MPMT10014001AT1 - Vishay - Datasheet.Live

MPM (Divider)

www.vishay.com Vishay Dale Thin Film

Revision: 12-Jul-13 1Document Number: 60001

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network

Vishay Dale Thin Film MPM Series Dividers provide

± 2 ppm/°C tracking and a ratio tolerance as tight as 0.01 %,

small size, and exceptional stability for all surface mount

applications. The standard SOT-23 package format with

unity and common standard resistance divider ratios

provide easy selection for most applications requiring

matched pair resistor elements. The ratios listed are

available for off the shelf delivery. If you require a

non-standard ratio, consult the applications engineering

group as we may be able to meet your requirements.

SCHEMATIC

FEATURES

• Excellent long term ratio stability

(R ± 0.015 %, 2000 h, + 70 °C)

• Ratio tolerances to ± 0.01 %

• Low TCR tracking ± 2 ppm

• Standard JEDEC TO-236 package variation AB

• Material categorization:

For definitions of compliance please see

www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and/or parts that are non-RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information/tables in this datasheet for details.

TYPICAL PERFORMANCE

R1R2

ABSOLUTE TRACKING

TCR 25 2

ABSOLUTE RATIO

TOL. 0.1 0.05

STANDARD DIVIDER RATIO (R2/R1)

RATIO R2 ()R

1 ()

100:1 100K 1K

50:1 50K 1K

25:1 25K 1K

20:1 20K 1K

10:1 10K 1K

9:1 9K 1K

6:1 6K 1K

5:1 10K 2K

5:1 5K 1K

4:1 8K 2K

4:1 4K 1K

2:1 10K 5K

2:1 2K 1K

1:1 50K 50K

1:1 25K 25K

1:1 10K 10K

1:1 5K 5K

1:1 2.5K 2.5K

1:1 1K 1K

1:1 500 500

1:1 250 250

Available

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome -

Pin/Lead Number 3-

Resistance Range 250  to 100 k per resistor -

TCR: Absolute ± 25 ppm/°C - 55 °C to + 125 °C

TCR: Tracking ± 2 ppm/°C (typical) - 55 °C to + 125 °C

Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 °C

Tolerance: Ratio ± 0.01 % to 0.5 % + 25 °C

Power Rating: Resistor 100 mW Maximum at + 70 °C

Power Rating: Package 200 mW Maximum at + 70 °C

Stability: Absolute R ± 0.05 % 2000 h at + 70 °C

Stability: Ratio R ± 0.015 % 2000 h at + 70 °C

Voltage Coefficient 0.1 ppm/V -

Working Voltage 100 V max. not to exceed -

Operating Temperature Range - 55 °C to + 125 °C -

Storage Temperature Range - 55 °C to + 150 °C -

Noise < - 30 dB -

Thermal EMF 0.2 μV/°C -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C

Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C

P x R

MPM (Divider)

www.vishay.com Vishay Dale Thin Film

Revision: 12-Jul-13 2Document Number: 60001

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Tol. available 1K and up equal values only

(2) Preferred packaging code

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION INCHES MILLIMETERS

MIN. MAX. MIN. MAX.

A 0.031 0.040 0.79 1.02

A1 0.001 0.004 0.02 0.10

B 0.105 0.120 2.67 3.05

S 0.071 0.079 1.80 2.00

W 0.015 0.021 0.38 0.54

L 0.083 0.098 2.10 2.50

H 0.047 0.055 1.20 1.40

T 0.005 0.010 0.13 0.25

J 0.0035 0.0059 0.089 0.15

K 0.017 0.022 0.44 0.55

Ø08°08°

Pin #

MECHANICAL SPECIFICATIONS

Resistive Element Passivated nichrome

Substrate Material Silicon

Body Molded epoxy

Terminals Copper alloy

Lead (Pb)-free Option 100 % matte tin

Tin Lead Option Sn85

Tin Lead and Lead (Pb)-free Finish Plated

DERATING CURVE

Ambient Temperature °C

0 70 125 150

100

Percent of Rated Power

100 % = 0.2 W

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MPM1003AWS

GLOBAL MODEL

(3 or 4 digits)

RESISTANCE

(4 or 8 digits)

TOLERANCE AND

RATIO TOLERANCE PACKAGING

MPM

(Tin lead)

MPMT

(Lead (Pb)-free)

(e3)

First 3 digits are significant

figures and the last digit

specifies the number of zeros

to follow. When like values are

required use total resistance.

When dual values are required

list both values.

Example:

(List R1 first in part number

with dual values)

1002 = 10K (5K/5K)

1003 = 100K (50K/50K)

10011002 = 1K/10K divider

Abs. Tol.



A = 0.1 %

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1 %

Z = 0.1 % (1)

Q = 0.05 % (1)

Ratio



0.05 %

0.1 %

0.5 %

0.025 %

0.01 %

BS = BULK 100 min., 1 mult

WS = WAFFLE 100 min., 1 mult

TAPE AND REEL

T0 = 100 min., 100 mult

T1 = 1000 min., 1000 mult (2)

T3 = 300 min., 300 mult

T5 = 500 min., 500 mult

TF = Full reel 4000

TS = 100 min., 1 mult

Historical Part Number example: MPM1002BW (for reference purposes only)

MPM 1002 B W

SERIES RESISTANCE TOLERANCE AND

RATIO TOLERANCE PACKAGING

PMT10015M001AT1

PM 1003MAWS

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

MPMT1001AW MPMT1001AT1 MPMT1002AT5 MPMT2002DT5 MPMT2002AT5 MPMT1003AT5

MPM1001/1003AT1 MPMT10012002AWS MPMT1002BTS MPMT50011002BT5 MPMT20011002BT1

MPMT10011003FT0 MPMT50011002AWS MPMT20011001ATF MPMT50011002FWS MPMT10011003AWS

MPMT10011002DTS MPMT5000AT1 MPMT50027502DBS MPMT50011002DWS MPMT10011002AWS

MPMT1001/1002A MPM1002AT1 MPM1003AT1 MPM20011002AT1 MPM2001AT1 MPM2002AT1 MPM5001AT1

MPMT50011002BT1 MPMT50011002DT1 MPMT5002BT1 MPMT2002FT1 MPMT10011002AT1

MPMT10014001AT1 MPMT10019001AT1 MPMT1002AT1 MPMT1003AT1 MPMT20011002AT1

MPMT20018001AT5 MPMT2001AT1 MPMT2002AT1 MPMT5001AT1 MPMT5002AT1 MPMT20018001DT0

MPM10034003BTS MPM1001AT5 MPM2002AT5 MPM1001/1003AT5 MPM5000FT5 MPM2002/6002AT5

MPM1001/9001AT5 MPM5002BT5 MPM1001/9001AWS MPM2001/8001BT5 MPM5002DT5 MPM50011002BT5

MPM2002FT5 MPMT10015002CWS MPM2002CT5 MPM5001AWS MPM5001DT5 MPM5001/1002DT5

MPM1001AWS MPM50011002BWS MPM1001/1003AWS MPM2001BWS MPM1002AT5 MPM2002AWS

MPM1001/4001AWS MPM1001BWS MPM2001AWS MPM5001AT5 MPM2001/8001AT5 MPM1003AT5

MPMT5001/1002DT5 MPM1003AWS MPM2001AT5 MPMT20011002AWS MPM1002QT5 MPM1001/9001BWS

MPM1001/5002CWS MPM5002AWS MPM2001/8001DT5 MPM2001/1002AT5 MPM5002AT5 MPM1001BT5

MPM1002/7002AT5 MPM5001/1002AWS MPMT2001AT5 MPM5002AT1 MPM10019001AT1 MPMT50011002AT5

MPM10014001ATS MPM1001BTS MPM10027002AWS MPM1002QT1 MPM20018001DT3 MPM2002CT1

MPM2002FT1 MPM50011002BT1