HDSP Series 14.2 mm (0.56 inch) Seven Segment Displays Data Sheet HDSP-K40x, HDSP-550x, HDSP-552x, HDSP-560x, HDSP-562x, HDSP-570x, HDSP-572x, HDSP-H15x, HDSP-H40x Series Description Features The 14.2 mm (0.56 inch) LED seven segment displays are designed for viewing distances up to 7 metres (23 feet). These devices use an industry standard size package and pinout. Both the numeric and 1 overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. x Industry Standard Size x Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers x Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green, Orange x Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast 50 Viewing Angle x Design Flexibility Common Anode or Common Cathode Single and Dual Digits Right Hand Decimal Point 1. Overflow Character x Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display x High Light Output x High Peak Current x Excellent for Long Digit String Multiplexing x Intensity and Color Selection Option See Intensity and Color Selected Displays Data Sheet x Sunlight Viewable AlGaAs These displays are ideal for most applications. Pin for pin IFAVG DATA SHEET = 10 mA KPeak = 1.3 IV DATA SHEET = 2800 Pcd Therefore IvAVG = (10 mA/10 mA) (1.3)(2800 Pcd) = 3640 Pcd Devices Orange HDSP- AlGaAs Red HDSP-[1] HER HDSP-[1] Yellow HDSP- Green HDSP- Description Package Drawing H401 H151 5501 5701 5601 Common Anode Right Hand Decimal A H403 H153 5503 5703 5603 Common Cathode Right Hand Decimal B H157 5507 5707 5607 Common Anode 1. Overflow C H158 5508 5708 5608 Common Cathode 1. Overflow D K401 5521 5721 5621 Two Digit Common Anode Right Hand Decimal E K403 5523 5723 5623 Two Digit Common Cathode Right Hand Decimal F Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation. Contrast Enhancement Mechanical The objective of contrast enhancement is to provide good display readability in the end use ambient light. The concept is to employ both luminance and chrominance contrast techniques to enhance the readability. This is accomplished by having the OFF dots blend into the display background and the ON dots stand out vividly against this same background. Therefore, these display devices are assembled with a gray package and matching encapsulating epoxy in the dots. Specially developed plastics are used to optimize the displays optical performance. These plastics restrict the solvents that may be used for cleaning. Only mixtures of Freon (F113) and alcohol should be used for vapor cleaning processes. Total immersion time in the vapors is two minutes. Some suggested mixtures are Freon TE, Arklone A or K, or Genesolv DI-15 or DE-15. A 60C (140F) water cleaning process may also be used. This process includes a neutralizer rinse (3% ammonia solution or equivalent), a surfactant rinse (1% detergent solution or equivalent), a water rinse, and a thorough air dry. Room temperature cleaning may be done with Freon T-E35 or T-P35, Ethanol, Isopropanol, or water with a mild detergent. Contrast enhancement may be achieved by using one of the following suggested filters: Standard Red and AlGaAs Red (HDSP-5300/H150) Panelgraphic RUBY RED 60 SGL-Homalite H100-1605 RED 3M Louvered Filter R6610 RED or N0210 GRAY HER (HDSP-5500) Panelgraphic SCARLET RED 60 SGL-Homalite H100-1670 RED or H100-1250 GRAY 3M Louvered Filter R6610 RED or N0210 GRAY Yellow (HDSP-5700) Panelgraphic YELLOW 27 or GRAY 10 SGL-Homalite H100-1720 AMBER or H100-1250 GRAY 3M Louvered Filter A5910 AMBER or N0210 GRAY Green (HDSP-5600) Panelgraphic GREEN 48 SGL-Homalite H100-1440 GREEN or H100-1250 GRAY 3M Louvered Filter YG6610 RED or N0210 GRAY For further information on contrast enhancement please see Application Note 1015. 2 Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal for portable applications. For additional information see the Low Current Seven Segment Displays data sheet. Part Numbering System 5082 -X XX X-X X X XX HDSP-X XX X-X X X XX Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 Package Dimensions PIN 1 2 3 A CATHODE e CATHODE d ANODE[3] 4 5 6 7 8 CATHODE c CATHODE DP CATHODE b CATHODE a ANODE[3] 9 10 CATHODE f CATHODE g B ANODE e ANODE d C CATHODE c ANODE c, d FUNCTION D ANODE c CATHODE c, d E E CATHODE NO. 1 D CATHODE NO. 1 F E ANODE NO. 1 D ANODE NO. 1 CATHODE[4] ANODE c ANODE DP ANODE b ANODE a CATHODE b ANODE a, b, DP CATHOPDE DP CATHODE a ANODE a, b, DP ANODE b CATHODE a, b, DP ANODE DE ANODE a CATHODE a, b, DP C CATHODE NO. 1 DP CATHODE NO. 1 E CATHODE NO. 2 D CATHODE NO. 2 G CATHODE NO. 2 C ANODE NO. 1 DP ANODE NO. 1 E ANODE NO. 2 D ANODE NO. 2 G ANODE NO. 2 CATHODE[4] ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 2 ANODE f ANODE g CATHODE d NO PIN ANODE d NO PIN DP CATHODE NO. 2 B CATHODE NO. 2 DP ANODE NO. 2 B ANODE NO. 2 11 12 A CATHODE NO. 2 F CATHODE NO. 2 A ANODE NO. 2 F ANODE NO. 2 13 14 15 16 17 18 DIGIT NO. 2 ANODE DIGIT NO. 1 ANODE B CATHODE NO. 1 A CATHODE NO. 1 G CATHODE NO. 1 F CATHODE NO. 1 DIGIT NO. 2 CATHODE DIGIT NO. 1 CATHODE B ANODE NO. 1 A ANODE NO. 1 G ANODE NO. 1 F ANODE NO. 1 NOTES: 1. ALL DIMENSIONS IN MILLIMETRES (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 3. REDUNDANT ANODES. 4. REDUNDANT CATHODES. 5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY. 4 Internal Circuit Diagram Absolute Maximum Ratings AlGaAs Red HDSP-H150 Series HER/Orange HDSP-5500 HDSP-H40x HDSP-K40x Series Yellow HDSP-5700 Series Green HDSP-5600 Series Units 96 105 80 105 mW Peak Forward Current per Segment or DP 160[1] 90[3] 60[5] 90[7] mA DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 3018] mA Description Average Power per Segment or DP Operating Temperature Range Storage Temperature Range -40 to +100 C -55 to +100 C Reverse Voltage per Segment or DP 3.0 V Wavesoldering Temperature for 3 Seconds (1.60 mm [0.063 in.] below body) 250 C Notes: 1. See Figure 2 to establish pulsed conditions. 2. Derate above 46C at 0.54 mA/C. 3. See Figure 7 to establish pulsed conditions. 4. Derate above 53C at 0.45 mA/C. 5. See Figure 8 to establish pulsed conditions. 6. Derate above 81C at 0.52 mA/C. 5 -20 to +100[9] 7. See Figure 9 to establish pulsed conditions. 8. Derate above 39C at 0.37 mA/C. 9. For operation below -20C, contact your local Avago components sales office or an authorized distributor. Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series HDSP- Parameter Symbol Min. Typ. [1,2,5] Luminous Intensity/Segment (Digit Average) IV 9.1 16.0 Forward Voltage/Segment or DP VF Max. Units Test Conditions mcd IF = 20 mA 1.8 IF = 20 mA V 2.0 3.0 IF = 100 mA H15X Peak Wavelength [3] Dominant Wavelength [4] Reverse Voltage/Segment or DP OPEAK 645 nm Od 637 nm 15 V VR 3.0 Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-Pin 400 C/W/ Seg IR = 100 A High Efficiency Red Device Series HDSP- Parameter Symbol Typ. 900 2800 Max. Units IV Forward Voltage/Segment or DP VF 2.1 OPEAK 635 nm Od 626 nm 30 V Peak Wavelength [3] Dominant Wavelength [4] Reverse Voltage/Segment or DP cd 3700 VR Test Conditions IF = 10 mA Luminous Intensity/Segment[1,2,6] (Digit Average) 55XX 6 Min. 3.0 IF = 60 mA Peak: 1 of 6 df 2.5 V Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-Pin 345 C/W/ Seg IF = 20 mA IR = 100 A Yellow Device Series HDSP- Parameter Symbol Min. Typ. 600 1800 Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 OPEAK 583 Max. Units IF = 10 mA cd 2750 57XX Peak Wavelength [3,7] Dominant Wavelength [4] Reverse Voltage/Segment or DP Test Conditions IF = 60 mA Peak: 1 of 6 df 2.5 V IF = 20 mA nm Od 581.5 586 VR 3.0 40 V 592.5 nm Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-Pin 345 C/W/ Seg IR = 100 A Orange Device Series HDSP- Parameter Min. Typ. Max. Units Test Conditions mcd IF = 10 mA V IF = 20 mA Luminous Intensity/Segment (Segment Average)[1,2] IV 2.37 Forward Voltage/Segment or DP VF 2.1 OPEAK 600 nm 603 nm IF = 10 mA 30 V IR = 100 A Peak Wavelength 7 Symbol H40x Dominant Wavelength[3] Od K40x Reverse Voltage/Segment or DP[4] VR 3.0 2.5 Temperature Coefficient of VF /Segment or DP VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-Pin 345 C/W/ Seg High Performance Green Device Series HDSP- Parameter Symbol Min. Typ. 900 2500 Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 OPEAK 566 Od 571 Max. Units IF = 10 mA cd 3100 56XX Peak Wavelength [3,7] Dominant Wavelength [4] Reverse Voltage/Segment or DP VR Test Conditions 3.0 IF = 60 mA Peak: 1 of 6 df 2.5 V IF = 10 mA nm 577 nm 50 V Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-Pin 345 C/W/ Seg IR = 100 A Notes: 1. Device case temperature is 25C prior to the intensity measurement. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, Od, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series. 6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series. 7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. AlGaAs Red Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration - Red. 8 Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration - AlGaAs Red. 40 IF - FORWARD CURRENT PER SEGMENT - mA 45 RJ-A = 770 C/W AlGaAs RED 35 30 25 20 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 140 120 AlGaAs RED 100 80 60 40 20 0 0 1.75 1.50 1.25 1.00 AlGaAs RED 0.50 0.25 0 0 5 10 15 20 25 30 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Figure 4. Forward Current vs. Forward Voltage. PEAK - NORMALIZED RELATIVE EFFICIENCY 2.00 0.75 0.5 VF - FORWARD VOLTAGE - V Figure 3. Maximum Allowable DC Current vs. Ambient Temperature. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 160 TA - AMBIENT TEMPERATURE - C 35 40 IF - FORWARD CURRENT PER SEGMENT - mA Figure 5. Relative Luminous Intensity vs. DC Forward Current. IDC MAX. - MAXIMUM DC CURRENT PER SEGMENT - mA 50 1.4 1.2 1.0 AlGaAs RED 0.8 0.6 0.5 5.0 50.0 150.0 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. HER, Yellow, Green, Orange Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration - HER, Orange. 9 Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration - Yellow. 90 4.0 GREEN SERIES 80 70 60 YELLOW SERIES 50 HER SERIES, ORANGE SERIES 40 30 20 10 0 1 2 3 hV - RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA PER SEGMENT) Figure 10. Maximum Allowable DC Current vs. Ambient Temperature. RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 10 mA) IF - FORWARD CURRENT PER SEGMENT - mA Figure 9. Maximum Tolerable Peak Current vs. Pulse Duration - Green. 4 VF - FORWARD VOLTAGE - V Figure 11. Forward Current vs. Forward Voltage. 5 3.5 3.0 2.5 2.0 HER, YELLOW, GREEN, ORANGE 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 Electrical/Optical For more information on electrical/optical characteristics, please see Application Note 1005. Contrast Enhancement For information on contrast enhancement please see Application Note 1015. YELLOW SERIES 1.5 HER SERIES, ORANGE SERIES 1.4 1.3 GREEN SERIES 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0 10 20 30 40 50 60 70 80 90 100 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA IF - DC FORWARD CURRENT - mA Figure 12. Relative Luminous Intensity vs. DC Forward Current. 1.6 Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. Intensity Bin Limits (mcd) AlGaAs Red Orange HDSP-H15x IV Bin Category HDSP-H40x/K40x IV Bin Category Min. Max. Min. Max. 0.77 1.17 K 9.20 16.90 B L 13.80 25.30 C 0.95 1.45 M 20.70 38.00 D 1.19 1.82 N 31.10 56.90 E 1.49 2.27 85.40 F 1.85 2.89 G 2.32 3.54 H 2.90 4.43 O 46.60 HER HDSP-550x/552x IV Bin Category E Min. Max. 0.91 1.67 F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.62 8.64 J 6.93 12.70 Color Bin K 10.39 19.04 Yellow 1 581.50 585.00 3 584.00 587.50 2 586.50 590.00 4 589.00 592.50 2 573.00 577.00 3 570.00 574.00 4 567.00 571.00 5 564.00 568.00 Color Categories Yellow HDSP-570x/572x IV Bin Category Min. Max. D 0.61 1.11 E 0.91 1.67 F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.62 8.64 J 6.93 12.70 K 10.39 19.04 Green Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. Green HDSP-560x/562x IV Bin Category Min. Max. E 0.91 1.67 F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.61 8.46 For product information and a complete list of distributors, please go to our web site: Dominant Wavelength (nm) Min. Max. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5988-4273EN AV02-1107EN - January 15, 2010