 0.06 0.07 18 +5 0 to +40 -20 to +50 +7 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. www.hamamatsu.com 1 Infrared detector modules with preamp Thermoelectrically cooled type Electrical and optical characteristics (Typ. Ta=25 C, unless otherwise noted) Element temperPeak ature sensitivity at rated wavelength Type no. input p voltage Td (C) (m) 1.95 G6122 G6122-03 2.3 G6126 1.55 -15 P4638 2.4 P4639 4.1 P4631-03 -58 5.5 Cutoff wavelength c (m) 2.05 2.56 1.66 3.1 5.0 6.1 Photosensitivity S =p *1 Min. (V/W) 1.1 x 108 1.0 x 108 3.3 x 107 4.0 x 107 1.3 x 105 1.2 x 105 Noise equivalent power NEP =p Typ. (V/W) 1.7 x 108 1.5 x 108 5.0 x 107 8.0 x 107 2.0 x 105 1.5 x 105 Typ. (W/Hz1/2) 1 x 10-12 6 x 10-13 7 x 10-14 1 x 10-12 1 x 10-10 1.5 x 10-11 Max. (W/Hz1/2) 3 x 10-12 6 x 10-12 7 x 10-13 2 x 10-12 2 x 10-10 6 x 10-11 Frequency response -3 dB Maximum Output output impevoltage dance RL=1 k (Hz) FcL FcH Typ. Max. Min. Typ. () DC - 1.5 k 2.2 k DC - 2.1 k 3 k DC - 900 1.2 k 50 0.2 0.4 150 300 0.2 0.4 8 k 10 k DC - 80 k 100 k (V) +10 13 +10 Current consumption*2 Vp Typ. Max. (mA) (mA) Vcc Typ. (mA) +30, -10 +30, -10 +500 +1100 +35, -15 +25, -15 +25, -15 +950 +75, -20 Max. (mA) +60, -30 +60, -30 +50, -30 +50, -20 +50, -20 +90, -30 *1: f=100 Hz (G6122, G6122-03, G6126, P4638), f=600 Hz (P4639), f=1.2 kHz (P4631-03) *2: Vcc=15 V, Vp=2.5 V (except for P4631-03), 4.5 V (P4631-03) Recommended DC power supply (analog power supply): E3630A (Agilent Technologies) Current capacity: More than 1.5 times the maximum current consumption Ripple noise: 5 mVp-p or less (15 V power supply) 5 mVp-p or less (+2.5 V, +4.5 V power supply) Spectral response (Typ.) 1013 D* (, 1200, 1) (cm * Hz1/2/W) G6126 G6122 12 10 P4638* 11 10 P4631-03 G6122-03 1010 109 P4639* 108 1 2 * (, 600, 1) 3 4 5 6 7 Wavelength (m) KIRDB0188EH 2 Infrared detector modules with preamp Thermoelectrically cooled type Dimensional outlines (unit: mm) G6122/-03, G6126, P4638, P4639 26 0.3 20 45 Photosensitive area 3.3 0.2 Photosensitive surface 75.2 26 0.3 40 (4 x) M3 Depth 5 (threaded hole) Cooling fin (front side) 27.2 46.3 0.3 2 75.2 0.7 0.4 26.5 12 20 0.3 20 0.3 BNC connector (signal output) 6-pin connector (voltage input) Tolerance unless otherwise noted: 1 KIRDA0009EG P4631-03 4.6 0.5 20 Photosensitive surface 3 45 34 0.3 8 Photosensitive area 7 31 0.3 66.5 7 45 66 0.2 0.4 132.5 64.5 2 62 0.3 Cooling fin (front side) (4 x) M3 Depth 5 (threaded hole) 26.5 12 20 0.3 20 0.3 BNC connector (signal output) 6-pin connector (voltage input) Offset adjustment screw Tolerance unless otherwise noted: 1 KIRDA0137EE Note: The cooling fin (front side) is removable. 3 Infrared detector modules with preamp Thermoelectrically cooled type Cable (for DC power supply) A4372-03 2000 100 90 10 27 11 4.8 1 10 3 Shielded wire (6 conductors) Connector: HR10-7P-6P (made by Hirose Electric) Solder processing Pin no. Pin connection Lead color +2.5 V (or +4.5 V) Red Power supply for cooling controller GND Blue Power supply for cooling controller Output for temperatures monitor Light green +15 V Yellow -15 V White GND Black stranded wire Tolerance unless otherwise noted: 1 KIRDA0197EC 4 Infrared detector modules with preamp Thermoelectrically cooled type Precautions * Always use a dual-polarity (15 V) power supply to operate this detector. Never use a single-polarity (+15 V or -15 V only) power supply. Using a single-polarity power supply may cause the amplifier in the detector module to break down. * Always supply +2.5 V or +4.5 V to cool the detector element. * Be careful not to apply excessive force to the detector surface. Applying excessive force may damage the light input window. Do not directly touch the light input window with bare hands. If dust or dirt gets on the window, wipe it gently using ethyl alcohol. * Do not drop this product or do not apply excessive shock to it. Related information http://www.hamamatsu.com/sp/ssd/doc_en.html Precautions Notice Technical information infrared detectors/technical information The G6122, G6122-03, G6126 and P4638 conform to European EMC directives: EN 61326-01 Class B. Information described in this material is current as of September, 2013. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KIRD1036E17 Sep. 2013 DN 5